Bakerjd Posted March 1, 2021 Share Posted March 1, 2021 Looking for something I can use since I cant find titegroup in stock. Currently load DG 135GN bullets with 3.5gn titegroup. Get about a 135pf. Gun is a tanfo stock 2. Link to comment Share on other sites More sharing options...
36873687 Posted March 1, 2021 Share Posted March 1, 2021 Universal clays N320 sports pistol bullseye Link to comment Share on other sites More sharing options...
galt11 Posted March 1, 2021 Share Posted March 1, 2021 I've used N320 very successfully. Its just way more expensive, but cleaner Link to comment Share on other sites More sharing options...
Bakerjd Posted March 1, 2021 Author Share Posted March 1, 2021 Appreciate the info gents. This is my first year reloading. Link to comment Share on other sites More sharing options...
haiedras Posted March 1, 2021 Share Posted March 1, 2021 Vectan ba9.5, ba10, maybe GM3. Hp38, Winchester WST Link to comment Share on other sites More sharing options...
EH2020 Posted March 1, 2021 Share Posted March 1, 2021 Clays, Sport Pistol, HP38/W231 Link to comment Share on other sites More sharing options...
stock Posted March 1, 2021 Share Posted March 1, 2021 Had great results with spot pistol, way cleaner than Titegroup Link to comment Share on other sites More sharing options...
johnmyster Posted March 1, 2021 Share Posted March 1, 2021 (edited) Second for WST in 135 grain 9mm. It's been very useable for me. Good case fill. Probably not as clean as n320. Affordable and (usually) available. 231 and bullseye will do it too. You've got lots of options if you're hurting for powder. AA#2. American Select. Red dot. Clays. Universal. CFE Pistol. Sport Pistol. True Blue. Edited March 1, 2021 by johnmyster Link to comment Share on other sites More sharing options...
CocoBolo Posted March 1, 2021 Share Posted March 1, 2021 No love for TiteGroup from me, too snappy, too hot, too dirty. Just about anything works better, my favorite is N320 then WST (because 8# jugs are cheap), for minor I've used AutoComp and I like it. SR7625, HP-38, Red Dot, Solo1000 to name a few. These days like the Obama days you load what you can get. Link to comment Share on other sites More sharing options...
HesedTech Posted March 1, 2021 Share Posted March 1, 2021 Baker Did you search the forum first before asking this? It’s been covered multiple times, but I’ll add Clean Shot and Sport Pistol work great. Link to comment Share on other sites More sharing options...
Hdiamond Posted March 2, 2021 Share Posted March 2, 2021 For what it’s worth if you watch like a hawk you can snag some TG still. They sell out fast but I’ve managed to get about 20lbs in about a 2 week period. Link to comment Share on other sites More sharing options...
carolina_boy1990 Posted March 2, 2021 Share Posted March 2, 2021 Anyone know where there’s some N320 available? Also what’s a close alternative? Thank! Link to comment Share on other sites More sharing options...
echotango Posted March 2, 2021 Share Posted March 2, 2021 W231. Switched from tg and would never go back. Link to comment Share on other sites More sharing options...
Joe4d Posted March 2, 2021 Share Posted March 2, 2021 download a current burn rate chart,,, pretty much anything from e3 to unique will make decent 9mm minor ammo. Link to comment Share on other sites More sharing options...
ysrracer Posted March 4, 2021 Share Posted March 4, 2021 (edited) On 3/1/2021 at 10:46 AM, CocoBolo said: No love for TiteGroup from me, too snappy, too hot, too dirty. Hey you stole my answer. I wanted to like Titegroup, but I couldn't. Too dirty, and too snappy. I switched to Clays and 231, and have never looked back. In fact, I traded all my Titegroup for Clays, and laughed all the way home. . Edited March 4, 2021 by ysrracer Typo Link to comment Share on other sites More sharing options...
louu Posted March 4, 2021 Share Posted March 4, 2021 Yer not supposed to use clays for 9mm Link to comment Share on other sites More sharing options...
ysrracer Posted March 4, 2021 Share Posted March 4, 2021 14 minutes ago, louu said: Yer not supposed to use clays for 9mm Why? Here's my load for .38 Short Colt, basically a rimmed 9mm. No problems so far. Name: .38 Short Colt: 158gr Berry's RN: Clays 3.5gr: OAL 1.20 Notes:S&W 627 5" Shots: 7 Average: 822 ft/s SD: 18 ft/s Min: 797 ft/s Max: 848 ft/s Spread: 51 ft/s Power Factor Average: 130 Power Factor Low: 125 Power Factor High: 133 Barometric Pressure: 30 in Hg Temperature: 44 F Weight: 158.0 gr. Powder: Clays 3.5gr Bullet: Berry's 158gr RN C.O.A.L.: 1.20 Primer: Fed SPP Case: Starline Link to comment Share on other sites More sharing options...
Tunachaser Posted March 4, 2021 Share Posted March 4, 2021 Any common 9 MM powder is better than Titegroup. Link to comment Share on other sites More sharing options...
MikeBurgess Posted March 4, 2021 Share Posted March 4, 2021 under the current component availability conditions, pretty much anything from E3 to AA9 will get you to workable loads, thats about 50 powders that could work, yes some will be dirty and loud some will be a bit fast burning, and some will have higher ES/SD but the fact remains that almost any of them will work well enough and the difference between the worst and best of them will account for less of your score than an afternoon of practice. Link to comment Share on other sites More sharing options...
Tnbb33 Posted March 5, 2021 Share Posted March 5, 2021 Can you find any of these powders at the moment? Link to comment Share on other sites More sharing options...
Joe4d Posted March 5, 2021 Share Posted March 5, 2021 20 hours ago, MikeBurgess said: under the current component availability conditions, pretty much anything from E3 to AA9 will get you to workable loads, thats about 50 powders that could work, yes some will be dirty and loud some will be a bit fast burning, and some will have higher ES/SD but the fact remains that almost any of them will work well enough and the difference between the worst and best of them will account for less of your score than an afternoon of practice. This X 10 Link to comment Share on other sites More sharing options...
dtsdave Posted March 5, 2021 Share Posted March 5, 2021 Powder valley and midway have had a good flow of powders lately. When they do show up you have to act fast. They sell out pretty quickly. I got 4 lbs of n320 recently. Subscribe to notifications or find some groups that are monitoring the sites and you will increase your chances. Primers are getting silly to find. When they are available they sell out in seconds. Link to comment Share on other sites More sharing options...
Kokeman Posted March 5, 2021 Share Posted March 5, 2021 During the Sandyhook shortage I acquired some Maxium CSB-1. It is supposed to be the same as universal. It shoots great, meters great, and is waaaaayyy cleaner than titegroup. I have loaded almost 15 pounds of it since then and am almost out but luckily a friend that bought some with me has 8 pounds left that I am picking up tomorrow. My point is don't be afraid to try something different, you may find something you like much better. Link to comment Share on other sites More sharing options...
Kokeman Posted March 5, 2021 Share Posted March 5, 2021 On 3/1/2021 at 11:46 AM, CocoBolo said: No love for TiteGroup from me, too snappy, too hot, too dirty. Just about anything works better, my favorite is N320 then WST (because 8# jugs are cheap), for minor I've used AutoComp and I like it. SR7625, HP-38, Red Dot, Solo1000 to name a few. These days like the Obama days you load what you can get. Titegroup is too dirty and smoky. Almost reminds me of my blackpowder days. Link to comment Share on other sites More sharing options...
RH39 Posted March 6, 2021 Share Posted March 6, 2021 On 3/1/2021 at 9:09 PM, carolina_boy1990 said: Anyone know where there’s some N320 available? Also what’s a close alternative? Thank! I’ve seen it pop up at powder valley and graf and son's in the last few days but it didn’t last long. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now