Tango Posted November 2, 2019 Share Posted November 2, 2019 Just now, Tango said: i dont think the grip can flex so much with adding tape, to me the issue seems to be the mags are too tight when adding the +2 (23 rounds total) and the feedlips allow a bullet to slip into the chamber because of excessive pressure the mags are extremely tight if I put 23 rounds in them the mags are so tight with the +2 that i have trouble even racking the slide Link to comment Share on other sites More sharing options...
Rich406 Posted November 2, 2019 Share Posted November 2, 2019 26 minutes ago, Tango said: i dont think the grip can flex so much with adding tape, to me the issue seems to be the mags are too tight when adding the +2 (23 rounds total) and the feedlips allow a bullet to slip into the chamber because of excessive pressure the mags are extremely tight if I put 23 rounds in them If you want to load to 23 and have it consistently reloadable, you need to use a grams follower and spring. Link to comment Share on other sites More sharing options...
Tango Posted November 2, 2019 Share Posted November 2, 2019 1 minute ago, Rich406 said: If you want to load to 23 and have it consistently reloadable, you need to use a grams follower and spring. there are multiple spring types and followers, which combination do you suggest? Link to comment Share on other sites More sharing options...
Rich406 Posted November 2, 2019 Share Posted November 2, 2019 48 minutes ago, Tango said: there are multiple spring types and followers, which combination do you suggest? the grams follower and spring for a p320 140mm magazine Link to comment Share on other sites More sharing options...
jcc7x7 Posted November 3, 2019 Share Posted November 3, 2019 My TTI's with Grams springs and followers work Great 23 no problem Link to comment Share on other sites More sharing options...
Akkid17 Posted November 3, 2019 Share Posted November 3, 2019 I kept my stock followers and I can fit 23 in them but only load 22 so they are reloadable but if I want insurance I’ll Barney up and then use a mag at make ready that has 23 in it since I have the time to make sure it is secured. Other wise I’ll just load 22 and have a Barney mag and start the stage with 23 in the Gun. Link to comment Share on other sites More sharing options...
Rolex Posted November 3, 2019 Share Posted November 3, 2019 Grams have been out of stock- I contacted Grams twice to make a purchase- 2 months now still no call/email back from him! Link to comment Share on other sites More sharing options...
RH45 Posted November 3, 2019 Share Posted November 3, 2019 12 minutes ago, Rolex said: Grams have been out of stock- I contacted Grams twice to make a purchase- 2 months now still no call/email back from him! He’s a really nice guy, but, almost impossible to get in touch with Link to comment Share on other sites More sharing options...
Cowboy1629 Posted November 3, 2019 Share Posted November 3, 2019 They are in stock at Shooters Connection when I checked yesterday. Link to comment Share on other sites More sharing options...
Rolex Posted November 4, 2019 Share Posted November 4, 2019 On 11/3/2019 at 9:10 AM, Cowboy1629 said: They are in stock at Shooters Connection when I checked yesterday. Ordered 3 this AM- already on the way- Thanks Link to comment Share on other sites More sharing options...
eboadway Posted November 4, 2019 Share Posted November 4, 2019 On 11/3/2019 at 8:40 AM, Rolex said: Grams have been out of stock- I contacted Grams twice to make a purchase- 2 months now still no call/email back from him! Springer has them too. Link to comment Share on other sites More sharing options...
zhunter Posted November 5, 2019 Share Posted November 5, 2019 What is the story on the Henning +6 basepads? Is 27 a possibility or are they just for the 17 rounders to get to 23? Link to comment Share on other sites More sharing options...
Posvar Posted November 5, 2019 Share Posted November 5, 2019 https://www.henningshop.com/Detail.aspx?PROD=1434882&CAT=10068 Link to comment Share on other sites More sharing options...
021411 Posted November 5, 2019 Share Posted November 5, 2019 Anyone have the Burke competition trigger and the GGI competition trigger? If you do, swap in the Burke striker assembly into the gun with the GGI trigger. Oh man.. it’s nice. It has the nice snappy break with very minimal over travel. Feels lighter and shows on a pull gauge. Although my Burke trigger is nice it has way too much overtravel. Link to comment Share on other sites More sharing options...
firerain Posted November 5, 2019 Share Posted November 5, 2019 On 11/2/2019 at 6:17 PM, Rich406 said: the grams follower and spring for a p320 140mm magazine Good to know. Thanks Link to comment Share on other sites More sharing options...
Akkid17 Posted November 6, 2019 Share Posted November 6, 2019 Max Michel posted earlier today, can’t help but notice the lack of LCI. LOL also could this be the early stages of the P320 MAX? Link to comment Share on other sites More sharing options...
dansedgli Posted November 6, 2019 Share Posted November 6, 2019 Doesn't that say barsto on it. Link to comment Share on other sites More sharing options...
Posvar Posted November 6, 2019 Share Posted November 6, 2019 Pretty sure Dan Bedell fitted those barrels and also machined the slides for a direct fit for the optics for Max. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 6, 2019 Share Posted November 6, 2019 Hello: Looks like no front sight cut as well. Maybe Sig is actually listening? Thanks, Eric Link to comment Share on other sites More sharing options...
Akkid17 Posted November 6, 2019 Share Posted November 6, 2019 I’d certainly be interested in one of these if they were to sell the upper as a package deal set up like this Link to comment Share on other sites More sharing options...
cjmill87 Posted November 6, 2019 Share Posted November 6, 2019 Link to comment Share on other sites More sharing options...
bimmer1980 Posted November 9, 2019 Share Posted November 9, 2019 Hey guys, if i push on my slide i can move it almost a milimeter down to the grip module, if i stop pushing it, it comes back up. Is that a thing to worry about or is that normal? Link to comment Share on other sites More sharing options...
Posvar Posted November 9, 2019 Share Posted November 9, 2019 3 hours ago, bimmer1980 said: Hey guys, if i push on my slide i can move it almost a milimeter down to the grip module, if i stop pushing it, it comes back up. Is that a thing to worry about or is that normal? It’s normal. Link to comment Share on other sites More sharing options...
bimmer1980 Posted November 9, 2019 Share Posted November 9, 2019 5 minutes ago, Posvar said: It’s normal. Thanks ! Link to comment Share on other sites More sharing options...
firerain Posted November 10, 2019 Share Posted November 10, 2019 17 hours ago, bimmer1980 said: Hey guys, if i push on my slide i can move it almost a milimeter down to the grip module, if i stop pushing it, it comes back up. Is that a thing to worry about or is that normal? It is 'normal' on legion, but never seen that on any other hand guns. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now