Open1215 Posted December 4, 2015 Share Posted December 4, 2015 My growing collectionWho squared your trigger guard? Link to comment Share on other sites More sharing options...
Open1215 Posted December 4, 2015 Share Posted December 4, 2015 Did Rich do all of them? Link to comment Share on other sites More sharing options...
waterboy Posted December 4, 2015 Share Posted December 4, 2015 Yes Rich has done all of them for me. Link to comment Share on other sites More sharing options...
Open1215 Posted December 4, 2015 Share Posted December 4, 2015 Man I love his work! Link to comment Share on other sites More sharing options...
want2race Posted December 4, 2015 Share Posted December 4, 2015 It is a Bianchi Metallic division (NRA Action Pistol) gun that takes advantage of all the rules. I built it on a Fosters frame, Caspian slide with an STI TruBor blank 9mm barrel. I wanted to run a 6.25" barrel with an 8.5" sight radius, yet have a lighter 5" slide. The front sight is from Clarks, sitting in a European style dovetail (along bore, not sideways). The sight sits on the end of the TruBor blank, so it is similar to a sight tracker and gives the extended sight radius without the weight of using a 6" slide. Plus, it is a true 6.20" length barrel which I felt was better than putting a fake comp on a 5" or 6" barrel. Additionally, the heavy (HEAVY) barrel reduces slide velocity. Initially, the slide wouldn't even open after firing a +P round. Barely opened after lightening the slide. Then I started taking weight off the barrel blank until the slide "just" functioned and locked open on empty. Very soft shooting, without being sluggish or slow. The rear sight (Shifty Sight) is my own design that shifts Right and Left for the mover event. It returns to center so there is no need to rezero after shooting the mover. The lead length is adjustable for different bullet weights/speeds and barrel lengths. Once set, the sight unlocks, shifts to the stop (right or left), then locks in place. It works great and it probably the best thing I've designed so far, mainly because it is so simple. I can't believe it hadn't been done before. I tested this at Bianchi. After I shot the mover event I went to the practice range to confirm zero at 50m. Put them all in the X ring! I had tested it before the match, but I wanted to recheck it. The grips I made from Honduran Rosewood (shut it Wayne). The Prone pad is from Warren, raises the gun up for prone shooting. The trigger is an X-line trigger, I have another post on that elsewhere on this forum. The rules specify a minimum 2 pound trigger pull. I set up the X-line as a two stage trigger, 1 pound initial and 1.03 additional pounds for the second stage. Very, very easy to shoot groups with this set up. This trigger makes the 50 meter line a snap. Sent it to Black Dove for the insane Cerakote job. I specified the colors (something go with the grips) and he knocked it out! Link to comment Share on other sites More sharing options...
MrRick Posted December 6, 2015 Share Posted December 6, 2015 My first IPCS gun. My old L10 gun. Miss it. Link to comment Share on other sites More sharing options...
troupe Posted December 6, 2015 Share Posted December 6, 2015 Rich does some great work. He is not afraid to make metal fly. Link to comment Share on other sites More sharing options...
derekmelton Posted March 2, 2016 Share Posted March 2, 2016 Link to comment Share on other sites More sharing options...
terrydoc Posted March 12, 2016 Share Posted March 12, 2016 (edited) My new to me 9mm Springfield RO I picked up this morning, couple of changes to it, Techwell SP and Dualtech grips and an ED Brown ext mag release and Wilson Combat checkered front strap.. Soon to drop out the ILS and mainspring housing and fit a Dawson IPSC magwell. At the moment it's a back up to my 9mm Nighthawk but once it's set up will be my minor Classic gun. Edited March 12, 2016 by terrydoc Link to comment Share on other sites More sharing options...
demon969 Posted March 22, 2016 Share Posted March 22, 2016 will be shooting classic minor in ipsc with this gun after the gun ban. Link to comment Share on other sites More sharing options...
bonglee0507 Posted March 24, 2016 Share Posted March 24, 2016 Is the protruding barrel ipsc legal? Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
euxx Posted March 24, 2016 Share Posted March 24, 2016 Is the protruding barrel ipsc legal? Nope Link to comment Share on other sites More sharing options...
demon969 Posted March 24, 2016 Share Posted March 24, 2016 many shooters are using that kind of set up in their classic guns (at least where i'm from), it fits the ipsc box. if it's not allowed then its just an easy fix anyway . Link to comment Share on other sites More sharing options...
euxx Posted March 24, 2016 Share Posted March 24, 2016 many shooters are using that kind of set up in their classic guns (at least where i'm from), it fits the ipsc box. if it's not allowed then its just an easy fix anyway . Check this from the mouth of the IPSC Rules director. http://ipsc.invisionzone.com/index.php?showtopic=19654 Link to comment Share on other sites More sharing options...
bonglee0507 Posted March 24, 2016 Share Posted March 24, 2016 many shooters are using that kind of set up in their classic guns (at least where i'm from), it fits the ipsc box. if it's not allowed then its just an easy fix anyway . Check this from the mouth of the IPSC Rules director. http://ipsc.invisionzone.com/index.php?showtopic=19654 Thanks for the link. Found this in that forum Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
euxx Posted March 24, 2016 Share Posted March 24, 2016 Thanks for the link. Found this in that forum I couldn't find that picture Do you have a link to the original post? Link to comment Share on other sites More sharing options...
demon969 Posted March 25, 2016 Share Posted March 25, 2016 back to the gunsmith then . thanks euxx & bonglie. Link to comment Share on other sites More sharing options...
ltdmstr Posted April 2, 2016 Share Posted April 2, 2016 Latest. Link to comment Share on other sites More sharing options...
perttime Posted April 4, 2016 Share Posted April 4, 2016 Link to comment Share on other sites More sharing options...
JerryShoots Posted April 6, 2016 Share Posted April 6, 2016 Cool!! I used to have one of these. Not nearly as nice as yours though. Link to comment Share on other sites More sharing options...
obsessiveshooter Posted April 12, 2016 Share Posted April 12, 2016 (edited) Here's my taurus 9mm. I put $13 grips from ebay, a Wilson low safety, and an s&a magwell.I deleted the series 80 parts, clipped a coil from mag release spring and mainspring, installed a 10lb recoil spring, cut the factory front sight into a fiber optic sight, and polished the trigger and moving parts. I left alone the sear and disconnect- I don't have tools for that. I have about 1200 rounds through her and the only malfunction was an FTE before I got the proper recoil spring. I estimate she has a 3lb trigger. Very good slide to frame fit. Runs with factory mags, but I bought metalform mags to get 10 rounds.I estimate I have $700 in this, not including magazines. I bought this just to learn about 1911s. I'm a glock shooter in Limited and this gun taught me I don't like the ergonomics of the 1911 platform. Blasphemy, I know! I posted this because people snicker at the idea of a Taurus pistol being a workable option. I'm having no problems with this. Edited April 12, 2016 by obsessiveshooter Link to comment Share on other sites More sharing options...
Open1215 Posted April 12, 2016 Share Posted April 12, 2016 Looks nice! Sent from my LGLS991 using Tapatalk Link to comment Share on other sites More sharing options...
EDA Posted April 17, 2016 Share Posted April 17, 2016 Picked up a customized Norinco 1911 - going to see how accurate it is and try it for 3-gun Heavy Metal. All internals were swapped out to Ed Brown, 10-8, C&S. Kart barrel. Slide and frame markings other than s/n were machined off and it was re-cerakoted. Link to comment Share on other sites More sharing options...
works for ammo Posted June 18, 2016 Share Posted June 18, 2016 Here is my Range Officer 9mm for single stack. Using Dawson 10rd CRP mags. Link to comment Share on other sites More sharing options...
ltdmstr Posted June 19, 2016 Share Posted June 19, 2016 Caspian .45. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now