mgood Posted March 3, 2010 Share Posted March 3, 2010 Smith & Wesson Sigma SW40F In the holster I use for Production (and used for Limited and Limited 10 last weekend ) Link to comment Share on other sites More sharing options...
nickatnite Posted March 10, 2010 Share Posted March 10, 2010 (edited) Here is mine. The G-34 is my Production gun and the G-19 is my IDPA gun... Edited March 10, 2010 by nickatnite Link to comment Share on other sites More sharing options...
-JQ- Posted March 10, 2010 Share Posted March 10, 2010 Just Cause..... Cause the gun is more memorable than my shooting mmm...yummy Look at all those mags you rock...bullets are in backward though Link to comment Share on other sites More sharing options...
splashdown Posted April 5, 2010 Share Posted April 5, 2010 Glock 35, Dawson sights, tungsten guide rod w/ 13 lb spring and some skateboard tape. Pretty basic, but I'm really happy with it. Link to comment Share on other sites More sharing options...
DonovanM Posted September 27, 2011 Share Posted September 27, 2011 (edited) This thread definitely needs some bumpage. Here's my SIG P226ST. At present it does not have the extended mag release, Hogue recheckered grips, and it has different sights (Ameriglo Defoor Tactical's now). It also now has alot more holster wear and a magwell that looks like a warzone. Edited September 27, 2011 by DonovanM Link to comment Share on other sites More sharing options...
Jimdoe Posted September 27, 2011 Share Posted September 27, 2011 Here's mine Tanfoglio Stock 2. Link to comment Share on other sites More sharing options...
glefos Posted September 27, 2011 Share Posted September 27, 2011 Here's mine Tanfoglio Stock 2. Details? Trigger work, add ons, etc? Very nice. Link to comment Share on other sites More sharing options...
Jimdoe Posted September 28, 2011 Share Posted September 28, 2011 Here's mine Tanfoglio Stock 2. Details? Trigger work, add ons, etc? Very nice. Trigger done by Jim Bodkin, smoothing and buffing, replacing some parts. I then added the rolling trigger plunger. All parts are available at HENNINGSHOOTSGUNS.COM. Gun shoots flat using 147gr. Huening Rolling Trigger Plunger (MODIFIED AND ROUND OFF EDGES) HENNING Firing Pin Henning Contour Grip Wolff Extra Power Extractor Spring Henning iFiber Fiber Optic Front Sight Wolff 13lb Reduced Power Hammer Spring Wolff 6lb Recoil Spring Link to comment Share on other sites More sharing options...
jros3e Posted September 29, 2011 Share Posted September 29, 2011 My SPHINX 3009 SOP pistol for Production. Normal frame. Link to comment Share on other sites More sharing options...
jros3e Posted September 29, 2011 Share Posted September 29, 2011 Another photos. Link to comment Share on other sites More sharing options...
spanky Posted September 29, 2011 Share Posted September 29, 2011 Link to comment Share on other sites More sharing options...
RIIID Posted September 29, 2011 Share Posted September 29, 2011 It was, now I'll have to a .40 the same way. Rich Link to comment Share on other sites More sharing options...
GLOCK PILOT Posted March 7, 2012 Share Posted March 7, 2012 Here's my Glock 34 Link to comment Share on other sites More sharing options...
RAZZ Posted March 10, 2012 Share Posted March 10, 2012 (edited) HK P30L Edited March 10, 2012 by RAZZ Link to comment Share on other sites More sharing options...
triplesinglestack Posted March 15, 2012 Share Posted March 15, 2012 (edited) the one on the left is a "Millenium" I believe, limited run from 2000 w/special SN starts w Y2K, and some nice factory grips, the other on is a plain jane 92fs, w/some trigger work and production legal mods Edited March 15, 2012 by triplesinglestack Link to comment Share on other sites More sharing options...
MarkR Posted April 1, 2012 Share Posted April 1, 2012 This is my current set up, I just started shooting USPSA. I own and carry a few 1911's, but enjoy shooting my Glock 19 quite a bit more, plus 9mm is just a little cheaper to feed my gun. I'm looking in to either a Glock 34, or an M&P 9 Pro with a threaded barrel, I'm about 60%/40% leaning towards the M&P though, just can't get over that sexy look, especially the tan frame guns. Link to comment Share on other sites More sharing options...
DonovanM Posted April 4, 2012 Share Posted April 4, 2012 Old hotness on left, new hotness on right Link to comment Share on other sites More sharing options...
Jeanjacket Posted April 4, 2012 Share Posted April 4, 2012 XDm9 4.5" w/ PRP Ultimate Match Trigger, PRP X-Treme Grips Traction Sand, PRP Extended Mag Release Thinking about doing the solid guide-rod "thing"... Don't know enough about it yet. Link to comment Share on other sites More sharing options...
joecichlid Posted April 27, 2012 Share Posted April 27, 2012 Now that I FINALLY have a Production gun I guess I need to get out the goodies and shoot me some photos of the blaster and soon. lol Joe W. Link to comment Share on other sites More sharing options...
Maks_H Posted April 27, 2012 Share Posted April 27, 2012 My baby! Link to comment Share on other sites More sharing options...
steel1212 Posted May 26, 2012 Share Posted May 26, 2012 Link to comment Share on other sites More sharing options...
Aircooled6racer Posted May 26, 2012 Share Posted May 26, 2012 Corey: Those are just cool Cz's never looked so good. Makes me want to buy one again. Thanks, Eric Link to comment Share on other sites More sharing options...
StephenG Posted May 26, 2012 Share Posted May 26, 2012 And yet another CZ... From Akai Custom Sent from my iPad using Tapatalk HD Link to comment Share on other sites More sharing options...
gunguru Posted July 20, 2012 Share Posted July 20, 2012 Here's mine... CZ SP-01 Shadow And the backup one... EAA/Tanfoglio Witness Classic. Link to comment Share on other sites More sharing options...
Sheperd80 Posted July 21, 2012 Share Posted July 21, 2012 Heres my production piece. Obviously the TLR3 comes off for matches. Bone stock except skateboard tape and removed the mag safety. 5.11 tactical TDU double-duty belt, fobus dual mag holder (soon to be replaced), 2 tactical kydex holders (2 more are on their way) bladetech holster. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now