Paulie Posted April 10, 2018 Share Posted April 10, 2018 How tidy do you keep your station and bench? I’m curious about dust, spilled powder, debris, etc. Say on scale of 1-10 with basic mile markers below. 10- Immaculate- Intel could make chips at my bench. 7.5 Very clean. Frequently dust and always collect spilled powder even if it’s a single granule. 5 Moderate. Clean every few sessions or if dust / powder accumulates. 2.5 As- needed to prevent major accumulation...don’t feel the need very often. 0- Meh. Time is for shooting, not housekeeping. I’m in my garage and also do wood work there so dust is an issue more than spills. Curious what you guys do... Link to comment Share on other sites More sharing options...
George16 Posted April 10, 2018 Share Posted April 10, 2018 (edited) 7.5. I always clean after reloading. My reloading room is also my music room where I keep my guitars and amps. I also have my stereo and turntable so I can play my vinyl records while reloading or doing any gun maintenance. Edited April 10, 2018 by George16 Link to comment Share on other sites More sharing options...
Don_B Posted April 10, 2018 Share Posted April 10, 2018 Once I get through all the clutter mine is a 7.5 but until then I have to admit to a 2.5. ? Link to comment Share on other sites More sharing options...
Rustygun Posted April 10, 2018 Share Posted April 10, 2018 I am also in the garage and my other hobbies (like woodworking) make dust and clutter. People ask me what I make in my shop and my typical response is “mostly sawdust”. I have the press mounted permanently on one end of the bench and it is covered with a canvas bag between sessions. All the reloading stuff is modular. One box of common gear that is used for all calibers goes from the metal filing cabinet to the bench, then caliber specific components come from the filing cabinet as needed. after every session everything goes back into the filing cabinet and the bench and the reloading area is blown off with an air hose or a bench brush. I would rate mine about 2.5 as there is always a project or two cluttering up the bench and dust builds up in the corners and under things. Link to comment Share on other sites More sharing options...
Tom S. Posted April 10, 2018 Share Posted April 10, 2018 To paraphrase an old saying, if a cluttered bench is the sign of a cluttered mind, what's an empty bench the sign of? Link to comment Share on other sites More sharing options...
IHAVEGAS Posted April 10, 2018 Share Posted April 10, 2018 1 hour ago, Tom S. said: To paraphrase an old saying, if a cluttered bench is the sign of a cluttered mind, what's an empty bench the sign of? A long winter. Link to comment Share on other sites More sharing options...
Paulie Posted April 10, 2018 Author Share Posted April 10, 2018 2 hours ago, Rustygun said: I am also in the garage and my other hobbies (like woodworking) make dust and clutter. People ask me what I make in my shop and my typical response is “mostly sawdust”. I have the press mounted permanently on one end of the bench and it is covered with a canvas bag between sessions. All the reloading stuff is modular. One box of common gear that is used for all calibers goes from the metal filing cabinet to the bench, then caliber specific components come from the filing cabinet as needed. after every session everything goes back into the filing cabinet and the bench and the reloading area is blown off with an air hose or a bench brush. I would rate mine about 2.5 as there is always a project or two cluttering up the bench and dust builds up in the corners and under things. Do you run your shop vac with a dust catch water bucket? I’m looking at building one to save my filters and cut down fine dust. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted April 10, 2018 Share Posted April 10, 2018 0 -3. Link to comment Share on other sites More sharing options...
Sarge Posted April 10, 2018 Share Posted April 10, 2018 7.5+ Link to comment Share on other sites More sharing options...
Dwbsig Posted April 10, 2018 Share Posted April 10, 2018 I keep mine about 7.5 don't get much spilled powder either. Link to comment Share on other sites More sharing options...
wgj3 Posted April 10, 2018 Share Posted April 10, 2018 I wish mine was better, but with all the interruptions from others, it stays around a 1.5-2 Link to comment Share on other sites More sharing options...
jkrispies Posted April 10, 2018 Share Posted April 10, 2018 (edited) I do my level best to maintain a 7.5 but life (which rhymes with wife) keeps it around a 2.5. 2.5 for me means, I can get all my work done and find my tools with minor effort, but I’d be ashamed to let anybody else see it in this state. Edited April 10, 2018 by jkrispies Link to comment Share on other sites More sharing options...
Doublehelix Posted April 10, 2018 Share Posted April 10, 2018 Easily a 7.5 or higher. I hate clutter and mess. Link to comment Share on other sites More sharing options...
RocketRyan Posted April 10, 2018 Share Posted April 10, 2018 2.5 for me. If it is not a night I load on, I will go in and clean it up from time to time. When I load that is all I focus on and close up shop right away. It is easier for me to walk away since it is in a shed and not a room in the house. Link to comment Share on other sites More sharing options...
4n2t0 Posted April 10, 2018 Share Posted April 10, 2018 10+ Link to comment Share on other sites More sharing options...
GrumpyOne Posted April 10, 2018 Share Posted April 10, 2018 I'd have to clean mine off to even see if there was a bench under all the stuff. Link to comment Share on other sites More sharing options...
Cuz Posted April 10, 2018 Share Posted April 10, 2018 I'd have to clean mine off to even see if there was a bench under all the stuff.Ditto, my bench is a lot like my Glock. It only gets cleaned when it stops working, which is practically never. Link to comment Share on other sites More sharing options...
Paulie Posted April 11, 2018 Author Share Posted April 11, 2018 1 hour ago, Cuz said: Ditto, my bench is a lot like my Glock. It only gets cleaned when it stops working, which is practically never. funny Link to comment Share on other sites More sharing options...
matteekay Posted April 11, 2018 Share Posted April 11, 2018 Maybe like a 6? Painting the surface of my bench a gloss black was the best/worst thing I've done as now it shows powder whenever I drop any. I guess I could use all AutoComp and no WST and then it would just blend in? Link to comment Share on other sites More sharing options...
lefty o Posted April 11, 2018 Share Posted April 11, 2018 not as clean as it should be, but there is no spilled powder, nor loose primers on it. Link to comment Share on other sites More sharing options...
Bullett Posted April 11, 2018 Share Posted April 11, 2018 I keep mine clean probably around a 7.5. My bench top is a piece of laminate counter top we tore out before we had granite installed. It makes for very easy cleaned up between reloading sessionsSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 11, 2018 Share Posted April 11, 2018 (edited) I’ll give mine a 9.5 ... It looks like this at all times. (650 in 9mm w/ Mr Bulletfeeder) Edited April 11, 2018 by MemphisMechanic Link to comment Share on other sites More sharing options...
124gr9mm Posted April 11, 2018 Share Posted April 11, 2018 On 4/9/2018 at 11:25 PM, George16 said: 7.5. I always clean after reloading. My reloading room is also my music room where I keep my guitars and amps. I also have my stereo and turntable so I can play my vinyl records while reloading or doing any gun maintenance. Same situation with me. My bench is in a spare room that's also our music room and my home office 2 days a week, so it's not a dedicated space for reloading. There's no live ammo in that room (my own rule), and I try to keep it as clean as possible so I can be as efficient as possible when reloading. It's usually 7.5, but sometimes will get down to the 5 range (but never below). Link to comment Share on other sites More sharing options...
obsessiveshooter Posted April 16, 2018 Share Posted April 16, 2018 Since I have a Lee loadmaster for .40 and a Lee pro 1000 for 9mm, my bench is always covered in tools, crushed primers I had to dig out, finished cartridges with sideways primers, and spilled powder from the cartridges that didn't prime successfully. I figure on about 8% wasted components. And a mess. But the cartridges that make it through primed shoot great! I include a pic just so you guys can feel better about your own setup. Sent from my SM-N910V using Tapatalk Link to comment Share on other sites More sharing options...
Steve RA Posted April 16, 2018 Share Posted April 16, 2018 Remove all the priming equipment from the presses and prime as the last step of case prep with a hand primer and you'll do away with most of your problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now