chinnerj Posted November 1, 2019 Share Posted November 1, 2019 Question: anyone here use a different grain bullet for training than for competition? I was thinking for next year I might order all of my training rounds in 115 and stick with 147 for my competition loads in order to save money. An important point I want to make is that I wouldn't plan on changing the charge weight of the powder as I would like to keep the felt recoil the same. I understand that the 115 grain loads would be way under PF, but wouldn't the recoil be the same since it is mostly determined by the charge weight and seating depth of the bullet? Just trying to find ways to save a little money here and there since there is a considerable difference between buying 115 vs. 147 grain projectiles. Link to comment Share on other sites More sharing options...
Khaot1c Posted November 1, 2019 Share Posted November 1, 2019 If the recoil pulse is significantly different then you can expect a point of impact shift. That introduces quite a few variables in your training that may lead to conscious thought on match day such as remembering holds or adjusting to the timing or feel of your match ammo. Sent from my SM-N975U using Tapatalk Link to comment Share on other sites More sharing options...
MikeBurgess Posted November 1, 2019 Share Posted November 1, 2019 11 minutes ago, chinnerj said: Question: anyone here use a different grain bullet for training than for competition? I was thinking for next year I might order all of my training rounds in 115 and stick with 147 for my competition loads in order to save money. An important point I want to make is that I wouldn't plan on changing the charge weight of the powder as I would like to keep the felt recoil the same. I understand that the 115 grain loads would be way under PF, but wouldn't the recoil be the same since it is mostly determined by the charge weight and seating depth of the bullet? Just trying to find ways to save a little money here and there since there is a considerable difference between buying 115 vs. 147 grain projectiles. Most 115g loads will make PF just fine in most guns, I ran 115 Federal aluminum case stuff at one and Blazer Brass at another L2 match and both times made PF with a decent margin (130ish) That said try shooting some and see how it feels, then try mixing some with your 147s in a mag and shoot a drill, you may be surprised to see how little difference there is in what the sights are doing. Link to comment Share on other sites More sharing options...
HesedTech Posted November 1, 2019 Share Posted November 1, 2019 Yes you can use the same bullet in a lighter weight to save a few dollars, as long as the powder charge is the same. You won’t notice any real difference in recoil, but you may see a difference in accuracy. The real question is how many $ will you save over the extra work of keeping the two loads separated and not accidentally mixing them and then get sent to open at a major match? Link to comment Share on other sites More sharing options...
zzt Posted November 1, 2019 Share Posted November 1, 2019 I always practice with what I'll shoot in matches. Link to comment Share on other sites More sharing options...
stick Posted November 1, 2019 Share Posted November 1, 2019 You will see a point of Aim, point of impact change between the two loads. I'm lost with your reason to use two different loads. Using the same load for practice and competition is pretty much standard. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted November 1, 2019 Share Posted November 1, 2019 3 hours ago, chinnerj said: I might shoot training rounds in 115 gr and stick with 147 for my competition loads to save money. Are you a D or C shooter ? Then you might save a few $$$ that way. Doubt a B shooter, working towards an A card, would want to do that. How many rounds/year are you shooting ? Are you using coated lead bullets to save money ? Link to comment Share on other sites More sharing options...
MikeyScuba Posted November 1, 2019 Share Posted November 1, 2019 2 hours ago, zzt said: I always practice with what I'll shoot in matches. That about sums it up. I try to make practice as close as possible to match conditions. Link to comment Share on other sites More sharing options...
Joe4d Posted November 1, 2019 Share Posted November 1, 2019 umm, WHY ? you wont save much.. train like you fight,, Look for deals. I suspect you could go cheap cast 147's for practice and use Wolf primers,,, then for match ammo go with fed or win primers and 147 coated or jacketed for match ammo. Get same recoil and POI,, save a few bucks Link to comment Share on other sites More sharing options...
superdude Posted November 2, 2019 Share Posted November 2, 2019 Recoil won't be the same if you use the same powder charge. The lighter bullet will have less recoil. What affects recoil: bullet weight, velocity, powder charge weight. The lighter bullets will end up going the same speed as the heavier bullets, or more likely they will be slower, and either of these will reduce recoil. Example: powder charge 5 grains, velocity 1000 fps, 2.5 lb gun; 115 grain bullet = 1.90 ft lbs recoil 147 grain bullet = 3.03 ft lbs recoil Link to comment Share on other sites More sharing options...
RePete Posted November 2, 2019 Share Posted November 2, 2019 14 hours ago, HesedTech said: The real question is how many $ will you save over the extra work of keeping the two loads separated and not accidentally mixing them and then get sent to open at a major match? This^^^^^^^^^ At at PPC match, we had a guy who used 2 loads. 7 and 15 yards and 25 and 50 yards. The powder charges were 3.0gr and 1.7gr. He shot the 7 and 15, shot the 25 and then proceeded to to shoot the 50. When we went down to score his target was clean (I was scoring his targets). I turned around and you could see the impact marks in the ground. From that day he quit using 2 loads. Link to comment Share on other sites More sharing options...
Demp223 Posted November 3, 2019 Share Posted November 3, 2019 No. Waste of time reloading two different loads and keeping them separated. Plus they perform differently. Buy in bulk to save money and load what you’re going to shoot. Link to comment Share on other sites More sharing options...
RGA Posted November 3, 2019 Share Posted November 3, 2019 What the others said. Train as you fight, fight as you train. Don't introduce unnecessary risks. Murphy is always watching. Link to comment Share on other sites More sharing options...
Stuey Posted November 3, 2019 Share Posted November 3, 2019 I train with what i shoot in competition. The cost between 115 and 147 is not worth the training difference. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Jim Watson Posted November 3, 2019 Share Posted November 3, 2019 On 11/1/2019 at 2:21 PM, chinnerj said: but wouldn't the recoil be the same since it is mostly determined by the charge weight and seating depth of the bullet? No. Power Factor is a momentum value, just not in scientific or engineering units, and recoil is a momentum balance. Mass X Velocity. Link to comment Share on other sites More sharing options...
HesedTech Posted November 3, 2019 Share Posted November 3, 2019 8 hours ago, Jim Watson said: but wouldn't the recoil be the same since it is mostly determined by the charge weight and seating depth of the bullet? I didn't say they would not be a difference in recoil impulse using math (yes there's a web app that will calculate that for people). I said, "you won't notice any real difference." Perception of recoil is probably more important than the actual amount. On 11/1/2019 at 1:56 PM, HesedTech said: You won’t notice any real difference in recoil, but you may see a difference in accuracy. Link to comment Share on other sites More sharing options...
Yondering Posted November 4, 2019 Share Posted November 4, 2019 (edited) On 11/1/2019 at 7:46 PM, superdude said: Recoil won't be the same if you use the same powder charge. The lighter bullet will have less recoil. What affects recoil: bullet weight, velocity, powder charge weight. The lighter bullets will end up going the same speed as the heavier bullets, or more likely they will be slower, and either of these will reduce recoil. Example: powder charge 5 grains, velocity 1000 fps, 2.5 lb gun; 115 grain bullet = 1.90 ft lbs recoil 147 grain bullet = 3.03 ft lbs recoil This. The lighter bullet will have less recoil, and it is definitely noticeable between 115gr and 147gr bullets. POI will be different as well, in most guns. YMMV of course. Edited November 4, 2019 by Yondering Link to comment Share on other sites More sharing options...
B_RAD Posted November 4, 2019 Share Posted November 4, 2019 Shoot all 115 gr. Doesn't matter. I just saved you a bunch of money. You're welcome. Link to comment Share on other sites More sharing options...
hankdiesel Posted November 7, 2019 Share Posted November 7, 2019 For minor 9mm I shoot all 147s...train with what you plan to compete with. Link to comment Share on other sites More sharing options...
tomv Posted November 17, 2019 Share Posted November 17, 2019 On 11/1/2019 at 3:21 PM, chinnerj said: Question: anyone here use a different grain bullet for training than for competition? I was thinking for next year I might order all of my training rounds in 115 and stick with 147 for my competition loads in order to save money. An important point I want to make is that I wouldn't plan on changing the charge weight of the powder as I would like to keep the felt recoil the same. I understand that the 115 grain loads would be way under PF, but wouldn't the recoil be the same since it is mostly determined by the charge weight and seating depth of the bullet? Just trying to find ways to save a little money here and there since there is a considerable difference between buying 115 vs. 147 grain projectiles. Recoil is based on momentum, Mass x Velocity. Also known as power factor. The 115 bullet with the 147 bullet powder charge will have significantly less mass resulting in lower pressure resulting in lower velocity. So both mass and velocity will be reduced and there will be a noticeable difference in recoil force. If you play with the charge to get the same power factor for both loads you will still notice a difference in how the gun runs. The slide will cycle much faster with the 115 load. I agree with bthe comment that it's best to practice with what you're using for competition. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now