rooster Posted October 3, 2020 Share Posted October 3, 2020 I just got a gen5, 34 mos. I think the issue is the new trigger set up. I tried about every combination of connectors, recoil, and striker springs, and could not get below 3 lbs. either the slide would not go fully into battery, or trigger would not reset. It would take me too long of a post to go through everything that I tried. So this is what worked for me. A 15lb recoil spring, and a 5lb striker spring. With that set up everything works as it should. Link to comment Share on other sites More sharing options...
Flea Posted October 4, 2020 Author Share Posted October 4, 2020 20 hours ago, Trevarm said: Just got a Johnny Glock trigger. Not sure what everyone is raving about. Very short take-up and overtravel, but the trigger is heavier than stock. This was after i sent the trigger back the first time because the trigger would not break. I contacted Johnny Glock and he said that the trigger not breaking sometimes happens with Gen 5 glocks. I guess I will keep contacting him. I get it won't ever be super crisp, single action trigger, but i was expecting an improvement over a stock trigger. I have another Glock 34 with a Vogel trigger in it. The Vogel trigger is leaps and bounds better. What do you like about the Vogel trigger? Link to comment Share on other sites More sharing options...
Trevarm Posted October 4, 2020 Share Posted October 4, 2020 (edited) 1 hour ago, Flea said: What do you like about the Vogel trigger? Lighter than stock, defined wall, very little over travel. Its nothing crazy compared to stock, but it was an improvement. My main complaint about the Johnny Glock trigger is that it really isn't anything better than a stock trigger. There is less take up and less over travel, but it is heavy. Edited October 4, 2020 by Trevarm Link to comment Share on other sites More sharing options...
Edwards30 Posted October 4, 2020 Share Posted October 4, 2020 23 hours ago, Trevarm said: Just got a Johnny Glock trigger. Not sure what everyone is raving about. Very short take-up and overtravel, but the trigger is heavier than stock. This was after i sent the trigger back the first time because the trigger would not break. I contacted Johnny Glock and he said that the trigger not breaking sometimes happens with Gen 5 glocks. I guess I will keep contacting him. I get it won't ever be super crisp, single action trigger, but i was expecting an improvement over a stock trigger. I have another Glock 34 with a Vogel trigger in it. The Vogel trigger is leaps and bounds better. What trigger pull weight are you getting when measuring on the Johnny Glock? I don't recall what connectors he uses in each kit but I know my finger perceives a big difference between a minus and a dot connector but my trigger pull gauge didn't show a big difference. Link to comment Share on other sites More sharing options...
RangerTrace Posted October 4, 2020 Share Posted October 4, 2020 10 hours ago, Trevarm said: Lighter than stock, defined wall, very little over travel. Its nothing crazy compared to stock, but it was an improvement. My main complaint about the Johnny Glock trigger is that it really isn't anything better than a stock trigger. There is less take up and less over travel, but it is heavy. You must have the stock striker spring in the pistol. I've got two of his complete triggers in two G45s. I've got the combat trigger in my work gun. Super short, pre travel, over travel and reset. Still pretty heavy. Probably my favorite Glock trigger. I have his full blown competition trigger in my CO G45. It's short like the combat trigger, but much lighter and kinda mushy, even with a 4.5# striker spring. Link to comment Share on other sites More sharing options...
Trevarm Posted October 10, 2020 Share Posted October 10, 2020 I am using the 4.5 spring. I just checked the weight in a Lyman trigger pull gauge. Johnny Glock competition trigger with 4.5 spring= 5 pound pull. I am pretty disappointed to say the least. Link to comment Share on other sites More sharing options...
usmc1094 Posted October 10, 2020 Share Posted October 10, 2020 11 hours ago, Trevarm said: I am using the 4.5 spring. I just checked the weight in a Lyman trigger pull gauge. Johnny Glock competition trigger with 4.5 spring= 5 pound pull. I am pretty disappointed to say the least. If give him a call, that doesn't sound right at all. Did you prep the frame, maybe its hanging up on something. Link to comment Share on other sites More sharing options...
JBP55 Posted October 10, 2020 Share Posted October 10, 2020 14 hours ago, Trevarm said: I am using the 4.5 spring. I just checked the weight in a Lyman trigger pull gauge. Johnny Glock competition trigger with 4.5 spring= 5 pound pull. I am pretty disappointed to say the least. The JG competition trigger in my G45 is about 2 pounds lighter than yours. You need to sell me that awful trigger at a big discount. Link to comment Share on other sites More sharing options...
Trevarm Posted October 10, 2020 Share Posted October 10, 2020 6 hours ago, usmc1094 said: If give him a call, that doesn't sound right at all. Did you prep the frame, maybe its hanging up on something. I emailed him. He sad he was going to get back to me with some ideas. No prep, just a brand new stock glock 34. Link to comment Share on other sites More sharing options...
usmc1094 Posted October 11, 2020 Share Posted October 11, 2020 8 hours ago, Trevarm said: I emailed him. He sad he was going to get back to me with some ideas. No prep, just a brand new stock glock 34. He has a video on YouTube showing how to get the frame ready for his trigger. He's a good guy, and he will make sure you're happy! Link to comment Share on other sites More sharing options...
Tnbb33 Posted October 12, 2020 Share Posted October 12, 2020 My preference is just polish parts, lighter connector, and lighten the striker spring slightly, you are not going to get a da/sa quality trigger. As mentioned before all guns are different and some parts work better in one gun and not well in another, if you want to swap parts get several different kinds. Trigger weight matters less, practice and dry fire matters more. Link to comment Share on other sites More sharing options...
Cuz Posted October 12, 2020 Share Posted October 12, 2020 I started installing a trigger housing with over travel stop in my competition Glocks and I like them. It seems after many, many years of buying everyone’s trigger kit under the sun you just can’t beat a Wolff competition spring pack ($9) and a Glock trigger housing with over travel stop (approx $15). But, since I can’t leave well enough alone, and I happen to be a fan, I also add an Apex trigger with Gen3 trigger bar to the mix. This is for my Gen3 and gen4 Glocks. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
yigal Posted October 12, 2020 Share Posted October 12, 2020 On 8/7/2020 at 5:10 PM, B_RAD said: I feel we need a mandatory Glock starter thread. “You want to shoot a Glock? Read this!” Glocks will never have as good as a trigger as a SA gun. I just saved you a crap ton of time. Now go practice. wish I would have seen that (and believed it) when I first started. I’d be a decent shooter by now! You're right. Save money and buy a real gun and not some plastic toy Link to comment Share on other sites More sharing options...
MemphisMechanic Posted October 12, 2020 Share Posted October 12, 2020 35 minutes ago, yigal said: You're right. Save money and buy a real gun and not some plastic toy You’re saying that to a guy who wins matches with a damn Canik. Link to comment Share on other sites More sharing options...
yigal Posted October 12, 2020 Share Posted October 12, 2020 (edited) 35 minutes ago, MemphisMechanic said: You’re saying that to a guy who wins matches with a damn Canik. it's not the arrow that wins. Edited October 12, 2020 by yigal Link to comment Share on other sites More sharing options...
Trevarm Posted October 15, 2020 Share Posted October 15, 2020 (edited) Well, so far no luck. I had not heard back from Johnny Glock, so I called him. No answer, but he texted me and said that if my trigger isn't working its a problem with my gun. My gun is a brand new gen 5 glock 34. The only after market part of the gun is his trigger. He says he will call me later today.... UPDATE: he never called. Definitely not the product or experience I have read about with Johnny Glock on here. Looking at Glock talk it appears I am not the only one to have issues. Edited October 16, 2020 by Trevarm Link to comment Share on other sites More sharing options...
FreaknAZ Posted October 16, 2020 Share Posted October 16, 2020 On 8/25/2020 at 11:33 AM, Sethdaniel05 said: Also having a loaded mag in a Glock changes the trigger feel a little. You need upward pressure on the slide to check engagement and to give you real world feel. Sent from my iPhone using Tapatalk For years I've read posts on countless threads and that's the first time I've seen that mentioned. A trigger can feel alot different with a full magazine. I've also watched people looking to buy, dry fire polymer pistols of all types in gun shops without a magazine to get an idea what the trigger is going to be like. If I'm going to buy a pistol I'll take a magazine full of snap caps and ask to load up a mag first. Link to comment Share on other sites More sharing options...
OptimiStick Posted October 16, 2020 Share Posted October 16, 2020 On 10/3/2020 at 9:05 PM, Trevarm said: Lighter than stock, defined wall, very little over travel. Its nothing crazy compared to stock, but it was an improvement. My main complaint about the Johnny Glock trigger is that it really isn't anything better than a stock trigger. There is less take up and less over travel, but it is heavy. interesting. I have a Vogel Trigger and a Johnny Glocks trigger/striker in two Gen5 G34s. Both are 4.5# strikers I believe. Both are the same pull weight around 3lbs. The JG is a little more of a rolling break and Vogels is a little crisper -but there's really not much difference between the two to be honest. But both definitely better than stock. Link to comment Share on other sites More sharing options...
hermes_actual Posted November 9, 2020 Share Posted November 9, 2020 Anyone running a Vanek GSSF or Level 1 Trigger Kit in a Gen 5? Link to comment Share on other sites More sharing options...
paulc Posted November 17, 2020 Share Posted November 17, 2020 On 11/9/2020 at 12:08 PM, hermes_actual said: Anyone running a Vanek GSSF or Level 1 Trigger Kit in a Gen 5? I have Vanek GSSF Master trigger on my Gen5 G-34 carry optics setup. Like it a lot. Have pre and over travel adjustable housing too. Link to comment Share on other sites More sharing options...
hermes_actual Posted November 17, 2020 Share Posted November 17, 2020 19 hours ago, paulc said: I have Vanek GSSF Master trigger on my Gen5 G-34 carry optics setup. Like it a lot. Have pre and over travel adjustable housing too. Thanks. I went with the Level 1 on the same gun. I haven't gotten to the range yet, but it feels great in dry practice. Link to comment Share on other sites More sharing options...
JBP55 Posted November 20, 2020 Share Posted November 20, 2020 On 10/12/2020 at 9:29 AM, Tnbb33 said: My preference is just polish parts, lighter connector, and lighten the striker spring slightly, you are not going to get a da/sa quality trigger. As mentioned before all guns are different and some parts work better in one gun and not well in another, if you want to swap parts get several different kinds. Trigger weight matters less, practice and dry fire matters more. I have never seen anyone shoot a 6# trigger better than a 3# trigger in the same pistol. YMMV Link to comment Share on other sites More sharing options...
hermes_actual Posted November 21, 2020 Share Posted November 21, 2020 The Vanek Level 1 with the G34.5 measured at 2.5# (4.5# striker spring). Shot it a couple days ago. Pretravel distance felt about the same as stock but much much smoother until the wall. Reset is noticeably shorter than stock. I'm happy with it. Link to comment Share on other sites More sharing options...
rootacres Posted March 7, 2021 Share Posted March 7, 2021 Ive just been running a OCC trigger bar with the enhanced shoe, Zev 2lb striker spring w/ a skeleotlized striker and am getting sub 3lbs. A glock trigger will never be 1911/CZ/Tanfo good. just the nature of the beast but you don't have to defeat the double action pull on the first shot. Ive had both and like things about both. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now