bigdave24

SA frame also has ambi safety.

Mine (and it appears yours), has the upswept beaver tail. So I thought it was the CZ 75 SA frame, not the standard frame.

Isn’t that what cz custom’s cts-lsp is?

Let us know how those low profile screws work out. I had the same issue with the screw head of the 8-32 screws being too high.

The standard front sight on a TS is a 7.5 mm. But if you replace it with a fiberoptic, alot depends on how you aim with a fiberoptic. If you want point of impact to be directly under the dot, you probably want an 8.0 or 8.5 mm fiber optic. If you want point of impact to be above the dot, a 7.5 might work. It also depends on how your particular gun and your eye aim with the standard front sight.

It’s a great gun. Longer sight radius is nice, longer barrel lets you load with a tad less powder.

Swapping slides is usually fine. If not, get some lapping compound from Brownells and rack the slide back and forth a few times. That’s typically all that’s needed for a tight fit.

If the stock safety digs into your weak hand, you may want to grind the safety down, rather than placing an extended safety.

The stock front sight is 7.5 mm. I would shoot it first to see if that size works for you before deciding on the height of a FO sight.

Does the extended mag release reduce the pressure needed to drop the mag for you?

I've been able to interchange most slides, but I did have to lap one to the frame to get it to run smoothly. No big deal, just had to rack the slide a number of times with the lapping compound.

Use a size 83 O ring to dry fire with so the hammer hits the O ring instead of the firing pin.

I would confirm which screws will fit the cz multicut.

Thanks. It's very cool looking.

What trigger is that in the last photos?

My sp-01 longslide makes weight with a 10 round (NY) mag. I use it for ESP. I trimmed the back of the hammer and the beavertail so it would fit a little more easily. A start from the box is slower than with a smaller gun though. Thanks for the photos, himurax13.

I don't know how close m7x4 screws are to 8-32, but on my cz multicut, 8-32 screws threaded in easily and tightened. I used brass screws, as the softer threads will deform slightly under pressure, and so far they have held tight for several hundred rounds.

I would shoot the TS first before ordering a 7.5 mm FO sight. A lot depends on your load, and the sight picture you prefer. If you use the FO 'dot' as your impact point, you may be shooting high with a 7.5 mm sight.

Would it really involve more than lapping the slide to fit a different upper?

It's a neat idea. If you do it post a photo. In the meantime, if you cock the hammer before retracting the slide, you won't be fighting the main spring.

Very disappointed in Lee hand primer. It broke within a week. As you can see from photo, part seems very fragile, and there don't seem to be any replacements. http://cubeupload.com/im/bigdave24/lee.jpg

The frame is the same as the cz 75 Shadow.

147 xtreme rn, 1.132 oal, 3.5 gr N320.

Yes, it weighs less than 43 oz with empty mag.

I assumed S2 was referring to Shadow 2, or was it Stock 2?