rishii

My red dot is zeroed at 20 the green laser is at 7 for those hard lean shots on close targets with only the upper A visible I use the laser, when I shoulder the pcc the laser is visible easily out to 20yd

If a MD at my club did that, the next match I MD the start position for pcc would simply say muzzle down range and have a bunch of plates and hard cover and no shoots at 20yd as shrek said “can’t we all just get along”

I’m surprised no one mentioned getting a gun built by gans guns with him you send him a box of parts, and rather quickly you get a gun back, his work has always impressed me and they just flat out run http://gansguns.com/tobuild.html a costs cutting option is getting a brazos custom lightened slide instead of sending him a bare slide to cut up

I did that for a while, 650 for for my main calibers and an old 450 for everything else, after a while I slowly converted all my calibers over to the 650 because loading on the 450 just was too slow If I were you, I’d get another tool head for minor 9 and mark it so you don’t get them mixed up my 9mm tool head has a plain silver tool head, my major 9 has a black tool head and major9 labeled everywhere

Not that I know of when you order your frame and slide they will fit up the frame to slide, sight cuts, checkering and other machining for a fee, as far as I’ve seen, they will not fit a barrel or trigger group

Has anyone tried one of these https://www.homedepot.com/p/RIDGID-22-in-Pro-Gear-Cart-Tool-Box-in-Black-222573/205441921 its just an empty tool box Lockable, water and dust resistant, made to carry heavy loads and looks strong enough to sit on

To clean after loading I have a coffee can full of corn cob that I use only for that, add a little mineral sprits and tumble for 10 minutes or about the time it takes to fill up the ammo bin on a 650 and it come out nice and shiny

Add the binary engineering CFD comp to your list, I just finished up a major 9 build with 2 poppers holes and it shoots flatter than my 38 supercomp with the brazos comp I’m also running a caspian, The original caspian mags were marked 9mm/38 super and mine runs both with no problem

Almost anything is allowed in PCC, the only things that’s not allowed I can think of are pistol braces, because it on a pistol, bump stocks, binary triggers, tiedown or thigh mag pouches, and size by side mag couplers

This reminds me of when red dots first appeared on compguns, stage designers did stuff to mess with them, think a 2-3’ long port that’s 2” high, iron sights no problem, red dot turn the gun sideways, hard cover painted red etc after awhile the silliness went away and thing got back to normal now I see hurt feeling because a guy a shooting a rifle is beating pistol shooters in a pistol match the bottom line is he didn’t, the HOA is not an official score and hasn’t been for a couple of decades pcc competes against other pcc shooters, the open shooter didn't lose to the pcc because they’re not competing against each other, the same way the production shooter didn't lose to the open shooter and if it still bothered you, then it should be motivation to up your game i mainly shoot open because I enjoy it, I shoot pcc because it’s fun

I inspect my primers for major matches, and I noticed my last batch of Winchester spm some of the primers had less priming compound than others, i separated them, loaded them up for practice and chronoed. They all fired, and the velocity was the same as the ammo with the regular amount priming compound. I can totally see a few getting primers without any priming compound.

Don’t do the barrel, cerakote will rub off on the spots it contacts the slide, other than that you should have no issues

One more vote for the Lexus rx350 a couple of years back my wife told me she wanted a bigger suv, specifically the Lexus, and I went i checked out and test drove the Honda, crv & pilot, Acura RDX and mdx, Nissan Murano, Toyota 4Runner and Highlander, Lexus nx200 and rx350 when I compared the vehicles of similar size and comparably equipped they were all within a couple of grand of the rx350 It’s been a solid vehicle, in the 2.5 years we’ve had it, it’s gone in for scheduled maintenance, a recall and a software update but were up to me, I’d have gotten the 4Runner

Are they going to mimic the rib shape and length of the Schumann barrels ive been looking for a 5.4” threaded, with a blank 4 port rib and W/N ramp for a couple of years and I’m sure I’m not the only one

Any word if they’re planning on making barrels with the Wilson nowlin cut

I tried to have one load for production,SS, and PCC and gave up the PF for the pistols we’re barely minor to have the PCC hit 135 what I settled on was 4 gr of W231 under 115 blue bullet gave me a135 PF thru the PCC 135 blue bullet gave me a135 PF thru the handguns by simply changing bullet weights it allowed me to load both without having to change the settings on my press

Part of your problem is titegroup, it burns hot and it’s smoky for pcc I’m running blue bullets115 with w231 and I don’t notice any smoke, I also run the same bullet in my open gun and I do notice it does smoke compared to jhp, but not much

Good to know, blue bullets has always shipped out fast and that answered the question I had about usps, I figured it got lost then found in the Christmas rush

My PDs came in 3 days all the way to Hawaii usps works in mysterious ways My blue bullets on the other hand was shipped out quick, and sat in a NC distribution center for 10 days

Not to derail this thread my wife is looking a new laptop also, the question I have is do we take advantage of the Christmas sales or wait to the 2019 models come out the minimum specs I’m looking at is windows, 16 g of ram and a 512 ssd also We’ve had a HP and a Lenovo laptops and both were crap, any brands to stay away from

Thanks for the info I just finished a major 9 using the same comp and plan to send it awp for plating and I was thinking about not plating the comp but asking them to match finish

The. black scorpion mag pouch is adjustable for height, angle and cant

Same here, blue bullets115s come in a case of 3900, I would buy the same amount from PD with the discounted shipping

OPENB beautiful gun, is that CFD Ti comp, and did they plate it or left it bare and matched the finish of the rest of the gun

The fastest buy nickel supercomp and mark the bottom the cases stand out in a sea of brass, and make the bottom to confirm