Jump to content
Brian Enos's Forums... Maku mozo!
blaster113

How common are broken AR9mm firing pins

Recommended Posts

21 hours ago, R1valdez said:

With what trigger?

 JP trigger which is now about 2#.

Share this post


Link to post

Is a 9mm firing pin the same length as a 5.56 with out the extra nub on the end?


Sent from my iPhone using Tapatalk

Share this post


Link to post

I thought I read somewhere someone cut a 556 firing pin down and it worked in a 9mm. Just a thought maybe I’m way off??

 

 

Sent from my iPhone using Tapatalk

 

Share this post


Link to post

Can anyone answer the above question??


Sent from my iPhone using Tapatalk

Share this post


Link to post

I got less than 1k rounds out of my firing pin in my CMMG PCC. This happened during a stage at Ironman a couple years ago. Had to run to my bag to get a backup pistol to finish the stage. Luckily, I had a backup firing pin.

Share this post


Link to post

Ugh! I just broke my second new style firing pin on my GMR-13. Anyone have more news or a fix for this issue?

Share this post


Link to post

I broke a Faxon gen2 at about 800 rounds and some dry fire. They promtly replaced it, but I bought a Taccom. This thing looks tough! The back end is full diameter instead of stepped down, I don’t expect mushrooming. All cuts are radiused. I am ising a Hyperfire EDT with a silver spring from a 24 series, I think it is about 4 pounds. Hope this works. 

Dennis

Share this post


Link to post

Everyone I know who shoots pcc has broken multiple pins. It seems very common. I’m going to try one of the new Taccom pins

Share this post


Link to post

I have yet to break a firing pin. I have used 3 different bolts in my set up CMMG AR9 bolt (about 7k rounds) Taccom Extreme bolt (about 2k rounds) and now a CMMG Guard bolt (about 2k rounds). All with the same trigger although the Guard bolt uses an AR15 firing pin. 

Share this post


Link to post
Posted (edited)

I've broken one. I use the Hiperfire 24C trigger which may account for it, I don't know. I've since put a complete bolt in my range bag ready to go, just in case.

Anyone else with the 24C have firing pin problems?

Edited by MikieM

Share this post


Link to post
3 hours ago, MikieM said:

I've broken one. I use the Hiperfire 24C trigger which may account for it, I don't know. I've since put a complete bolt in my range bag ready to go, just in case.

Anyone else with the 24C have firing pin problems?

 

So far so good.  On a PSA Hybrid bolt and Hiperfire 24C I'm still on the original firing pin at just under 10k rds.

 

Have several other PCC's with PSA and Spinta bolts two using Hiperfire triggers (24E and 24-3G) and one using JP roller trigger. Not nearly as many rounds through those guns but all are still on the original firing pin.

Share this post


Link to post

Not only firing pins but also hammer pins with the 24c trigger 

Share this post


Link to post
8 minutes ago, Bwilmot said:

Not only firing pins but also hammer pins with the 24c trigger 

 

I've not heard of any broken hammer pins with the Hiperfire triggers but a small number of PCC shooters have had problems with the hammer pin holes enlarging over time.  I add a KNS anti-rotate / anti-walk pin set on all my 9mm lowers and so far have not had problems.

Share this post


Link to post

this is a repeat of an earlier post...have any of you rounded the strike end of a real Colt pin and experienced problems?... since the simple rounding I have around 7000 rounds without a problem... rounding will bring the hammer strike closer to the center line of the firing pin

Share this post


Link to post
On 10/5/2017 at 4:21 AM, tyler2you said:

Since the Hiperfires seem to be contributing to the problem, what's the next best option for a trigger in an AR-9?

I use the Elftmann Tactical AR9 trigger.

Share this post


Link to post

My firing pin broke recently.

Under 1000 rounds. This is in my newly built PCC, faxon gen 2 bolt,  Hiperfire 3G trigger lightest pull weight springs. 

I replaced the firing pin with the new taccom firing pin.

Under 1000 rounds and this firing pin is still holding up, though the tip has marks on it- presumably from the firing pin channel. I wonder which 9mm bolts out there have smoother firing pin channels.

Maybe jp?

Share this post


Link to post
4 minutes ago, sbpt1911 said:

My firing pin broke recently.

Under 1000 rounds. This is in my newly built PCC, faxon gen 2 bolt,  Hiperfire 3G trigger lightest pull weight springs. 

I replaced the firing pin with the new taccom firing pin.

Under 1000 rounds and this firing pin is still holding up, though the tip has marks on it- presumably from the firing pin channel. I wonder which 9mm bolts out there have smoother firing pin channels.

Maybe jp?

 

Does the top of the firing pin look beat up?

Share this post


Link to post
5 hours ago, sbpt1911 said:

My firing pin broke recently.

Under 1000 rounds. This is in my newly built PCC, faxon gen 2 bolt,  Hiperfire 3G trigger lightest pull weight springs. 

I replaced the firing pin with the new taccom firing pin.

Under 1000 rounds and this firing pin is still holding up, though the tip has marks on it- presumably from the firing pin channel. I wonder which 9mm bolts out there have smoother firing pin channels.

Maybe jp?

Same deal here, just broke the new taccom with less than 1500 rds. Hyperfire 24c. 

Share this post


Link to post
49 minutes ago, scffacenter1 said:

Same deal here, just broke the new taccom with less than 1500 rds. Hyperfire 24c. 

 

49 minutes ago, scffacenter1 said:

Same deal here, just broke the new taccom with less than 1500 rds. Hyperfire 24c. 

Guess Timmy's products are not as good as he claims.

Share this post


Link to post
6 hours ago, L9X25 said:

 

Does the top of the firing pin look beat up?

I'll take a photo when I get home

Share this post


Link to post
6 hours ago, L9X25 said:

 

Does the top of the firing pin look beat up?

 

You mean as if the hammer is hitting down on it?

Share this post


Link to post

I just broke one in my GMR 15 under 3000 rds.

Share this post


Link to post

New taccom firing pin.

Tip is a little deformed. Actually this is only after aprox 160 rounds

1523409084496602934078.jpg

Share this post


Link to post

Jp gmr-15, broke at around 2000. Stock jp competition  trigger factory installed. Replaced with a new one but haven't shot it that much yet. 

Share this post


Link to post
Posted (edited)
8 hours ago, sbpt1911 said:

New taccom firing pin.

Tip is a little deformed. Actually this is only after aprox 160 rounds

1523409084496602934078.jpg

Had exactly the same problem with a new Taccom firing pin.  Ordered two to replace the orginial pins in two of my Taccom Extreme bolts....one is fine. The other one got beat up and kept "catching" on the firing pin hole.  Pulled it out and this is what it looked like.  Tried cleaning it up, but still have problems.  Waiting on Tim to get some new ones in.  Sometimes things happen and they slip past the inspectors....I'm a patient guy

Edited by Alvin
adding my comments

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×