George16

Very nice! What type of turbine engine are you using on your bike?

Ain’t that the truth ?

It’s a great feature of my shadow 2 and TSO until I installed the slide stop pin on my TSO.

I also use a buffer with a 10# recoil spring.

Yes it does.

I cleaned mine using 90% isopropyl alcohol I bought from Walmart.

There you go. More and more people are clamoring for your holsters. They really look gorgeous. I want one for my shadow 2 and TSO.

You can use the slide stop for the CZ PO1 on the Shadow 2.

You could have emailed or called LOK and have him custom make you one in the thickness you wanted. That’s what I did on mine. The thickness I wanted was between the palm swell and thin and they were perfect for my hands.

Confirmed with CZ-USA that the three recoil springs are 11 lb, 13 lb and 16 lb. The 16 lb spring is tapered at one end and the gun ships with this spring. The other two springs are 11 lb and 13 lb. HOWEVER, the longer spring is the 11 lb. The 11 and 13 have the same number of coils but the 11 lb spring is longer. TSO recoil springs Spares- 11 & 13 # Installed - 16#

Great shooting! I wish I can move as quick as you ?.

I’ve used Dry graphite lubricant on mine. It doesn’t attract dust or dirt at all.

Nice gun and holster. You want to make one for my TSO also? Holster is beautiful.

I use a Lee Taper crimp die. So far, no problems.

Heres my TSO with a CZC multi optic mount and a 6MOA vortex viper which helps since my vision is going from bad to worse. and swaping optics with the new czechmate to check if the Czechmate mount fits on the TSO without any interference with the slide top and there’s none.

You’re welcome.

Check out Quantico Tactical.

Yes, it’s a take it out/ put it in process to ensure proper figment and operation. Just go with the RHK race hammer kit. It’s a lot easier to install and more forgiving compared to just using the 10035 hammer. The kit comes with the competition hammer and adjustable sear. The adjustable sear has a set screw on it for adjustment. Once you get it adjusted properly, make sure you put a dab of the red loctite that comes with the kit. If you run into any problems, just give CGW a call and they’ll help you out. They have a great customer service.

Get the 10035 competition hammer. This hammer requires the OEM sear to be fitted to the safety leg in order for it to work properly. If you decide to go with, remove material little by little and test fit every time you remove some. Or you can get the RHK race hammer kit from CGW which is a drop in option for your gun.

1076 1071 1067 1076 1064 1070 1076 1064 1070 12 4 Using 124 Gr RN Blue bullets, WSPP, with 4.1 Gr Win231, OAL @ 1.084-1.088”. Ave: 1070 FPS HI: 1076 fps LO: 1064 fps ES.: 12 SD: 4 i load short because I use the same load on my shadow 2 and TSO.

You can get rid of it by installing a competition hammer from either CZC or CGW.

That EGW slide racker is almost identical to the shooters connection racker except for the setscrew location. The shooters connection is $24.99 compared to $39.99 from EGW.

Keep brake cleaner off of your optic. Get some Saran plastic wrap and wrap it to prevent the brake cleaner from coming into contact with it.

Wow! Very nice looking pistols.

Get the full size spring for your Czech mate.