Jump to content
Brian Enos's Forums... Maku mozo!
highhope

holosun 510C is huge

Recommended Posts

2 minutes ago, StandardError said:

For a carbine wouldn't the weight difference of the shroud be minimal?

I removed them as I don't see it as necessary and cleared up your field of view. I just thought they were annoying and not needed. 

Share this post


Link to post
Share on other sites

I went from CO with a Delta Point to Open with the 510c. It's a great dot but the window was just too big for me. Plus I wanted to get away from any obstruction over the ejection port. 

 

Other than that personal preference, I think the Tevo and Holosun is a great package. 

Share this post


Link to post
Share on other sites

saw a picture from SHOT of a Glock with Holosun 510c frame mounted

Share this post


Link to post
Share on other sites

I have two 510Cs on ARs. They’re probably the best AR red dot I’ve used or looked they. I had no idea it was removable from the mount. I will definitely be looking into swapping this onto my open gun.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I put one on the Chaos I just received. Don’t have enough rounds down range to make judgement yet but like it so far.

fd49bdc95ab09a5742504682c44d6fde.jpg


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
1 hour ago, kujo929 said:

I put one on the Chaos I just received. Don’t have enough rounds down range to make judgement yet but like it so far.

fd49bdc95ab09a5742504682c44d6fde.jpg


Sent from my iPhone using Tapatalk

What mount are you using.?? 

Share this post


Link to post
Share on other sites
What mount are you using.?? 


Tevo single side for wide frame


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I mounted a 510C on my carbine... I love it... large viewing area... lots of brightness settings ..  can change from dot to circle or both... and don't have to turn off the dot all day.. according to Holosun the battery will last 5,000 hours... plus a solar back up if the battery dies...

Share this post


Link to post
Share on other sites
On 1/25/2019 at 10:38 PM, kujo929 said:

I put one on the Chaos I just received. Don’t have enough rounds down range to make judgement yet but like it so far.

fd49bdc95ab09a5742504682c44d6fde.jpg


Sent from my iPhone using Tapatalk

Very Nice man..

Share this post


Link to post
Share on other sites
On 1/23/2019 at 5:14 PM, Posvar said:

^^^^Did you go back to the DPP? 

 

Yes. It's been solid for me that I have them on my open and CO guns.

 

 

50233410_10216860065030521_7810125885763223552_o.jpg

Share this post


Link to post
Share on other sites

How has everyone's luck been with the 510c running on a 9mm major guns? Worried about ejection issues since it's pretty long.

Share this post


Link to post
Share on other sites

I recently put one on my Chaos using the mount from Atlas.  No ejection issues at all.  Sight itself is pretty awesome.  The only draw back is it gets blasted pretty good by the holes in my barrel.  Have to make sure I wipe the lens off after every stage.  I'm thinking about adding the Tevo blast shield to it.  I assume it would work with the atlas mount.  

Share this post


Link to post
Share on other sites
I recently put one on my Chaos using the mount from Atlas.  No ejection issues at all.  Sight itself is pretty awesome.  The only draw back is it gets blasted pretty good by the holes in my barrel.  Have to make sure I wipe the lens off after every stage.  I'm thinking about adding the Tevo blast shield to it.  I assume it would work with the atlas mount.  



I have opposite. I have one on my Chaos also but purchased before atlas made a mount. So I have the tevo mount. No blast on glass at all. However I do have some marks on back of optic body indicating some impacts. Ejected fine though


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Hmmm... I wonder if the Atlas puts the sight further forward than the Tevo.  Seems that would cause my problem and fix yours.  

Share this post


Link to post
Share on other sites

Interesting indeed! The Atlas mount does sit further forward from what I have heard, which also makes me wonder if the blast shield will affect the popple hole's gas dispersion.

 

Kujo - you're running 9mm major? Mixed brass?

Share this post


Link to post
Share on other sites
Interesting indeed! The Atlas mount does sit further forward from what I have heard, which also makes me wonder if the blast shield will affect the popple hole's gas dispersion.
 
Kujo - you're running 9mm major? Mixed brass?


Yes 9mm major. And embarrassingly awful range brass. This batch probably should have been scrapped. But it still ejects. 7b5e7ac855bc90d4f542c72b1915f340.jpg

Rear of optic body


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

The limcat mount is by far the best out there. Absolutely zero residue on the lens after hundreds of rounds the past few days. I go with and stand behind quality products and this is one of them.

IMG_7645.jpg

Share this post


Link to post
Share on other sites
5 minutes ago, lacivilian said:

The limcat mount is by far the best out there. Absolutely zero residue on the lens after hundreds of rounds the past few days. I go with and stand behind quality products and this is one of them.

IMG_7645.jpg

Can you post a pic of the other side?  Thanks

 

Share this post


Link to post
Share on other sites

Are they also commercially available? I've heard whisperings about them but have not seen them for sale anywhere.

Share this post


Link to post
Share on other sites

Just call Limcat. They will sell you one 

Share this post


Link to post
Share on other sites
On 1/27/2019 at 7:21 PM, praetorian97 said:

 

Yes. It's been solid for me that I have them on my open and CO guns.

 

 

50233410_10216860065030521_7810125885763223552_o.jpg

Still solid? lol

Share this post


Link to post
Share on other sites
22 hours ago, hitman_usmc said:

I recently put one on my Chaos using the mount from Atlas.  No ejection issues at all.  Sight itself is pretty awesome.  The only draw back is it gets blasted pretty good by the holes in my barrel.  Have to make sure I wipe the lens off after every stage.  I'm thinking about adding the Tevo blast shield to it.  I assume it would work with the atlas mount.  

I’m 99% sure about switching over to the 510C.   Just gotta choose which mount to get.  

 

I just looked at the Atlas website, and their Holosun mount includes a blast shield.  

 

Does your Atlas mount not have the blast shield or is the blast shield ineffective?

Share this post


Link to post
Share on other sites

Where are you finding the photo of the Atlas mount? From everything I've seen they don't have a blast shield as part of theirs for the 510c but they have a blast shield for all their micro dot mounts (my DPP mount included). 

 

The Atlas mount is a little closer to the popple holes to reduce ejection issues, but that means the optic gets blasted even more. I'm wondering how the gas dispersion would be affected if you use the Tevo blast shield on the Atlas mount.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...