chevrofreak Posted December 7, 2018 Share Posted December 7, 2018 On 12/5/2018 at 8:56 PM, highhope said: As I know, Tevo Sports is the only company making mounts for it ..... Tiger is an amazing person to deal with. Link to comment Share on other sites More sharing options...
CHARLES D Posted December 9, 2018 Share Posted December 9, 2018 I shot with Tiger this year at Area 2. Real nice guy. Wasn't shy about letting you handle his gun in the safe area. His mount is solid Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 9, 2018 Share Posted December 9, 2018 Hello: I guess I will have to order one up from Tevo and give it a try. It will get a full testing here so we will see how it works out. Thanks, Eric Link to comment Share on other sites More sharing options...
Lastcat Posted December 9, 2018 Share Posted December 9, 2018 On 12/5/2018 at 8:39 AM, highhope said: I am using 4 -60 screws, and one-side mount. will see how that mount hold. BTW, 510c is lighter than cmore slideride, many shooters use one side mount for cmore, right? I did use the Top mounted for my Cmore at first. Then switched over to the 90 degree mount. I always see these 501C's advertised with the DoveTail mount. So you can remove the Dove Tail and somewhere from the top, are holes for the 4-60 screws? I saw a GM using one at a match, but never knew how he mounted it to the top mount he was using. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 9, 2018 Share Posted December 9, 2018 Hello: there are 4 mounting screws for the Holosun 510C dovetail base. Remove the screws and the base comes off. You can also remove the metal shield cover if you want it lighter although it is very light and adds protection. I have everything ordered and will see how it does. I went with the single sided mount since that is what I am using right now on one of my open pistols. I really like the Holosun 510C on my PCC's so it should be good on my open pistol. Thanks, Eric Link to comment Share on other sites More sharing options...
Lastcat Posted December 9, 2018 Share Posted December 9, 2018 1 hour ago, Aircooled6racer said: Hello: there are 4 mounting screws for the Holosun 510C dovetail base. Remove the screws and the base comes off. You can also remove the metal shield cover if you want it lighter although it is very light and adds protection. I have everything ordered and will see how it does. I went with the single sided mount since that is what I am using right now on one of my open pistols. I really like the Holosun 510C on my PCC's so it should be good on my open pistol. Thanks, Eric Thanks Eric. What's the difference between single sided mount? Is there a double sided or 90 degree mount type? Is single sided mount where the 510C is straight up over the top of the slide? Or 90 degrees to the slide? Thanks. Link to comment Share on other sites More sharing options...
kujo929 Posted December 9, 2018 Share Posted December 9, 2018 Thanks Eric. What's the difference between single sided mount? Is there a double sided or 90 degree mount type? Is single sided mount where the 510C is straight up over the top of the slide? Or 90 degrees to the slide? Thanks.Single sided mountSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Lastcat Posted December 9, 2018 Share Posted December 9, 2018 2 hours ago, kujo929 said: Single sided mount Sent from my iPhone using Tapatalk Sweet! Thanks Kujo. Really like what you going on there, dust cover looks fine too, bet it's a keeper. Link to comment Share on other sites More sharing options...
kujo929 Posted December 9, 2018 Share Posted December 9, 2018 Sweet! Thanks Kujo. Really like what you going on there, dust cover looks fine too, bet it's a keeper. Unfortunately that ones not mine. That is photo I was sent when I asked the mount manufacturer if it would work on an Atlas. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
sean_stw Posted December 9, 2018 Share Posted December 9, 2018 I tried to get as good of a picture as i could of the brightness and sizes of the 510c vs DPP. The DPP is just a little bit brighter but not a ton but since it is brighter it gives a little bit more of a starburst look in the picture. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 11, 2018 Share Posted December 11, 2018 Hello: Well half of my setup arrived today. I took the mount and hood off the Holosun 510C and will weight it to see how it compares to a C-More slide ride. Just in my hands it feels heavier than a plastic C-More but pretty close to a metal C-More. I love the really clear small dot and the large glass on the Holosun. I will see how it works out very soon but expect it to be as nice as the ones on my PCC's and 15/22. Thanks, Eric Link to comment Share on other sites More sharing options...
echotango Posted December 11, 2018 Share Posted December 11, 2018 (edited) I have them on my pcc and 15/22 but just can't make the jump from RTS2's on my open guns. Edited December 11, 2018 by echotango Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 11, 2018 Share Posted December 11, 2018 Hello: I never made the jump to the RTS2 since so many around here have had problems with them. They were just not holding up very well and some that changed over that I saw did not shoot them as well. Some went back to the original C-More and some went a different route. I guess I will be the test mule around here on an open pistol. Looking forward to the testing and will see how my match results are. Thanks, Eric Link to comment Share on other sites More sharing options...
Hooked Posted December 12, 2018 Share Posted December 12, 2018 Anyone with a 3D printer making covers for the 510C? Link to comment Share on other sites More sharing options...
sean_stw Posted December 12, 2018 Share Posted December 12, 2018 I found a cover for the 510c its not a perfect fit but it does fit pretty good, its made by Scopecoat and is made for the eotech EXPS 2 or 3. This is the item number SCP12HE11BK i got it on amazon. Link to comment Share on other sites More sharing options...
rpm8300 Posted December 13, 2018 Share Posted December 13, 2018 I put a 510C on my MPX for PCC and immediately after shooting it thought - how good would it be if you could mount this on a pistol. If anyone has run it, can you share the offset at 3m with a 18 or 20m zero - I'm going to guess its at least 2" or so. Thanks, Tom Link to comment Share on other sites More sharing options...
Sarge Posted December 13, 2018 Share Posted December 13, 2018 I think they look too big and bulky on an open gun. I might try one on my carbine though Link to comment Share on other sites More sharing options...
Stealsack Posted December 14, 2018 Share Posted December 14, 2018 6 hours ago, Sarge said: I think they look too big and bulky on an open gun. I might try one on my carbine though Agreed! I did order one yesterday to test on my latest pcc. Currently shooting c-more for steel, and vipers for run and gun. We shall see Link to comment Share on other sites More sharing options...
B_Seehawer Posted December 14, 2018 Share Posted December 14, 2018 I think they look too big and bulky on an open gun. I might try one on my carbine thoughI absolutely agree they aren’t aesthetically pleasing, they may begin to look better if they prove to hold up. Link to comment Share on other sites More sharing options...
kujo929 Posted December 14, 2018 Share Posted December 14, 2018 Looks or not I’ll give it a shot to try a larger window...Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Gviz Posted December 14, 2018 Share Posted December 14, 2018 My bad eyes + big window + bright dot = longevity its a win win for me Link to comment Share on other sites More sharing options...
Steve RA Posted December 14, 2018 Share Posted December 14, 2018 Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ?? Link to comment Share on other sites More sharing options...
Steve RA Posted December 14, 2018 Share Posted December 14, 2018 Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ?? Link to comment Share on other sites More sharing options...
Steve RA Posted December 14, 2018 Share Posted December 14, 2018 Do the mount screws come down from the top, or up from the bottom when you remove the mount it comes with ?? Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 14, 2018 Share Posted December 14, 2018 Hello: The mounting screws are in the bottom to answer your question 3 times You use the same 4 screws to mount to the Tevo mount. Screws are Torx head. Thanks, Eric Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now