Shmella Posted November 29, 2020 Share Posted November 29, 2020 18 hours ago, UpYoursPal said: Went back and assembled it according to some of the videos on the PT YouTube page and it feels more normal now I know exactly what the issue is. When disassembling/reassembling you got something under or behind the locking block thing. This only every happened when reassembling after a lazy cleaning. If a chunk of something gets under the locking block it messes with the way that block interacts with the barrel and will do that. Never happened when shooting but did when I reassembled the gun dirty. Crud doesn’t really get under there unless the gun is apart so it was a non issue for shooting but keep that area clean before putting it back together. Clean out the frame directly where the locking block sits and I’m sure it will entirely go away. I’ve never read that anywhere else. It was always smooth as butter and locks and unlocks super easy other than when I took it apart and reassembled a few times, seeming randomly that would happen. I thought it was just too dirty at first until I found out that one area that changes the way the locking block sits. An early giveaway of stuff under the locking block is how easily the slide stop goes in and out. When reassembling, if the slide stop doesn’t want to go in as easy as it came out (or as easily as any other 2011) take the slide off and clean the spot in the frame the block sits and try again. If the slide stop goes in easy there isn’t anything under the locking block and you’ll be smooth sailing. Link to comment Share on other sites More sharing options...
JJB05 Posted November 30, 2020 Share Posted November 30, 2020 (edited) On 11/29/2020 at 10:08 AM, RangerTrace said: I'm not saying he is wrong, but that's easily 3 times the amount of oil I use. Pistol looked and sounded slick, though. I oil the hell out of it, as they describe in the video, and have not had one issue with the functioning of the gun. i have now put almost 4k through it without a malfunction. They recommend running it very wet, and wet it shall be. Edited November 30, 2020 by JJB05 Link to comment Share on other sites More sharing options...
Chillywig Posted December 1, 2020 Share Posted December 1, 2020 On 11/29/2020 at 5:18 AM, muncie21 said: PT put together a video on how to oil the Honcho, as it is a little different than a standard 1911/211, at least in their eyes. Oiling the Honcho Video Wonder how much Exxon stock that dude owns! LOL Link to comment Share on other sites More sharing options...
Posvar Posted December 1, 2020 Share Posted December 1, 2020 2 minutes ago, Chillywig said: Wonder how much Exxon stock that dude owns! LOL Haha! I admit I was thinking it Link to comment Share on other sites More sharing options...
gnhowell1 Posted December 1, 2020 Share Posted December 1, 2020 He clearly wipes his lenses after the first stage... Link to comment Share on other sites More sharing options...
cbrussell Posted December 1, 2020 Share Posted December 1, 2020 Just watched the video. That is a whole lot of oil, however, they are the manufacturer and should know what makes their guns tick. Wish I could afford one. Link to comment Share on other sites More sharing options...
ltdmstr Posted December 2, 2020 Share Posted December 2, 2020 Seriously? Probably 90% of what he put on there isn't doing anything but pooling in non-contact areas and trapping dust, dirt, powder residue, etc. Link to comment Share on other sites More sharing options...
quiksilverj Posted December 2, 2020 Share Posted December 2, 2020 I'm just excited to finally get this thing next week and hopefully slather it and all the oil I have on the bench Link to comment Share on other sites More sharing options...
cbrussell Posted December 2, 2020 Share Posted December 2, 2020 Hear that? Link to comment Share on other sites More sharing options...
cbrussell Posted December 2, 2020 Share Posted December 2, 2020 Meant to say, hear that!!! Link to comment Share on other sites More sharing options...
quiksilverj Posted December 9, 2020 Share Posted December 9, 2020 well apparently next week is a relative term and it will be again next week..... Link to comment Share on other sites More sharing options...
quiksilverj Posted December 9, 2020 Share Posted December 9, 2020 On 11/6/2020 at 5:58 PM, geraldskip said: Got the email! November 30 or so should be delivery day. I’m stoked. On 11/11/2020 at 9:38 AM, Blockader said: Me too, except I'm mega stoked. Gonna be a looooong November. either of you guys received yours yet? Link to comment Share on other sites More sharing options...
Blockader Posted December 9, 2020 Share Posted December 9, 2020 2 hours ago, quiksilverj said: either of you guys received yours yet? Waiting patiently! Link to comment Share on other sites More sharing options...
quiksilverj Posted December 9, 2020 Share Posted December 9, 2020 trying to but getting harder haha. I've had 2 can's make it through their whole jailtime since I ordered Link to comment Share on other sites More sharing options...
geraldskip Posted December 10, 2020 Share Posted December 10, 2020 On 12/9/2020 at 9:38 AM, quiksilverj said: either of you guys received yours yet? Mine was shipped today actually! So this weekend will be a good one. Link to comment Share on other sites More sharing options...
Blockader Posted December 15, 2020 Share Posted December 15, 2020 Got my Honcho. So good. llo_20201214_213836_1.mp4 Link to comment Share on other sites More sharing options...
Blockader Posted December 15, 2020 Share Posted December 15, 2020 Slow mo. llo_20201214_213836_2_1.mp4 Link to comment Share on other sites More sharing options...
quiksilverj Posted December 15, 2020 Share Posted December 15, 2020 picked mine up over the weekend. its running great! Sure was a long 39 weeks though. Link to comment Share on other sites More sharing options...
geraldskip Posted December 16, 2020 Share Posted December 16, 2020 Got mine!! It is awesome so far. Trigger is at 2 1/4 lbs and perfect. Fit and finish are great. I’m going to do lots of shooting tomorrow and test it out thoroughly. Link to comment Share on other sites More sharing options...
gnhowell1 Posted December 16, 2020 Share Posted December 16, 2020 I was thrilled how mine turned out...yeah, it took a little longer than expected but still way shorter than others and they put a nice little note in the box which will keep me coming back. Link to comment Share on other sites More sharing options...
Chillywig Posted December 16, 2020 Share Posted December 16, 2020 2 hours ago, gnhowell1 said: I was thrilled how mine turned out...yeah, it took a little longer than expected but still way shorter than others and they put a nice little note in the box which will keep me coming back. Those looks sweet! Who's wolfpack 01? Alaskan bush people? Link to comment Share on other sites More sharing options...
UpYoursPal Posted December 16, 2020 Share Posted December 16, 2020 3 hours ago, gnhowell1 said: I was thrilled how mine turned out...yeah, it took a little longer than expected but still way shorter than others and they put a nice little note in the box which will keep me coming back. This 2-tone look is great Link to comment Share on other sites More sharing options...
geraldskip Posted December 21, 2020 Share Posted December 21, 2020 Got about 500 rounds through it so far. Did a little in each barrel. The sightblock barrel doesn’t like light Ammo. I have purpose built stuff for my 3 gun 2011 and it wouldn’t run the honcho (probably 125 PF). Using stock Speer Lawman or American eagle, it was just as soft as my other gun but obviously with hotter rounds. Shot very well and was zeroed from the factory. The minor open barrel was similar. It wanted a little hotter rounds and shot them very well. The major barrel is where this thing shines. I thought the performance for the other two barrels was good, but not noticeably better than my other custom guns. The major blew my custom 2011 out of the water. Big difference and I was really impressed. Was able to do a 3-4 inch standing free hand group (that’s very good for me) and was also able to do double taps out at 25 yards in the A zone at about .30 splits or so. Comparing it anecdotally to my friends akai and atlas chaos, I’d say it’s very similar, if not better. The overpressure from the honcho is much more pleasant. I don’t know if that’s cause there are no popper holes or what, but it is a heck of a shooter. 10/10. Would buy again. And very well might. Link to comment Share on other sites More sharing options...
tfinnerr Posted March 29, 2021 Share Posted March 29, 2021 Apologies for opening this back up but has anyone gotten a Honcho shipped lately? Trying to get a feel for where the lead times are right now. Are they still hovering around that 7 months timeframe? Thanks! Link to comment Share on other sites More sharing options...
muncie21 Posted March 29, 2021 Share Posted March 29, 2021 I 43 minutes ago, tfinnerr said: Apologies for opening this back up but has anyone gotten a Honcho shipped lately? Trying to get a feel for where the lead times are right now. Are they still hovering around that 7 months timeframe? Thanks! I was recently told 30-32 weeks. Not sure if this is from order or order confirmation, but wasn't important enough for me to go back and ask for clarification. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now