TonytheTiger Posted March 24, 2020 Share Posted March 24, 2020 Anyone got an ETA on these backordered PDI's? My Calvin Elite broke down again and I'm getting the itch to try something new. Link to comment
hello0o0o0o Posted March 24, 2020 Share Posted March 24, 2020 Just now, TonytheTiger said: Anyone got an ETA on these backordered PDI's? My Calvin Elite broke down again and I'm getting the itch to try something new. Â Says this spring on their website but maybe someone else has better insight. Link to comment
TonytheTiger Posted March 24, 2020 Share Posted March 24, 2020 All the Shot videos say late March, but I'm not holding my breath. Link to comment
3tech Posted March 24, 2020 Share Posted March 24, 2020 I inquired with Hiperfire prior to ordering my PDI unit, they said that they would be ready to ship the first week in April. I’ll let you all know when it arrives as I have placed an order about two weeks ago, stay tuned.....Sent from my iPad using Tapatalk Link to comment
Maxamundo Posted March 25, 2020 Share Posted March 25, 2020 I believe shipments are on track to go to dealers by the end of the week. I have two on order through a smaller dealer. Link to comment
marcin c Posted March 27, 2020 Share Posted March 27, 2020 I have an MBX Pro PCC - factory setup, "yellow" recoil spring and their buffer with weakest internal spring.   Ammo between 125-137 PF (124 and 147 gr). Came with POF trigger, around 3.7 pound heavy.. Had regular hammer failure to reset. Installed Triggertech Diamond, instant full auto at 1.5 pound, but even with 3.5 pound ocasionally goes auto and also sometimes failure to reset the hammer... WTF..? I am new to PCC but there must be a working trigger that is also light... ?  Link to comment
philmadxx Posted March 29, 2020 Share Posted March 29, 2020 CMC in my backup gun - awesome trigger. Had Timney for a while, great feel but would go into select fire bursts - wasn't a trigger specific to PCC. JP trigger in my GMR-15. Link to comment
Sean_ht Posted March 29, 2020 Share Posted March 29, 2020 On 2/15/2020 at 4:04 PM, FF112173 said: What is everyone running for drop in triggers? I’d like to stay with reasonable priced options but am willing to look at higher priced ones also. This will be in a build for both USPSA and Steel Challange. Go! A topic on this subject was created in the past. You can find some good suggestions there:   Link to comment
Joe D Posted April 2, 2020 Share Posted April 2, 2020 (edited) I run this one - Brownells # 100-020-432. Breaks under 2 lbs. It is a two stage, but the first stage is very short. The first stage can be removed if you know how. I paid $86 for it. Has gone up to $96 now. Unfortunately it's on back order. It is as good as the RRA trigger. Edited April 2, 2020 by Joe D more info Link to comment
PCKLST Posted April 2, 2020 Share Posted April 2, 2020 I have had the best results with the Timney AR PCC trigger. The little anvil seems to make a difference in reliability. Went through a few other such as Elfman, ect but nothing has been as reliable and consistent as the Timney. Not the lightest pull weight but just keeps running without issue. Link to comment
Bdh821 Posted April 3, 2020 Share Posted April 3, 2020 13 hours ago, PCKLST said: I have had the best results with the Timney AR PCC trigger. The little anvil seems to make a difference in reliability. Went through a few other such as Elfman, ect but nothing has been as reliable and consistent as the Timney. Not the lightest pull weight but just keeps running without issue. Â Is it the gold/yellow one or the black one? Link to comment
PCKLST Posted April 3, 2020 Share Posted April 3, 2020 1 hour ago, Bdh821 said: Â Is it the gold/yellow one or the black one? Gold one. Single stage Link to comment
Startingover Posted April 5, 2020 Share Posted April 5, 2020 Had an Elftmann in my main gun, and a CMC in my back up. After a bunch of screwing around with the Elftmann (including replacement) I now have a CMC in both guns. Link to comment
Texaspaul Posted April 5, 2020 Share Posted April 5, 2020 (edited) Have the Timney in my FTM - works great. , Have a POF in the QC-10, works great. Have a LaRue MBT-1S in CMMG Colt, Ok for price. Just bought a CMC - have not tried. I have two Rise, 525 and 140 and both have failed - will use these in std AR-15 not AR-9. Rise did fix the triggers. Edited April 5, 2020 by Texaspaul Link to comment
Ming the Merciless Posted April 6, 2020 Share Posted April 6, 2020 On 4/3/2020 at 7:44 AM, PCKLST said: Gold one. Single stage  I picked up one of the gold ones on sale a couple of months ago and finally got around to putting it in an PCC I just put together and it wouldn't reset without pushing the trigger forward. I took it apart and it doesn't have a coil spring (trigger spring?) under the trigger. There is a pocket for the spring, but no spring. I replaced it in the PCC with a Hiperfire 24C.  I put a couple drops of oil on the Timney's pivot bushings and put it in a dedicated .22lr lower and it is working fine, resets OK. Trigger pull is around 2lbs. Does your gold Timney have a spring under the trigger? Link to comment
PCKLST Posted April 6, 2020 Share Posted April 6, 2020 I have not looked. I will check it out next time i do some cleaning. Their customer service and warranty are excellent. The fact that it is set at 2lbs instead of the 3lbs that usually come from the factory sounds like someone may have adjusted it to far. Although they say that their triggers are adjustable I have always left them at the factory setting. Link to comment
3tech Posted April 7, 2020 Share Posted April 7, 2020 Got a tracking number today on the PDI I ordered in March from HiperFire, stay tuned. [emoji16][emoji1303]Sent from my iPad using Tapatalk Link to comment
FF112173 Posted April 7, 2020 Author Share Posted April 7, 2020 1 hour ago, 3tech said: Got a tracking number today on the PDI I ordered in March from HiperFire, stay tuned. Sent from my iPad using Tapatalk Me too! Link to comment
ck1 Posted April 7, 2020 Share Posted April 7, 2020 18 hours ago, 3tech said: Got a tracking number today on the PDI I ordered in March from HiperFire, stay tuned. Sent from my iPad using Tapatalk  Cool. Interested how these compare to the Hipertouch ones.. Link to comment
chenault Posted April 8, 2020 Share Posted April 8, 2020 Keep us informed. I'm in the same process of looking for a replacement. Link to comment
3tech Posted April 11, 2020 Share Posted April 11, 2020 Received the Hiperfire PDI unit it the mail late Thursday. Since it’s going into a new build and every range is on intergalactic lock down, I won’t be able to give you a ‘range report.’ I did finish assembling the PCC this morning and the trigger breaks just a little heavier than 2.25 lbs. Resets fairly quick and clean too. That’s all I got for you guys, more when I can get out and play. Stay safe, stay well. [emoji1303]Sent from my iPad using Tapatalk Link to comment
cecil Posted April 14, 2020 Share Posted April 14, 2020 anyone know any dealers that have the new HiperFire PDI triggers in stock ????  tia Link to comment
021411 Posted April 14, 2020 Share Posted April 14, 2020 3 hours ago, cecil said: anyone know any dealers that have the new HiperFire PDI triggers in stock ????  tia Joeboboutfitters has the black and rose gold in stock. They are a legit vendor. Link to comment
021411 Posted April 14, 2020 Share Posted April 14, 2020 On 4/11/2020 at 3:57 PM, 3tech said: Received the Hiperfire PDI unit it the mail late Thursday. Since it’s going into a new build and every range is on intergalactic lock down, I won’t be able to give you a ‘range report.’ I did finish assembling the PCC this morning and the trigger breaks just a little heavier than 2.25 lbs. Resets fairly quick and clean too. That’s all I got for you guys, more when I can get out and play. Stay safe, stay well. Sent from my iPad using Tapatalk How’s the reset compared to the Hiperfire Eclipse and the like? Forceful or weak? Link to comment
3tech Posted April 14, 2020 Share Posted April 14, 2020 I really couldn’t say as I have no prior experience with Hiperfire products. Unable to go to the range as it’s still locked down. Sent from my iPad using Tapatalk Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now