copterdrvr Posted November 7, 2018 Share Posted November 7, 2018 Picked up a couple bricks of Win small pistol primers on sale the other day....... The priming compound is bright red and I've found that to be a great benefit with these primers. When I started loading these primers on the primer tray I noticed some of the primers on the tray had little to any "red" showing in the cups and I immediately culled those. after loading around 500 of these primers, I've had to cull between 5 and 10 primers per hundred from each box. The primers culled had none to less than half the amount of priming compound in the cups as compared to the majority of the primers. I normally use CCI primers for, well, everything and was wondering if anyone else has seen this with Winchester primers? Link to comment Share on other sites More sharing options...
George16 Posted November 7, 2018 Share Posted November 7, 2018 Never had any problems with winchester primers whether they are bright red or not. Link to comment Share on other sites More sharing options...
RickT Posted November 7, 2018 Share Posted November 7, 2018 Not problems with either Winchester or CCI. I switched to the slightly softer Win primers to ensure detonation in my EDC (practice rounds only of course) Link to comment Share on other sites More sharing options...
Frank705 Posted November 7, 2018 Share Posted November 7, 2018 Been using Winchester in my 9mm for 2 Years now after comparing to Rem and CCI. I found the Winchester to be the most consistent and softer then the CCI. Never bothered me that the Red Color was more or less in a cup. Also found that the CCI primers delivers 20 FPS less velocity then win or rem. Found Rem to be the softest of the 3. Just my results your mileage may vary. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Furrly Posted November 7, 2018 Share Posted November 7, 2018 Next to federal primers, Win are 2nd best. Not a fan of CCI Link to comment Share on other sites More sharing options...
B_RAD Posted November 7, 2018 Share Posted November 7, 2018 Win are great. Never had any issues. The seat deeper than most and are fairly soft! I wouldn't sweat it. Link to comment Share on other sites More sharing options...
Matt1911 Posted November 7, 2018 Share Posted November 7, 2018 Win, CCI, and federal have always been reliable for me. I don't ever pull any due to color, I just load em and shoot. Link to comment Share on other sites More sharing options...
GregJ Posted November 7, 2018 Share Posted November 7, 2018 Been using Win SPP for many years. Never culled one due to color, never had a primer related misfire (that I recall). Dont sweat it. Load em & shoot em. Link to comment Share on other sites More sharing options...
Beef15 Posted November 7, 2018 Share Posted November 7, 2018 Use Win almost exclusively. Have seen some that appeared less than perfect. They still did their job. You should load some or all your culls and keep them seperate as an experiment. May save you a few seconds and pennys in the future, or it might alert us to a potential as yet unnoticed QC failure from Win. Link to comment Share on other sites More sharing options...
Ssanders224 Posted November 7, 2018 Share Posted November 7, 2018 I order Win SPPs by the million. Very, very rarely have a primer issue. Stop inspecting so much, and go out and shoot. They will probably all fire just fine. Link to comment Share on other sites More sharing options...
Stuey Posted November 7, 2018 Share Posted November 7, 2018 Only use WSP in my pistols. Had too many issues with CCI in my pistols. Now only use CCI in my rifle. Got a love hate relationship with CCI.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
36873687 Posted November 7, 2018 Share Posted November 7, 2018 Never had issue with Winchester my second choice Link to comment Share on other sites More sharing options...
usmc90 Posted November 7, 2018 Share Posted November 7, 2018 Never an issue with Winchester primers use them all in pistol and rifle Load your “culled “ ones. You will NOT notice any difference Link to comment Share on other sites More sharing options...
Catmanduex Posted November 7, 2018 Share Posted November 7, 2018 The only primer I have failures with is Winchester. I actually prefer Remington. Link to comment Share on other sites More sharing options...
muncie21 Posted November 8, 2018 Share Posted November 8, 2018 9 hours ago, Ssanders224 said: I order Win SPPs by the million. Not sure if you're ordering for a team/department or other. I needed to wrap my head around 1M (1,000,000) per year and this is what i came up with- >2,700 rounds per day, each and every day of the year Now that's some dedication and a serious callous on your booger picker Link to comment Share on other sites More sharing options...
mveto Posted November 8, 2018 Share Posted November 8, 2018 Winchester’s have been great for me, I loaded up 12k this past year and have zero issues. I have never culled a single one, actually never even thought of doing it. Link to comment Share on other sites More sharing options...
Darby10 Posted November 8, 2018 Share Posted November 8, 2018 I prefer federal, but Winchester is my second choice, and have worked perfectly for me. Link to comment Share on other sites More sharing options...
R1valdez Posted November 8, 2018 Share Posted November 8, 2018 Same here Federal then Winchester . Never had a problem with any of them. Link to comment Share on other sites More sharing options...
mcattack Posted November 8, 2018 Share Posted November 8, 2018 (edited) I have had issues with the last bunch of Winchester I bought. Some miss fires but also noticed hard to load in my frankford primer filler with them getting stuck and some were hard to get in the Dillon primer tube, went back to CCI and no issues so far. Edited November 8, 2018 by mcattack Link to comment Share on other sites More sharing options...
MemphisMechanic Posted November 8, 2018 Share Posted November 8, 2018 2 hours ago, muncie21 said: Not sure if you're ordering for a team/department or other. I needed to wrap my head around 1M (1,000,000) per year and this is what i came up with- >2,700 rounds per day, each and every day of the year Now that's some dedication and a serious callous on your booger picker If you order ammo from Precision Delta, you’re ordering from him. Make more sense now? Link to comment Share on other sites More sharing options...
LilBunniFuFu Posted November 8, 2018 Share Posted November 8, 2018 4 hours ago, muncie21 said: Not sure if you're ordering for a team/department or other. I needed to wrap my head around 1M (1,000,000) per year and this is what i came up with- >2,700 rounds per day, each and every day of the year Now that's some dedication and a serious callous on your booger picker You really should see it but when he is actually training normally. Link to comment Share on other sites More sharing options...
Service Desk Posted November 8, 2018 Share Posted November 8, 2018 15 hours ago, copterdrvr said: was wondering if anyone else has seen this with Winchester primers? Yep... seen plenty like that and they all worked just fine. The red stuff could be a "glue" that holds all the parts of the primer in the positions that they should be. Federal SPP's used to have green stuff and Fiocchi have red stuff. It doesnt seem to matter too much. Link to comment Share on other sites More sharing options...
stick Posted November 8, 2018 Share Posted November 8, 2018 I never had an issue with the red missing from the primer cup, but I only use Winchester Large primers for my 45. I got a deal on CCI, so I use them for 9mm and PCC. Since I mostly shoot PCC and I use a Hiperfire trigger, I don't have any issues with CCI. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted November 8, 2018 Share Posted November 8, 2018 Before the Russian primers cut my costs way down, I used only Winchester primers .. Never had a problem with them. Of course, I've never had a problem with a Russian primer, either Link to comment Share on other sites More sharing options...
muncie21 Posted November 8, 2018 Share Posted November 8, 2018 7 hours ago, MemphisMechanic said: If you order ammo from Precision Delta, you’re ordering from him. Make more sense now? Wow, interesting factoid. Yep, makes absolute sense now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now