Joedirt199
-
Posts
188 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by Joedirt199
-
People who put the backup sights in front of the rmr may not work with this new sight. Would be nice to have a larger window and less tinted glass. Will it get dirtier closer to the chamber?
-
Forgot to turn my rmr on durring a 5k run and gun. First stage brought the gun up to shoot a 50 yard steel sillouette. No dot. Had to use the sights. It was the first time competing with the reddot p09.
-
Grab another comp-tac. Just got one for a 5" with rail and it takes my home built 9mm government with monolithic slide just fine. Was worried the holster would have molded slide scallops and not work with my non-scalloped slide.
-
Think the new mags have orange followers, old mags have black. I bought some from cz-usa and 3 were orange follower with 5 different holes in the bodybfor different mag catches. The black ones only had 2 slots for the p09 style mag catch.
-
Then you make a DIY controller switch that lets you toggle through the shots on your shooting chrony to get High, Low, Avg, SD, ES, and shot count. I am going to make an on/off switch at my remote so I don't have to get up and turn the unit off/on for each new string. Really brings the value of the $80 shooting chrony up with built in math. To think I have been doing it with a calculator and scratch paper all these years. On lazy days I just avg each shot in my head by going half way between the previous and next shot.
-
The old mags need converting. The new p09 mags should have the updated bodies to work in both.
-
I am getting good results in 9mm with it and looking to try some 45 loads. Very low sd's even on the low end of the charge amounts.
-
I trim the legs off the stock follower pretty much flush with the bottom. Gets me one more round and still locks the slide back. I am getting 3 rds with the +2 plastic bases, stock spring and follower. Cheapest 3 extra rounds.
-
I shot a local match with my j frame and pistolwear neoprene holster band and speed strips. Wore t shirt and workout shorts, my summer attire. Found out I needed to trim the tops of my grips to get the shells out faster. Other than that it was fun to stretch the legs on the little gun. Need to switch the powder cause tightgroup got that little gun hot.
-
Your delivery person is gonna hate you. I think some of my deliveries get left for my normal guy when he is out sick or on vacation. The fill ins won't deliver stuff and leave bogus excuses as to why. I know it is because my bullet orders are heavy.
-
I also run my summers bullets through my lee bullet sizer. P09 likes them .356, sp01 shadow and phantom like them .357. Priced cheap enough and enough coating to take the smoke out of shooting plain lead. Plus he has some flat pointed bullets in the .38/.357 section that make nice holes in targets.
-
Won't the tac 2 be a decocker model? I would stick with what you have.
-
I have loaded 244 with 135 summers coated RN in my p09 and shadow 1. 3.5 gives me single digit sd's at 950 fps and nice tiny groups (under an inch). I am liking it. COAL is 1.1"
-
Had one give me s#!t about disqualifying me for easing my hammer down after the stage to preserve my firing pin retaining pin. I have the slide held open, you can see there is no mag or round in the chamber. He was my first stage and set the mood for the whole match. It was a p09 with safeties installed.
-
Sent you an email or message pete. Not sure as I don't use the feature much on here.
-
That slide stop nub is pretty far forward to be riding with anything. It's hard enough to push the slide stop out with a fully functioning detent spring to keep it in. My money is on #4 is missing or broke since it keeps the tension on the spring to hold the slide stop in place.
-
Shadow is longer than the sp01 so if it has a closed end that probably wont work.
-
Spin them up in the drill with some sand paper and take some of the tightness out.
-
Powder measure springs?
Joedirt199 replied to ExStreetWalker's topic in Dillon Precision Reloading Equipment
You can disable the linkage by just unhooking the spring end that attaches to the small metal post that sticks out. I took 2 of the wifes rubber style hair ties to return the bar to closed. No more clunking shut as the bar stop hangs down and does not interfere with anything. -
I actually bought the one that needed repair second hand. Not sure if the guy that sold it to me knew the elevation went bad or not and I didn't check it till after I sent it off to primary machine to mount on my p09. Tried to zero when it came back and elevation didn't click or move the dot. Told them in the rma request that I bought it second hand and didn't seem to matter.
-
Just got a brand new rmr06 type 2 for the used rmr06 type 1 I sent in for repair, free of charge. Not too bad. We will see how this one does.
-
Figured that would be the option. I have been seeing p series guns for $350ish lately.
-
Where you get your slide? I would like a 40 upper to go with my 9mm so I can shoot major.
-
Good to know. I will get in touch with them and get a rma number
-
Just got a used rm06 and sent it to primary machine to mill and mount on my cz p09. Got it back and was playing with the adjustments to get a rough zero and the elevation does not click or seem to move the dot. Windage clicks and moves dot left to right. I used a chamber laser to try and get it to bore sight and couldn't get the dot to move down. Do you think running some rounds through it will knock it back loose? It has been super cold here and tomorrow is supposed to be nice so planning a trip to the range to break in the cerakoted slide anyways and test the backup sights.