MarilynMonbro Posted April 12, 2016 Share Posted April 12, 2016 I'm about to get a CZ 75 to play SSP and Production with it. What's the best and safest way to manually decock the hammer? I currently just pinch the hammer, pull trigger, and slowly lower it down. I'm wondering if there's a better and safer way of doing it Link to comment Share on other sites More sharing options...
Sarge Posted April 12, 2016 Share Posted April 12, 2016 Thats how the vast majority of shooters I run do it. Make sure you lower it ALL THE WAY down. Caught a shooter recently who had been lowering his to half cock only for a few years. He was astonished when I told him it had to go all the way down unless it had a decocker. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 12, 2016 Share Posted April 12, 2016 (edited) I used to use the Eurotrash method shown in this video: It's a very safe and controlled method. No risk of the hammer slipping like with the common approach of pinching and lowering it with the thumb and pointer finger of the weak hand. I've since switched to cowboy style and lower the hammer with my strong-hand thumb. Chicks dig it. Edited April 12, 2016 by kneelingatlas Link to comment Share on other sites More sharing options...
MRevolutionIX Posted April 13, 2016 Share Posted April 13, 2016 After having an AD using the pinch method during a class I was attending. I started to use the method shown in the video. Much safer way to do it. Link to comment Share on other sites More sharing options...
Scrmblr Posted April 13, 2016 Share Posted April 13, 2016 I've done both with zero problems. Whatever steals the most momentum from the hammer and it's meeting with the likely extended firing pin. Link to comment Share on other sites More sharing options...
andyroth Posted April 13, 2016 Share Posted April 13, 2016 Thats how the vast majority of shooters I run do it. Make sure you lower it ALL THE WAY down. Caught a shooter recently who had been lowering his to half cock only for a few years. He was astonished when I told him it had to go all the way down unless it had a decocker.Interesting. I just bought an sp01 tactical with a decocker. It decocks to half cock. Will that be allowed for production?Sent from my SM-G930T using Tapatalk Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 13, 2016 Share Posted April 13, 2016 Decockers are fine, just hit the lever and holster. Link to comment Share on other sites More sharing options...
MarilynMonbro Posted April 13, 2016 Author Share Posted April 13, 2016 That video is exactly what I needed. I knew there had to have been another way of doing it. Thank you posting it! Link to comment Share on other sites More sharing options...
tcazes Posted April 13, 2016 Share Posted April 13, 2016 Rolling meathod like the video and with some practice it is second nature!! Link to comment Share on other sites More sharing options...
pointerman1967 Posted April 13, 2016 Share Posted April 13, 2016 I use the roll method like the video. When I see people pinching it makes me cringe. A little oil on the finger tip and you could have trouble. Roll method is fool proof. Link to comment Share on other sites More sharing options...
45 Raven Posted April 13, 2016 Share Posted April 13, 2016 I use the roll method like the video. When I see people pinching it makes me cringe. A little oil on the finger tip and you could have trouble. Roll method is fool proof. I am absolutely not trying to be argumentative, but . . . . Sorry, but NOTHING is fool proof. De-cock the way you feel safest, but don't assume ANY method cannot or will not, let you down! Link to comment Share on other sites More sharing options...
DagoRed Posted April 14, 2016 Share Posted April 14, 2016 I'm reading this because I want a 9 and have been considering the cz for steel and if I ever try 3 gun. I wouldn't shoot it in production but might let my sister in law or friends borrow it. that said, I find it amazing that there is the rule about decocking guns for production. I thought the primary reason for the rules was to keep us all safe and make things fair. Seems this rule is all about making DA/SA guys use the DA as their first pull instead of being about safety. Am I wrong? if a gun has a safety wouldn't the best thing to do be leave it cocked with the safety on? Sorry if I"m missing something obvious. If somebody could point it out to me I'd appreciate it. Red Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 14, 2016 Share Posted April 14, 2016 No single-action guns in Production. Either striker-fired or DA/SA. Consequently, the first shot on a gun with a hammer must be a double-action one. Link to comment Share on other sites More sharing options...
Tok36 Posted April 14, 2016 Share Posted April 14, 2016 First time i have seen the rolling method. Interesting stuff. Link to comment Share on other sites More sharing options...
bthoefer Posted April 14, 2016 Share Posted April 14, 2016 I use the roll method like the video. When I see people pinching it makes me cringe. A little oil on the finger tip and you could have trouble. Roll method is fool proof.I am absolutely not trying to be argumentative, but . . . . Sorry, but NOTHING is fool proof. De-cock the way you feel safest, but don't assume ANY method cannot or will not, let you down! As soon as you make something fool proof, along comes an idiot. Link to comment Share on other sites More sharing options...
bthoefer Posted April 14, 2016 Share Posted April 14, 2016 Another vote here for the rolling method. Link to comment Share on other sites More sharing options...
shooterclay Posted April 14, 2016 Share Posted April 14, 2016 Looks like a good method. Link to comment Share on other sites More sharing options...
nahanshew89 Posted April 14, 2016 Share Posted April 14, 2016 (edited) No single-action guns in Production. Either striker-fired or DA/SA. Consequently, the first shot on a gun with a hammer must be a double-action one. Not 100% true. You have to lower the hammer before you holster, but if you wanted to, you could cock the hammer back after the draw to make the first shot SA. That was from Troy in the most recent Front Sight mag. I'm not saying you should, I'm saying you can. Edited April 14, 2016 by nahanshew89 Link to comment Share on other sites More sharing options...
slavex Posted April 14, 2016 Share Posted April 14, 2016 Not in IPSC you couldn't, maybe USPSA. In IPSC the first shot must be DA in Production except on unloaded gun starts. And people are correct, the rolling method isn't 100% perfect, none of them are. I demo this when teaching people, I tell them they must always look at holstering and decocking as things that need a conscious break before doing them. I then show them that I can roll my thumb out of the way fast enough to make the gun fire, and I let them see that so long as it's in a safe direction nothing bad will happen (other than a DQ at a match). No broken thumb or fingers or anything like that. I then let them try it if they wish, so that they get an idea of what it takes to mess that up. I definitely do prefer the roll method over any other, and I've seen some pretty wild "others" Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 14, 2016 Share Posted April 14, 2016 (edited) I find it amazing that there is the rule about decocking guns for production. I thought the primary reason for the rules was to keep us all safe and make things fair. Seems this rule is all about making DA/SA guys use the DA as their first pull instead of being about safety. Am I wrong? if a gun has a safety wouldn't the best thing to do be leave it cocked with the safety on? Sorry if I"m missing something obvious. If somebody could point it out to me I'd appreciate it. Red Red, Production rules are written to keep all the entry-level platforms on a somewhat even playing field, CZs and Tanfoglios are already the hot ticket, even handicapped with the hammer down start. What do you think the field would look like if you could start with a sub two pound SA trigger cocked and locked? Edited April 14, 2016 by kneelingatlas Link to comment Share on other sites More sharing options...
jrswanson1 Posted April 14, 2016 Share Posted April 14, 2016 Seems to me that you'd be better off shooting an SP-01 Tactical versus a regular SP-01 for Production. If it decocks like the P-07, it goes to the half-cock notch and makes things a bit easier on that first shot, and it's legal. Link to comment Share on other sites More sharing options...
bthoefer Posted April 14, 2016 Share Posted April 14, 2016 Seems to me that you'd be better off shooting an SP-01 Tactical versus a regular SP-01 for Production. If it decocks like the P-07, it goes to the half-cock notch and makes things a bit easier on that first shot, and it's legal. The decocker design of the tactical was clearly a practical joke/ ploy to sell replacement springs by CZ designers. Seriously, the decocker guns are a pain to work on and the trigger is not usually an nice as a safety version. Link to comment Share on other sites More sharing options...
teros135 Posted April 14, 2016 Share Posted April 14, 2016 As an aside (for the decocker fans), don't forget that at ULSC you can't use the decocker to lower the hammer. You have to pull the trigger to drop the hammer. I mention this because we had a "RO" locally who let folks decock and argued it was in the rules. Safety first. Link to comment Share on other sites More sharing options...
andyroth Posted April 14, 2016 Share Posted April 14, 2016 As an aside (for the decocker fans), don't forget that at ULSC you can't use the decocker to lower the hammer. You have to pull the trigger to drop the hammer. I mention this because we had a "RO" locally who let folks decock and argued it was in the rules. Safety first. ULSC = Unload And Show ClearI totally agree with that. The point of that whole bit after you are done shooting is to verify you have anew empty gun. Just decocking doesn't do that. Sent from my SM-G930T using Tapatalk Link to comment Share on other sites More sharing options...
pointerman1967 Posted April 14, 2016 Share Posted April 14, 2016 Not in IPSC you couldn't, maybe USPSA. In IPSC the first shot must be DA in Production except on unloaded gun starts. And people are correct, the rolling method isn't 100% perfect, none of them are. I demo this when teaching people, I tell them they must always look at holstering and decocking as things that need a conscious break before doing them. I then show them that I can roll my thumb out of the way fast enough to make the gun fire, and I let them see that so long as it's in a safe direction nothing bad will happen (other than a DQ at a match). No broken thumb or fingers or anything like that. I then let them try it if they wish, so that they get an idea of what it takes to mess that up. I definitely do prefer the roll method over any other, and I've seen some pretty wild "others" Interesting... I have not intentionally rolled my thumb incorrectly to make it go bang. I assumed I would end up with the slide cutting my thumb if I did so. Do you have video of making it go bang while rolling your thumb? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now