Jump to content
Brian Enos's Forums... Maku mozo!

kujo929

Classifieds
  • Content Count

    524
  • Joined

  • Last visited

About kujo929

  • Rank
    Calls Shots

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    Bloomington ILLINOIS
  • Real Name
    Rob Kosack

Recent Profile Visitors

1,610 profile views
  1. I shaved off the bump where thumb wraps around. Made it more comfortable.
  2. https://benstoegerproshop.com/tanfoglio-eaa-witness-gold-custom-xtreme-open-race-gun-9mm/ this is the gun I wanted when I was shooting them. But at the time it was not imported into the US. And now that it is the cost is well into 2011 territory.
  3. Depends on bullet profile. I was using coated blue Bullets and their 125gr TC bullet would take a longer OAL due to shape. After reaming I used 115’s a lot but ended up back with the 125’s in the end. Less smoke due to less required velocity. So reaming may not be required based up on your needs.
  4. I used limited tanfo’s converted to open division for a season or two. Patriot defense is the company in the US that will be your go to if you are here. They sell most things tanfo. I used 9mm major in mine. Even using a limited I had one of the barrels reamed (by patriot defense) to load longer. You are able to get a really good trigger in the Tanfo’s. mag extensions to create 170mm tanfo mags weren’t around when I was shooting them so I had to use mostly 140’s with a couple mbx 170’s that were pretty good but not 100%. But now you can slap some extensions on th
  5. Only issue is with short mags when using magwell. Long mags it doesn’t matter. Sent from my iPhone using Tapatalk
  6. Yes. All the same mags Sent from my iPhone using Tapatalk
  7. I would assume so. But I don’t remember what the change was on the micrometer seating die when switching between them. It wasn’t a large adjustment. It’s not something I pay much attention to when loading for pistols. Sent from my iPhone using Tapatalk
  8. 115 PD and a 115 RMR. Both at 1.165 Sent from my iPhone using Tapatalk
  9. Yes 115 RMR’s currently Used 115 PD’s and 124PD’s with same measurements before I ran out of them. Sent from my iPhone using Tapatalk
  10. On a random round I just pulled it measured 1.165 oal On part of case where bullet is inside of case measured .378 Crimp .376 Sent from my iPhone using Tapatalk
  11. I can’t twist the Bullets on any of mine. Even out to 1.170. Roll sized brass also. Was using lee undersize die. Recently switched to a Redding ultimate which is also an undersize die. Can you twist one prior to the crimp station after seating? I would check that first and see what your neck tension looks like prior to crimp. I expand with an expander die only and do not expand on the powder die. Sent from my iPhone using Tapatalk
  12. I used honchos all this season. Primarily shoot open. Switch to limited occasionally and a 9minor barrel for steel matches sometimes. Sent from my iPhone using Tapatalk
  13. Seeing how short you guys are going makes me think I should shorten a little. May try 1.155 and check accuracy again. Sent from my iPhone using Tapatalk
  14. About .002 under bullet in case dimensions. I use an undersize sizer so the case neck tension is doing the bulk of the holding of the bullet. Crimp probably isn’t doing a lot. I’m not saying anything I do is correct. Just what I am doing... Sent from my iPhone using Tapatalk
  15. I’ve been loading them at 1.165 Sent from my iPhone using Tapatalk
×
×
  • Create New...