Jump to content
Brian Enos's Forums... Maku mozo!

Maks_H

Classifieds
  • Content Count

    216
  • Joined

  • Last visited

Everything posted by Maks_H

  1. Good news!!! New Alu triggers are up! https://www.rexfirearms.com/product-page/rex-zero-1-sport-trigger
  2. It should work just fine. With extended firing pin it works with 15 or even 14lbs hammer springs. Couldn't get 13lbs to test yet, to see if it works with soft primers. But for such light springs also the hammer must be from Zero1, it is a little havier compared to Alpha hammer. Also I would love to see if Grey guns would get hands on the Alpha and worked their magic on it.
  3. Hi, sorry I was very busy with the new job. I will try to catch up. Haven't been much in contact with company either, I will se their guy on Friday and I will check the status of aftermarket parts.
  4. Because they were added to the shipping batch later and weren't planned at first. So according to original paperwork everything was ok. It happens...
  5. Hi guys, as Jeff said... But I haven't been much in touch with Arex lately since, I was away from home. Next weekend I will meet the guy from Arex and try to get some updates.
  6. Yes I know for a fact that shipping is 7 Euros which is approx. 10 US Dollars.
  7. You will be able to order directly from Slovenia for 10$ shipping fee.
  8. To light spring in Alpha or Zero1 will cause light strikes, but the good news is that tuned trigger will open the window for additional 2lbs on DA. Which means that whichever ammo is on the ignition limit with tuned trigger that limit will be 2lbs lower.
  9. Put some oil on magazine catch, can be a little stiff and not pressing it enough can cause magazine sticking. When it happens during shooting, check if the slide pushing upper round in the magazine forward it can hang on the barrel ramp then and magazine will not drop free.
  10. Yes it will. I will post here ASAP when they will be available in online shop.
  11. Sure. But most of the reset on Alpha you can shorten with pretravel screw just the last bit where the pretravel screw won't work you can modify trigger bar. Hopefully alu triggers with pretravel screws will go out for sale next week.
  12. Sorry my bad, read your post wrong got confused since I have a little different system in Alpha since it is preseries. I don't have FPB inside. You were spot on for Rex Zero 1. For Alpha is little different, since trigger bar directy engages sear not through FPB.
  13. The easiest way to shorten reset is to modify trigger bar by removing some material where has a contact with sear. I will post photo later.
  14. No trigger yet... They were closed for two weeks because vacation. Tomorrow I will have more info about trigger and firing pin release.
  15. Excellent, I hope agressive aftermarket grips will be available soon. A company that produces parts already has 3D models for Alpha. It takes a little more time since grips are wraped and more difficult to make.
  16. That is short and I like the flatter surface. Where do I get it? At www.rexfirearms.com It should be available by the end of the week.
  17. Alum trigger is less curved and maybe little harder to reach in DA, but has a realy nice flat surfface which gives you feel in SA as you are shooting SA gun only. On avarage match 8-10 DA versus 200-250 SA pulls to me is totaly worth it. Also it has an overtravell screw so reset is short, very short. Grips are the same thickness as plastic but those are first batch so to me are not agressive enough, I am waiting for more agressive option. https://youtu.be/JUknOYAOKxM
  18. Already talked to factory about parts for DA. They will start producing after the mid August. I desagree on fit and finish ? Alpha is all nithride (Trnnifer) vs. powder coating on S2.
  19. Zero 1 hammer is legal also under IPSC rules since it is a factory hammer and can be ordered for Alpha also. And we all know that IPSC rules for PD are way more strict.
×
×
  • Create New...