tmz Posted June 14, 2019 Share Posted June 14, 2019 (edited) First attempt at loading coded bullets always been using jacketed hollow points. So my question is “Blue bullets” or “Black bullets” ? both prices seem to be the exact same but no experience with either one trying to get thoughts on what everyone’s using and for what reason. Thanks for any info Tony Edited June 14, 2019 by tmz Link to comment Share on other sites More sharing options...
Rnlinebacker Posted June 14, 2019 Share Posted June 14, 2019 First attempt at loading coded bullets always been using jacketed hollow points. So my question is “Blue bullets” or “Black bullets” ? both prices seem to be the exact same but no experience with either one trying to get thoughts on what everyone’s using and for what reason. Thanks for any info Tony Ibejiheads lol. If not, either of your choices are very good. Blue ships super fastSent from my SM-G973U using Tapatalk Link to comment Share on other sites More sharing options...
BJB Posted June 14, 2019 Share Posted June 14, 2019 Most all coated bullets should work just fine. I've had success with most all of them. Only had one notable company send me bad bullets (and I truly believe that was a mistake on their part, not their normal practice, but I didn't buy from them again.) Most of these manufacturers sell small sample packs so I suggest try a few of each company and determine which you like yourself. I currently use Ibejiheads too. Link to comment Share on other sites More sharing options...
Kilrb Posted June 14, 2019 Share Posted June 14, 2019 I tried Brazos they are good also Link to comment Share on other sites More sharing options...
N3WWN Posted June 14, 2019 Share Posted June 14, 2019 I'm a fan of Acme Bullets ( http://www.acmebullet.com/ ). They are accurate, consistent, the cost is good and they ship super fast (usually delivered in 2 business days). For example, if I order on Wed morning, I usually have the order at my house on Friday. Link to comment Share on other sites More sharing options...
Jim Watson Posted June 14, 2019 Share Posted June 14, 2019 There are a lot of brands of bullets using Hi-Tek coating. A lot of them use the same Magma machine molds. A lot of them are of good quality. Those are pretty well interchangeable no matter the color. Some, like Blue Bullets coat with Something Else. A lot of them work, too. I shot some Blue Bullets and they were a bit different shape from the BBI and Bayou bullets I was accustomed to. So they had to be seated different - shorter OAL. They shot ok. I shot some coated bullets in the Pre-Hi Tek era. The Bull X was great. Some of the others were ok in low velocity rounds like .38 Special and .45 ACP but failed at higher speed in 9mm. One brand successfully made the transition to Hi Tek. Link to comment Share on other sites More sharing options...
Flatland Shooter Posted June 14, 2019 Share Posted June 14, 2019 After several months off the market, I see that the folks that bought out Eggleston Munitions is back to offering bullets on the original website. I really had good luck with the "original" Eggleston bullets and hope the "new" bullets are just as good. Note that any old discount codes are not honored. Link to comment Share on other sites More sharing options...
elguapo Posted June 14, 2019 Share Posted June 14, 2019 After 10K rounds or so I see no reason to change from Blue Bullets for 9X19 SNS casting has better revolver bullets IMO. Link to comment Share on other sites More sharing options...
TrackCage Posted June 14, 2019 Share Posted June 14, 2019 Will little exception, I've shot ACME exclusively for the last three years. With the right discount code, I've found them to be the cheapest and they just work. No reason to change for me. Link to comment Share on other sites More sharing options...
Matt1911 Posted June 14, 2019 Share Posted June 14, 2019 Blue bullets have been very accurate for me. Link to comment Share on other sites More sharing options...
tmz Posted June 15, 2019 Author Share Posted June 15, 2019 I appreciate everyone chiming in, I’m going to go on a few of these sites and order some of the samples give a few different ones a try and see what I like keep any more good info coming in thanks guys ! Link to comment Share on other sites More sharing options...
Furrly Posted June 15, 2019 Share Posted June 15, 2019 Best Bang for your buck.. Blue bullets Link to comment Share on other sites More sharing options...
WmKerle Posted June 15, 2019 Share Posted June 15, 2019 I have shot both of them and just use the Blue Bullets now. The same powder and charge with both but I had a little more smoke with the Black don't know why. Link to comment Share on other sites More sharing options...
Novagunner Posted June 15, 2019 Share Posted June 15, 2019 Both are really good quality. I shoot blue because they ship fast to me, good quality and 10% discount on 10k+. I like that the new ones don’t give smurf fingers also. Link to comment Share on other sites More sharing options...
78Staff Posted June 16, 2019 Share Posted June 16, 2019 Haven't tried blue, but have shot Black (BBI) and Red (Acme). I prefer Acme although in reality the Blacks were fine. Just easier purchasing/better packaging/shipping with Acme. Mailman hates me when the Acme Order arrives lol. Link to comment Share on other sites More sharing options...
jschweg Posted June 16, 2019 Share Posted June 16, 2019 I really like the coating on the blue bullets. Most other coated brands use Hitek, which I've shot a ton of and they always performed great, but at least from my experience, the blue bullets coating produces less smoke overall. This is unimportant if you shoot outdoors most of the time, but I shoot indoors quite a bit.The only thing with blues is that they are undersized at .400, so depending on your barrel, they could be less accurate than other cast bullets which will be .401They make a special order profile for 9mm for .356, but unfortunately it doesnt look like they do that for 40.Sent from my SM-G960U using Tapatalk Link to comment Share on other sites More sharing options...
tmz Posted June 16, 2019 Author Share Posted June 16, 2019 It’s great to have a community like this that give so much great input and information! Thanks guys for all the helpful info. I have placed a few sample orders and can’t wait to give them a try. I don’t have any experience just yet with these coated bullets but after trying the samples I will report back with the little bit of my info that I gather from them. Thanks again and it anyone else feels like chiming in feel free. Thanks Tony Link to comment Share on other sites More sharing options...
Yeti Posted June 16, 2019 Share Posted June 16, 2019 I have used both BBI & Blue Bullets, plus many others and the quality has been good. Price per shipped, at the time I need them is the key factor. ACME, Bayou & SNS fan also, I tend to stick with Bayou & ACME lately. Link to comment Share on other sites More sharing options...
techj Posted June 16, 2019 Share Posted June 16, 2019 I like the Blues (125gr TC) for my 9's as they work well in every one of my firearms & PCC. I like ACME for my revolvers. Have used others such as Bayou & SNS in the past and they have all been good. Link to comment Share on other sites More sharing options...
Eman Posted June 17, 2019 Share Posted June 17, 2019 A word of caution. Watch your crimp with coated bullets. If it is too tight, you can have all kinds of issues like excessive smoke, sideways bullets, poor accuracy..etc. I shoot blue bullets because they shoot great out of my gun (G34 factory barrel), and I like the blue color the coating seems very durable also. I have used a few thousand eagleston munitions bullets and they are good as well. Link to comment Share on other sites More sharing options...
Postal Bob Posted June 17, 2019 Share Posted June 17, 2019 Quote A word of caution. Watch your crimp with coated bullets. If it is too tight, you can have all kinds of issues like excessive smoke, sideways bullets, poor accuracy..etc. Never had such an experience. Overcrimping, and putting a slight "groove" into a coated bullet shouldn't create such extremes as you say. Now, if we're talking plated bullets, overcrimping will certainly cause issues like poor accuracy, sideways bullets, and possible seperation of the plating when fired. Link to comment Share on other sites More sharing options...
fbzero Posted June 18, 2019 Share Posted June 18, 2019 Personally, I have found Blue Bullets to have the best QC/price point of all the options. SNS Casting would be my second choice. In truth, most of these options perform similarly since they are using the same coating, but I think that Blues smoke a bit less without sacrificing anything. There are other options that are just as good and possibly a bit better, but the cost is more. There are other options that are a bit cheaper, but I haven't found their QC to be as good whether it is getting the wrong projectiles mixed in with my order, flakier coating, etc. Link to comment Share on other sites More sharing options...
rishii Posted June 18, 2019 Share Posted June 18, 2019 I’ve been shooting blue bullet for a few years and have been very satisfied with them, they use their own proprietary coating which I’ve pushed to 1500fps without any leading, and they now clean their bullets after coating so no more smurf fingers. last years national survey showed with the exception of open, blue bullets was the number 1 or 2 bullet manufacturer for all divisions Link to comment Share on other sites More sharing options...
doc88 Posted June 21, 2019 Share Posted June 21, 2019 Blue bullets have been very consistent. I believe they also give Enos forum members a discount. Don't hold me to it but I am sure they did at least at one time. Link to comment Share on other sites More sharing options...
tmz Posted June 21, 2019 Author Share Posted June 21, 2019 Thanks again for everyone’s help ! I did try a lot of the suggestions that were given to me and I seem to be pretty pleased so far with blue bullets. I loaded up for this Sunday’s match and will put them to the real test. Thanks again guys and all your help is greatly appreciated. ”doc88” yes they did give me a 5% discount for being a member of the forms. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now