TheGoatMumbler Posted February 27, 2020 Share Posted February 27, 2020 Trying to make a decision btw the two. Any thoughts? Belts too. Link to comment Share on other sites More sharing options...
J_Allen Posted February 27, 2020 Share Posted February 27, 2020 I have used both. The Speed Beez may be imperceptibly better for stand and shoot since all the moons are teed up at the top of the magnets. But in reality the North Mountain is just as good. As soon as you add movement, the North Mountain blows it out of the water. I had moonclips falling off the Speed Beez magnets with hard running. No problem at all with the North Mountain posts. Link to comment Share on other sites More sharing options...
GrumpyOne Posted February 27, 2020 Share Posted February 27, 2020 No experience with either of those, nor these...but they are...interesting. http://www.moonclipserver.com Link to comment Share on other sites More sharing options...
Mcfoto Posted February 27, 2020 Share Posted February 27, 2020 http://www.speed-e-rack.com this is the one I use. Never had a moon fall (knock on wood). Link to comment Share on other sites More sharing options...
revoman Posted February 27, 2020 Share Posted February 27, 2020 Moon clip server with 2 single post North Mountain. Link to comment Share on other sites More sharing options...
MRBerg Posted February 27, 2020 Share Posted February 27, 2020 I went with a north mountain it was highly recommended to me by a guy that I have great respect for that shoots revolver but don't tell Mike that lol Link to comment Share on other sites More sharing options...
ysrracer Posted February 27, 2020 Share Posted February 27, 2020 Revolver Supply Company dual post? Link to comment Share on other sites More sharing options...
MikeBurgess Posted February 27, 2020 Share Posted February 27, 2020 6in one half a dozen in the other, guys running both kinds finished in the top 5 at Nationals. Link to comment Share on other sites More sharing options...
AzShooter Posted February 28, 2020 Share Posted February 28, 2020 Quote I ran the North Mountain Speed Loader Holder for years and never lost a moon. I found it to be very fast while having all my moons in relatively the same space when going to a reload. Although I never ran the Steady Rack many of our local shooter had given it a try and all were satisfied. I'd go with the North Mountain if I ever started shooting Revolvers again. Link to comment Share on other sites More sharing options...
Carmoney Posted February 28, 2020 Share Posted February 28, 2020 7 hours ago, ysrracer said: Revolver Supply Company dual post? No. The design was shamelessly stolen from the original North Mountain product, without even so much as a word of attribution. ☹ Link to comment Share on other sites More sharing options...
FENWICK7 Posted February 28, 2020 Share Posted February 28, 2020 the northen mt. product is perfect for any shooting needs. Plus he''s a one per center when it comes to a great guy to rely on to do business. I fear he may be turning into a bass fisherman though.LOL. Link to comment Share on other sites More sharing options...
PatJones Posted February 28, 2020 Share Posted February 28, 2020 Moon clip server with 2 single post North Mountain. Same, but I got 2 of the taller posts to use for empty table starts. I replaced the center posts with longer ones with a pointier tip that allows me to quickly put on 2 stacked moons at the same time.Sent from my Pixel 2 using Tapatalk Link to comment Share on other sites More sharing options...
revoman Posted February 28, 2020 Share Posted February 28, 2020 I might have to try the taller posts Link to comment Share on other sites More sharing options...
Scootertheshooter Posted February 28, 2020 Share Posted February 28, 2020 Revo-Gear is another option and is a great setup . I have a couple for different setups . Dave’s an A+ guy to deal with too Link to comment Share on other sites More sharing options...
Revofan Posted February 28, 2020 Share Posted February 28, 2020 Agreed on the Revo gear set up he stands behind his products ! 10mmdave here on Enos Link to comment Share on other sites More sharing options...
pskys2 Posted February 29, 2020 Share Posted February 29, 2020 Go with North Mountain, it is more versatile and one can use several different caliber moon clips they have slightly different centers. I just don't trust magnets for run 'n gun matches. Link to comment Share on other sites More sharing options...
Ming the Merciless Posted February 29, 2020 Share Posted February 29, 2020 (edited) 12 hours ago, PatJones said: Same, but I got 2 of the taller posts to use for empty table starts. I replaced the center posts with longer ones with a pointier tip that allows me to quickly put on 2 stacked moons at the same time. Sent from my Pixel 2 using Tapatalk OUCHIES!! That looks like it would be painful to fall on! Edited February 29, 2020 by Ming the Merciless Link to comment Share on other sites More sharing options...
PatJones Posted February 29, 2020 Share Posted February 29, 2020 OUCHIES!! That looks like it would be painful to fall on! Nah. I could use to lose a few pounds, but my muffin top isn't _that_ big.Sent from my Pixel 2 using Tapatalk Link to comment Share on other sites More sharing options...
revoman Posted February 29, 2020 Share Posted February 29, 2020 17 hours ago, Ming the Merciless said: OUCHIES!! That looks like it would be painful to fall on! You shouldn’t be falling Link to comment Share on other sites More sharing options...
ysrracer Posted February 29, 2020 Share Posted February 29, 2020 Link to comment Share on other sites More sharing options...
Carmoney Posted March 1, 2020 Share Posted March 1, 2020 Am I the only one here who resents the outright thievery of Bob's design? Link to comment Share on other sites More sharing options...
alecmc Posted March 1, 2020 Share Posted March 1, 2020 (edited) Go with the OG. http://www.4wheelguns.com/ Edited March 1, 2020 by alecmc Link to comment Share on other sites More sharing options...
revoman Posted March 1, 2020 Share Posted March 1, 2020 1 hour ago, Carmoney said: Am I the only one here who resents the outright thievery of Bob's design? I am with you. Link to comment Share on other sites More sharing options...
ysrracer Posted March 1, 2020 Share Posted March 1, 2020 I have no idea what you guys are taking about. Link to comment Share on other sites More sharing options...
jhgtyre Posted March 2, 2020 Share Posted March 2, 2020 I'll shut the thread down if anyone continues to call anyone a thief. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now