Fo0 Posted October 28, 2018 Share Posted October 28, 2018 What Grip are you using for your PCC? I am thinking about trying the Hogue 15000 with finger grooves or maybe the fingerless Hogue - any others i should look for Thanks Link to comment
3gunnuts Posted October 29, 2018 Share Posted October 29, 2018 I run the FG version and like it for PCC. tried the no FG version last week. Did not like the way it felt when one-handing the gun as much. Grips are very subjective so others may disagree. Link to comment
cking Posted October 29, 2018 Share Posted October 29, 2018 magpul moe k2 + this is more vertical grip handy for short stocks and flat triggers Link to comment
tha1000 Posted October 29, 2018 Share Posted October 29, 2018 I have found the k2 to be more comfortable than the jp version of the hogue grip Link to comment
Xanatos903 Posted October 29, 2018 Share Posted October 29, 2018 I'm running a Magpul MOE wrapped in grip tape. It makes it very easy to one-hand the rifle during movement; it's like my hand is glued to the rifle. Link to comment
Startingover Posted October 29, 2018 Share Posted October 29, 2018 Hogue with the finger grooves Link to comment
Tampa-XD45 Posted October 29, 2018 Share Posted October 29, 2018 41 minutes ago, Startingover said: Hogue with the finger grooves Hogue - Same here on all of of my ARs. https://www.midwayusa.com/product/1151576074/hogue-overmolded-beavertail-pistol-grip-ar-15-with-finger-grooves-rubber Try to handle some other shooters' PCCs with different grips. AR grips are inexpensive. Link to comment
bulldog009 Posted October 29, 2018 Share Posted October 29, 2018 I run the K2, its what I run on all of my ARs. I prefer the grip angle over just about any other grip that I've tried. I don't necessarily run my stock very short, but I feel like the angle of the K2 gives me the best torque and control over the rifle, I can really pull the stock into my shoulder with it. And I've found that my wrist doesn't start hurting by the end of a match with the K2 like it would in the past running an MOE or similar grip. Link to comment
Acer2428 Posted October 29, 2018 Share Posted October 29, 2018 I rely on my grip when entering and exiting shooting positions, running backwards, etc. While shooting most of your gripping traction should be in your left hand so you can have your trigger finger muscles relaxed and not fighting your grip strength. For me that means a K2+ The angle is perfect for manipulation and ripping into and out of positions and the rubbery grip (when dry) does its part well enough that I can still re-position if necessary, but is grippy without requiring a strong hold. Link to comment
MoRivera Posted October 30, 2018 Share Posted October 30, 2018 (edited) 17 hours ago, cking said: magpul moe k2 + this is more vertical grip handy for short stocks and flat triggers I like the MOE K2 + for shorter trigger reaches, like a mil spec-profile Geissele. For my POF flat trigger, I go with the BCM MOD 2, as it's still pretty vertical but brings my trigger reach farther forward. Edited October 30, 2018 by MoRivera Link to comment
mveto Posted October 30, 2018 Share Posted October 30, 2018 Since I live in Cali and we have dump laws I use a Strike Industries Megafin grip, when I go out of state I swap it out for a Ergo Deluxe grip. I have big hands and the Ergo fills the gaps really well. Link to comment
MemphisMechanic Posted October 30, 2018 Share Posted October 30, 2018 (edited) Magpul K2 here. Edited October 30, 2018 by MemphisMechanic Link to comment
JAFO Posted October 30, 2018 Share Posted October 30, 2018 I use an Ergo. I can get a nice high grip on it, but I need to shave my off-side safety down. It rubs uncomfortably at the base of my trigger finger. Link to comment
Glouglou Posted October 31, 2018 Share Posted October 31, 2018 Magpul MOE + on my 2 JP. bigger in hand, good feeling, but as 3gunnuts says, the grips are very subjectives. Link to comment
stick Posted October 31, 2018 Share Posted October 31, 2018 Grips are subjective to hand size and feel. Your hand size will determine the best grip for you. Personally I like the Magpul MOE grips. Link to comment
NoKimberDave Posted October 31, 2018 Share Posted October 31, 2018 I use the B5 grip on all my AR's. It's more vertical, fatter at the front strap, and has a beavertail so that my hand doesn't crowd up on the trigger. Link to comment
Matt1911 Posted November 1, 2018 Share Posted November 1, 2018 I use the basic Magpul MOE on all my rifles except for PCC. PCC I use Magpul MOE K2 just cause I wanted to try it. So far i like it, though i can't tell much of a difference in the grip angle once the buzzer sounds. Link to comment
3gunnuts Posted November 1, 2018 Share Posted November 1, 2018 Just put a K2+ on mine today to try out the grip angle. We will see how it goes Saturday. Link to comment
JAFO Posted November 1, 2018 Share Posted November 1, 2018 (edited) I hadn't seen the K2 or K2+ before. I might try the K2+ out to see if it makes it more comfortable, since I run my PCC stock shorter than my AR. ETA: Primary Arms has the Magpul K2 and K2+, and the BCM Mod 3 grips on sale right now. (https://www.primaryarms.com/MCategories+Grips) Edited November 1, 2018 by JAFO Link to comment
RaylanGivens Posted November 2, 2018 Share Posted November 2, 2018 7 hours ago, 3gunnuts said: Just put a K2+ on mine today to try out the grip angle. We will see how it goes Saturday. Is the only difference between the K2 and K2+ that the K2+ has the rubber overmolding? Do most of you shooting a K2-type grip go with the K2+ overmolded rubber grip? Is there a K2+ with finger grips? I'm using a Hogue grip with the finger moldings and never thought about trying another grip... However... I do notice that I don't get as high a grip as I used to with my Open or Limited pistols... Just figured it didn't matter since I can use my left (support) hand to pull the rifle in to my chest. Link to comment
3gunnuts Posted November 2, 2018 Share Posted November 2, 2018 2 hours ago, RaylanGivens said: Is the only difference between the K2 and K2+ that the K2+ has the rubber overmolding? Do most of you shooting a K2-type grip go with the K2+ overmolded rubber grip? Is there a K2+ with finger grips? I'm using a Hogue grip with the finger moldings and never thought about trying another grip... However... I do notice that I don't get as high a grip as I used to with my Open or Limited pistols... Just figured it didn't matter since I can use my left (support) hand to pull the rifle in to my chest. Rubber texture is the difference. No FG model available. I like the Hogue w/FG for PCC because of how thin it is. I don't use it for my 556 guns because it feels too thin when one-handing a heavy gun. I use an Ergo for 556 guns. I ran 150 rounds today with the K2+ on the PCC and like the relaxed grip angle so far. Will shoot some more tomorrow after installing a TACCOM feed ramp and short brake. Link to comment
JAFO Posted November 2, 2018 Share Posted November 2, 2018 17 hours ago, RaylanGivens said: Is the only difference between the K2 and K2+ that the K2+ has the rubber overmolding? Do most of you shooting a K2-type grip go with the K2+ overmolded rubber grip? Is there a K2+ with finger grips? Yeah, I have a MIAD on my AR, and I use the finger groove frontstrap with it. I was kind of hoping they'd have a MIAD-type grip with the K2 angle, but no luck. I ordered a K2+, since it seemed it would probably be closer to the size of the Ergo I'm using now. Link to comment
WhiteDingo Posted November 5, 2018 Share Posted November 5, 2018 I've been really enjoying the HiperFire grip I've been trying out recently. I have large hands and long fingers, and the reach is perfect. As others have pointed out, grips are very subjective, so your experience may vary. Link to comment
GregJ Posted November 6, 2018 Share Posted November 6, 2018 Just put a Magpul K2+ on my MPX. Feels great so far. Link to comment
RaylanGivens Posted November 10, 2018 Share Posted November 10, 2018 Had been using the Hogue grip with the finger grooves... Put the Magpul K2+ grip on and shot a few matches with it... I like it! I recently shortened my stock by one notch to make it easier to pull the rifle up from a low ready start without it grabbing my shirt... The K2+ grip angle seems to help in this process, although it takes some getting used to... Keeping the K2+... Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now