Boomstick303 Posted May 11, 2020 Share Posted May 11, 2020 Is the question mark a typo ? Yes. Thanks, I will contact them. Thanks for the heads up on the spam/junk box in regards to their response. Link to comment Share on other sites More sharing options...
Fasthenk65 Posted July 1, 2020 Share Posted July 1, 2020 On 9/28/2019 at 6:23 PM, bimmer1980 said: Hey guys! If i use the GG Trigger System, do i stay IPSC PO legal at 3lbs minimum, or do i have to stay with the factory springs to achieve that ? i also like to know... anybody? Link to comment Share on other sites More sharing options...
Fasthenk65 Posted July 1, 2020 Share Posted July 1, 2020 On 11/17/2019 at 3:17 PM, rowdyb said: So I installed my 2nd and 3rd GG kit (w curved triggers) in X5Legions. I did no polish or any extra tuning. Guns both have less than 400 rounds total on them. Stock trigger came in at 4 lbs even on my gauge. I installed the GG kits but for the sear springs I kept the stock ones for a more positive reset. Trigger pull is still measured 4lbs even but less over travel and a nice crisp break and reset. I like it. That will be my way to go to! Tnx Link to comment Share on other sites More sharing options...
bimmer1980 Posted July 3, 2020 Share Posted July 3, 2020 On 7/1/2020 at 9:16 PM, Fasthenk65 said: i also like to know... anybody? I know now. I use the complete GG Kit, with the stock trigger return spring. It´s about 1,5 KG in the middle of the trigger, 1,1 -1,2 KG if you pull on the bottom end. IPSC rule sais, must me messured in the middle of the trigger. So i should be pretty safe. Link to comment Share on other sites More sharing options...
DirectDrive Posted July 3, 2020 Share Posted July 3, 2020 5 hours ago, bimmer1980 said: I know now. I use the complete GG Kit, with the stock trigger return spring. It´s about 1,5 KG in the middle of the trigger, 1,1 -1,2 KG if you pull on the bottom end. IPSC rule sais, must me messured in the middle of the trigger. So i should be pretty safe. The thing with the full kit is that you get the GG sear. I used his light spring kit, but that sear eliminated that creep that is present in every P320 that I have handled. Link to comment Share on other sites More sharing options...
bimmer1980 Posted July 3, 2020 Share Posted July 3, 2020 2 minutes ago, DirectDrive said: The thing with the full kit is that you get the GG sear. I used his light spring kit, but that sear eliminated that creep that is present in every P320 that I have handled. Yes i know. It was about how to stay above 3lbs (1,36KG) for IPSC. Link to comment Share on other sites More sharing options...
Fasthenk65 Posted July 3, 2020 Share Posted July 3, 2020 5 hours ago, bimmer1980 said: I know now. I use the complete GG Kit, with the stock trigger return spring. It´s about 1,5 KG in the middle of the trigger, 1,1 -1,2 KG if you pull on the bottom end. IPSC rule sais, must me messured in the middle of the trigger. So i should be pretty safe. thx!!!!!!!!!!! Link to comment Share on other sites More sharing options...
DirectDrive Posted July 3, 2020 Share Posted July 3, 2020 1 hour ago, bimmer1980 said: Yes i know. It was about how to stay above 3lbs (1,36KG) for IPSC. Regulating pull weight seems to be easy with the P320. Quite an assortment of springs are available for P320 now. Link to comment Share on other sites More sharing options...
bimmer1980 Posted July 4, 2020 Share Posted July 4, 2020 22 hours ago, DirectDrive said: Regulating pull weight seems to be easy with the P320. Quite an assortment of springs are available for P320 now. It really is ! Link to comment Share on other sites More sharing options...
Aggrofish Posted July 5, 2020 Share Posted July 5, 2020 I’ve read this thread a couple times and I’m still a little confused. I have an og 320RX and a 320 x5 legion. While I like the flat trigger and can live with the amount of take up, the creep is horrendous on the X5 and the reset is a mile long. From the wall to the break is just mushy slop. Gray guns adjustable drop in or Sig Armourer ($149 / $300) are the options right? The Keres and the other name I can’t remember only adjust travel right? I only mention the 320RX because it has a better break and reset than the legion which seems odd. Link to comment Share on other sites More sharing options...
Mick-S Posted July 16, 2020 Share Posted July 16, 2020 On 7/5/2020 at 2:01 PM, Aggrofish said: I’ve read this thread a couple times and I’m still a little confused. I have an og 320RX and a 320 x5 legion. While I like the flat trigger and can live with the amount of take up, the creep is horrendous on the X5 and the reset is a mile long. From the wall to the break is just mushy slop. Gray guns adjustable drop in or Sig Armourer ($149 / $300) are the options right? The Keres and the other name I can’t remember only adjust travel right? I only mention the 320RX because it has a better break and reset than the legion which seems odd. I have the standard X5 and started with the GG kit. This removed pretty much all the over travel and a small amount of the pretravel and creep but the trigger felt considerably better and lighter. I recently installed all the stock parts back in and sent it to Burke (The Sig Armourer) and had him do his competition level action job on it. It's night an day difference. it is more than worth the extra $150 over the GG kit. Almost all the pretravel and creep is gone and there is no over travel at all that I can tell. It's Hands down the best striker trigger I've ever felt. it has between a 3 and 3.5lb trigger pull using all stock springs. Link to comment Share on other sites More sharing options...
Aggrofish Posted July 22, 2020 Share Posted July 22, 2020 On 7/16/2020 at 4:09 PM, Mick-S said: I have the standard X5 and started with the GG kit. This removed pretty much all the over travel and a small amount of the pretravel and creep but the trigger felt considerably better and lighter. I recently installed all the stock parts back in and sent it to Burke (The Sig Armourer) and had him do his competition level action job on it. It's night an day difference. it is more than worth the extra $150 over the GG kit. Almost all the pretravel and creep is gone and there is no over travel at all that I can tell. It's Hands down the best striker trigger I've ever felt. it has between a 3 and 3.5lb trigger pull using all stock springs. I ended up getting the Armory Craft adjustable with the GG kit. I haven’t had time to install it yet. Link to comment Share on other sites More sharing options...
jpm2953 Posted July 24, 2020 Share Posted July 24, 2020 I installed the Gray Guns adjustable flat trigger kit in my legion last night. Used the intermediate return spring with the competition sear springs. Trigger dropped from 3.5lb to 2.5lb. Reset dropped about 25% .176" to .130" Link to comment Share on other sites More sharing options...
lennyo3034 Posted July 28, 2020 Share Posted July 28, 2020 Will the gray guns kit prevent the X5 legion from being used in USPSA Production or IDPA SSP? Link to comment Share on other sites More sharing options...
Racinready300ex Posted July 28, 2020 Share Posted July 28, 2020 10 minutes ago, lennyo3034 said: Will the gray guns kit prevent the X5 legion from being used in USPSA Production or IDPA SSP? It's fine in Prod, probably illegal in SSP if you install the trigger. You could run the springs and sear with the stock trigger in SSP though. Link to comment Share on other sites More sharing options...
Boomstick303 Posted July 28, 2020 Share Posted July 28, 2020 (edited) 16 minutes ago, lennyo3034 said: Will the gray guns kit prevent the X5 legion from being used in USPSA Production or IDPA SSP? You can use the GrayGuns trigger in USPSA, and IDPA. I guess there could be a questions in IDPA that the trigger itself would be a visible change. IDPA 8.2.1.2 G. Internal action work may be used to enhance trigger pull as long as safety is maintained (no visible external modifications allowed). Edited July 28, 2020 by Boomstick303 Link to comment Share on other sites More sharing options...
Mick-S Posted August 2, 2020 Share Posted August 2, 2020 (edited) On 7/28/2020 at 2:01 PM, lennyo3034 said: Will the gray guns kit prevent the X5 legion from being used in USPSA Production or IDPA SSP? The Gray guns trigger is illegal in IDPA SSP. You can however install the rest of the kit. I tried it with the GG trigger and with the stock trigger and the rest of GG's kit. I really couldn't tell much difference between the two. The GG's kit with the stock trigger worked great and I stayed legal in IDPA SSP. I shot it like this for about a year before I sent it off to Burke. Edited August 2, 2020 by Mick-S Link to comment Share on other sites More sharing options...
Sumtoc Posted August 3, 2020 Share Posted August 3, 2020 Great thread, IDPA follow up question. I have a 320 X Compact that I want to set up for IDPA CO. I believe that their CO refers to ESP (not SSP) as the basis for equipment rules. So in IDPA CO (ESP), can I assume that an aftermarket trigger like GG will be allowed? Thanks Link to comment Share on other sites More sharing options...
ddc Posted August 3, 2020 Share Posted August 3, 2020 18 hours ago, Sumtoc said: Great thread, IDPA follow up question. I have a 320 X Compact that I want to set up for IDPA CO. I believe that their CO refers to ESP (not SSP) as the basis for equipment rules. So in IDPA CO (ESP), can I assume that an aftermarket trigger like GG will be allowed? Thanks yes, as you noted CO is based upon ESP, no problem with aftermarket trigger in ESP/CO. Link to comment Share on other sites More sharing options...
Stician Posted August 6, 2020 Share Posted August 6, 2020 I have the standard X5 and started with the GG kit. This removed pretty much all the over travel and a small amount of the pretravel and creep but the trigger felt considerably better and lighter. I recently installed all the stock parts back in and sent it to Burke (The Sig Armourer) and had him do his competition level action job on it. It's night an day difference. it is more than worth the extra $150 over the GG kit. Almost all the pretravel and creep is gone and there is no over travel at all that I can tell. It's Hands down the best striker trigger I've ever felt. it has between a 3 and 3.5lb trigger pull using all stock springs. My Legion will arrive at TSA today and I’m looking forward to experiencing this. I sold both of my GG kits and while they were a nice upgrade I prefer the wider flat shape of the factory trigger.... without the GG trigger I also have overtravel. The factory trigger is about 4 lbs so I can see how Robert can polish away .5 - .75 lbs away. The magic is how he shaves the sear to eliminate creep and likely adds material to adjust pre and over travel. Link to comment Share on other sites More sharing options...
Mick-S Posted August 6, 2020 Share Posted August 6, 2020 9 hours ago, Stician said: My Legion will arrive at TSA today and I’m looking forward to experiencing this. I sold both of my GG kits and while they were a nice upgrade I prefer the wider flat shape of the factory trigger.... without the GG trigger I also have overtravel. The factory trigger is about 4 lbs so I can see how Robert can polish away .5 - .75 lbs away. The magic is how he shaves the sear to eliminate creep and likely adds material to adjust pre and over travel. Let me know how you like it. I love mine. Link to comment Share on other sites More sharing options...
JatCarver Posted September 19, 2020 Share Posted September 19, 2020 I would love to hear if anyone has experience modifying the sear/striker hook interface and how it changed the feel of the break. I’m planing to play with this over the off season and would be nice to have some knowledge going in. Link to comment Share on other sites More sharing options...
DAWCRW Posted September 13, 2021 Share Posted September 13, 2021 Has anyone tried to use the comp springs on the stock legion parts? I would like a lighter trigger and a little smother move at the wall. Link to comment Share on other sites More sharing options...
RH45 Posted February 11, 2022 Share Posted February 11, 2022 I dropped Gray Guns trigger kits in both of my Xfives. Defiantly have what I consider a LOT of creep in both. I’ve dropped Apex kits in a bunch of M&Ps, and they are MUCH better trigger pulls! If I could get rid of the creep on my Xfives, I’d be happy. Link to comment Share on other sites More sharing options...
Cuz Posted June 20 Share Posted June 20 Which aftermarket drop-in trigger offers the shortest reset? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now