IronicTwitch
-
Posts
561 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by IronicTwitch
-
Looks like the same non FPB mechanisms, hopefully some interchangeable parts with the current 75 series. Even better, the metal looks like it's a step above the soft cast steel and poly coat. Very interesting. Thanks for sharing!
-
Good find! It looks like it's got a following on FB...let alone with the crowd on Enos!
-
My thoughts on the design differences: - 9 vs 40 barrels have the same OD - 9mm barrel has more material and is slightly heavier - they took some material from the 9mm slide recoil spring tunnel to balance to the same weight for both models - recoil sleeve cycles quieter in dry fire racking (neat feature if you have a 9 slide) - no functional reason to have it (not needed of you're putting a 9 barrel on a 40 slide...pretty sure it won't even fit in the smaller diameter tunnel of the 40 slide)
-
Hello from Cedar Rapids! If you're looking for a place to shoot an indoor match, I suggest Eastern Iowa Practical Shooters at Midwest range the first Tuesday, first Saturday, or third Thursday. Send me a PM if you have questions. I'd recommend the 550 to anyone except the high volume shooters. I have a friend from work that is looking to sell his 650 of you are local and want to check it out in person.
-
Production Division Rules for CZ 75-SP-01 Decocker
IronicTwitch replied to GBertolet's topic in USPSA/IPSC Rules
Pretty sure CGW's reach reduction trigger includes a non factory pretravel screw which makes it a visible modification. Here's the language from CGW's site. "Is it legal for shooting sports? No. The pre-travel set screw installed on the upper area of the trigger is visible. However, you can use the modified RRK disconnector w/o the upper trigger screw to noticeable reduce the DA stroke." https://cajungunworks.com/product/rrk-t2-reach-reduction-kit/ -
Ok, I think I can handle that. I'm hoping I can remove the material from the frame, so I can still swap the slide back to my TS. Although I could just move the barrel back to my other TS slide (40). Very interesting! Always good to have another project to put together. Thanks!
-
Resurrecting this topic, I've got a spare 9mm TS slide and would like to put it on a small frame 75 series - is the 75 SA the best option? What kind of fitting would need to be done? Thanks in advance.
-
124gr Xtreme FP, 4.0gr WST, 1.07" OAL I think I've got about 8K of those through my TS now...works great!
-
+1 on this, each state may be different...not sure it's managed at the county/city level, but worthwhile to check around. There's always weird rules hiding out there...
-
Add another grateful shade tree smith who found this thread invaluable. This was the first sear cage I tore apart, and it was the P-01 just for fun. I used a LOT of CZC and CGW parts to make my own wanna be SDP (short of getting the rear sight milled). Great off season project! Thanks again all!
-
Thanks for that! There's a reason I didn't research too much before I went in...that would have convinced me to be celebate for the rest of my days instead!
-
24 hours later, you're spot on, beer good. For those that are wondering about the procedure and recovery, the only discomfort is lower abdomen (like you took a bump to the man plums) which persists for a couple days. Annoying, yes. But a good excuse to sit on the couch for a whole weekend. One thing I didn't realize is you still have live rounds in the, uh, magazine that take a couple months to cycle out. I know there's some pun about live fire or dry fire in that comment...
-
Vasectomy this afternoon - that should take care of the root cause!! Too much information, I know.
-
Lol! Seems like there's always someone leaving presents at my house this time of year...
-
Already the proud papa of three boys ages 6, 5, and 8 months...and now plus one more! Another pair that will be 16 months apart (no, definitely not planned). We'll see if my wife gets a girl finally. I keep telling myself the 8 month old needs a playmate beside the dog. Still trying to convince myself this is "What I Like"!
-
This should help, updated my TS by removing the checkering and have the frame hard chromed (matte) by Metaloy. Put it back together with the competition hammer, mostly for looks!
-
Great grip reduction, you wouldn't even have to get that repainted it's so cleanly done!
-
I spent $50 on the boss hangar to replace my DOH just to comply with the rules. Oh well. It makes sense for Limited and Open.
-
Excellent. I've bookmarked your page! I usually go thru the list of forum dealers when I look for stuff.
-
Your Preferred CONCEALED CARRY Belt & Holster Combo, and Why?
IronicTwitch replied to EchoMan's topic in Gear & Accessories
Duluth Trading Lifetime belt + Mitch Rosen OWB 5JR-Express line. IWB prefer hybrid holsters from White Hat Holsters. -
Maybe center of mass holsters has something you'd like? I know they've got the P01 mold.
-
CZ 75 TS (Tactical Sport) - Custom Triggers from CZ UB!
IronicTwitch replied to scottrallye's topic in CZ
Good info, thanks for sharing! -
I looked into doing that too. Unfortunately,the slide needs to be nuked to fit the different dovetail of the Heine or Novak style. CZC can get you a quote. Cheaper shipping since its just the slide. Not a lot of good options for aftermarket rear sights on standard CZ dovetails.
-
+1, especially for the 9mm version. If you can find the czechmate magwell there's a few easy grip options to customize.
-
I'm assuming you wouldn't send them your unicorn custom gun. But fitting a barrel is a relatively non invasive job that would be backed by deep corporate pockets if done incorrectly.
