PeterParfinik Posted December 22, 2019 Share Posted December 22, 2019 I am just curious how most people with a pinned compensator go about cleaning them and the barrel crown. Even with jacketed or plated ammunition compensators need to be cleaned, when they are pinned you just can't unscrew them and put a new one on. Just want to hear how people are getting this accomplished. Link to comment
JackinSD Posted December 22, 2019 Share Posted December 22, 2019 I never remove my compensator. I just put enough liquid in my sonic cleaner to submerge the compensator and run it for a few minutes. Then take a brush to it to finish. Link to comment
BlackBuzzard Posted December 23, 2019 Share Posted December 23, 2019 I've never cleaned mine in like 35,000 rounds......only copper plated ammo used. No problems . Probably isnt necessary. JP GMR15 Link to comment
PeterParfinik Posted December 23, 2019 Author Share Posted December 23, 2019 How long to go through 35 K rounds ? Link to comment
rowdyb Posted December 23, 2019 Share Posted December 23, 2019 Same, if the bore snake doesn't get it then it's not coming off. I've done nothing to clean my comp on my jp gmr15 in 6 months of owning it and about 4k rounds through it, all plated 147. Link to comment
BlackBuzzard Posted December 23, 2019 Share Posted December 23, 2019 1 hour ago, PeterParfinik said: How long to go through 35 K rounds ? ever since the JP GMR15 first came available. More than 3 yr I think. Link to comment
egd5 Posted December 23, 2019 Share Posted December 23, 2019 If you soak it in a solution of 1/2 peroxide and 1/2 white vinegar it will eat the crud away. then rinse with baking soda and water solution. Caution--if I remember right it may discolor blued metal though. I think that is what I read when I found out about this. My comp is stainless and it didn't bother mine. Might ought to google it to be sure though. Link to comment
shred Posted December 23, 2019 Share Posted December 23, 2019 Same thing the Open dudes do with their permanently-fixed comps. Ignore it until it's a problem, then chip it out. Link to comment
MemphisMechanic Posted December 23, 2019 Share Posted December 23, 2019 @PeterParfinik are you by any chance coming from more of a precision rifle background? Many of us USPSA types clean things every few thousand rounds (or every few months of regular use) whether they need it or not. Does it shoot straight? Does it run 100%? Run a boresnake through it, oil it, and call it good. Link to comment
longbeard Posted December 23, 2019 Share Posted December 23, 2019 I accomplished this eliminating the need to clean it. I was using Titegroup and coated bullets. This is a nightmare of melted slag and build-up that you cannot overcome because it builds up in a very short time. Sport Pistol cured this as it's not as hot. Now every 5K rounds or so a little screwdriver knocks off the small amount of build-up in there that I could probably just leave. You could also avoid coated or plated bullets. Link to comment
dapribek Posted December 23, 2019 Share Posted December 23, 2019 I used to use a dental pick on my open gun. Link to comment
PeterParfinik Posted December 24, 2019 Author Share Posted December 24, 2019 19 hours ago, MemphisMechanic said: @PeterParfinik are you by any chance coming from more of a precision rifle background? Memphis, I do not. I agree to clean every few thousand rounds. I just always made sure to keep the crown of my firearms clean. When I miss, I know it was not the equipment. Thank you all for the input. Link to comment
mveto Posted December 24, 2019 Share Posted December 24, 2019 I’ll fill a small mason jar with either Slip Carbon Killer or Bore Tech Carbon Remover and dip the brake into the jar and let it soak for a little while, I make sure that only the brake is covered in the carbon remover. I’ll than blast it out with some type of degreaser to remove the Carbon remover. It’s best to remove the upper and make sure that you have the upper supported well before you walk away or else you’ll have a wet work station. Link to comment
Revolution Posted December 24, 2019 Share Posted December 24, 2019 I do the same thing as you but I let it soak in a solution of 50% Hydrogen Peroxide and 50% White Vinegar. However one of the posters here a while ago had the best solution which I have followed and it does work. I just hit the comp with some Frankford Arsenal case lube about 4 or 5 times during the match and the buildup comes off easily with regular cleaner. Link to comment
brian45acp Posted December 24, 2019 Share Posted December 24, 2019 Bore Tech Carbon remover is amazing. My gmr 13 had so much build up I was worried about it contacting the bullet. I shoved a ear plug up the barrel and used masking tape around the comp to seal it. First soak was over night and I did a 45 cal copper brush cleaning the next day then soaked it again. for the first time I can see the company threads again and routine cleaning is just a squirt inside the comp and brush out. This product is amazing and cleaning all carbon build up. Link to comment
CalTeacher Posted December 25, 2019 Share Posted December 25, 2019 I don’t clean mine. Link to comment
Joeyxbat Posted December 27, 2019 Share Posted December 27, 2019 On 12/22/2019 at 11:21 PM, egd5 said: If you soak it in a solution of 1/2 peroxide and 1/2 white vinegar it will eat the crud away. then rinse with baking soda and water solution. This is what I've been doing with my JP pcc since I've been shooting blue bullets. Link to comment
assaultthesalt Posted December 28, 2019 Share Posted December 28, 2019 Boretech Carbon remover is the best stuff on the market ! Soak overnight for best results. Link to comment
J Haas Posted April 27, 2020 Share Posted April 27, 2020 Try the 50/50 distilled white vinegar and hydrogen peroxide to get works ok I cleaned my comp and then polished it to a mirror finish then soaked it with the Dillon brass polish the lanolin in it got this from another thread here and I didn’t think it would work but!! shot 300rds and sprayed it every 100 rds came home and cleaned it carbon was able to be wiped out with a rag almost no scrubbing!!! Link to comment
MoRivera Posted April 27, 2020 Share Posted April 27, 2020 Wire brush attachments on Dremel usually, but am also going to try the peroxide/vinegar solution. MBX Stainless barrel/co.mp combo. Link to comment
DyNo! Posted April 27, 2020 Share Posted April 27, 2020 With the JP, I take a fired .223 case, hammer the mouth shut, and support the JP barrel on a block of wood and beat the crud out with the brass as a chisel. The brass doesn't harm the brake and I can scrape everything, even the radius in the brake. Link to comment
BRadcliffe Posted April 28, 2020 Share Posted April 28, 2020 The peroxide/vinegar definitely works well. Just use it in a well ventilated area. It will eat away at aluminum though! Link to comment
MoRivera Posted April 28, 2020 Share Posted April 28, 2020 I'm going to do the whole vinegar/peroxide...for my MBX stainless barrel/comp I assume it will just affect the lead...but for a phosphate or anodized device like a Law Valley linear comp (the larger 9mm aluminum one, will it strip off the finish as well? I'd like t one able to flush those out too. Should I tape up the outside? I've sued vinegar to remove blueing from barrels before. Link to comment
BRadcliffe Posted April 28, 2020 Share Posted April 28, 2020 It shouldn't bother the finish on the aluminum one. I have a tandem kross aluminum comp on my open rimfire gun and its been in the bath a few times. The finish is still fine, it just ate up the aluminum right around the exit hole. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now