kimberacp Posted April 29, 2011 Share Posted April 29, 2011 Fresh Atranite finish after Bobby Tritopped the slide. Cuts and finish turned out fantastic. Man I have missed shooting this one! It's good to be back. It started out at 38oz before the tritop cuts. Lighter the better. Balance is exactly how I wanted it. Magwell was not refinished this go around, I Ionbonded and hard coat anodized it two years ago (when I made it). what caliber???? Link to comment Share on other sites More sharing options...
want2race Posted April 29, 2011 Share Posted April 29, 2011 .45 Link to comment Share on other sites More sharing options...
rjennings10 Posted May 9, 2011 Share Posted May 9, 2011 (edited) This is my Spartan that I bought used from a friend that was getting out of single stack. Not the prettiest, but it shoots well. It has a Jim Joyce Mag-well, checkered front strap, not sure on the grips and magazine release button. I'm thinking about replacing the mainspring housing with an arched mainspring H. I will also prob use it in L-10 since It came with 8 ten round mags. Edited May 9, 2011 by rjennings10 Link to comment Share on other sites More sharing options...
Dave Gundry Posted May 11, 2011 Share Posted May 11, 2011 Looks like a decent setup - not sure if the grip tape on the frame is SS legal though - should be good for L10. Link to comment Share on other sites More sharing options...
gohuskers Posted May 12, 2011 Share Posted May 12, 2011 IDPA ESP gear and gun. USPSA SS gear and gun What magwells are you using? Link to comment Share on other sites More sharing options...
Scootertheshooter Posted May 13, 2011 Share Posted May 13, 2011 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
vxhybrid Posted May 13, 2011 Share Posted May 13, 2011 here is my pea shooter. hoping to start shooting uspsa, I have been shooting IDPA with her. currently mostly stock except 15# recoil spring, 19# main spring titanium hammer strut titanium main spring cap doug koneig hammer wilson combat xtra power firing pin spring badly needs a trigger job Link to comment Share on other sites More sharing options...
ChiefG Posted May 14, 2011 Share Posted May 14, 2011 Link to comment Share on other sites More sharing options...
blue Posted May 15, 2011 Share Posted May 15, 2011 IDPA ESP gear and gun. USPSA SS gear and gun What magwells are you using? those techwear sp Link to comment Share on other sites More sharing options...
OpenDot Posted May 19, 2011 Share Posted May 19, 2011 Going to have Predator Tactical install a magwell, I have about 4k in 45 I can run through this puppy.. Try it out in L10 for grins with these mags (i have 5 totals).. I also have 6 factory 8 round mags for single stack as well. Link to comment Share on other sites More sharing options...
steel1212 Posted June 6, 2011 Share Posted June 6, 2011 Link to comment Share on other sites More sharing options...
Sudden Death Posted June 6, 2011 Share Posted June 6, 2011 Corey got a new stick....... NICE !!! Link to comment Share on other sites More sharing options...
digby7 Posted June 9, 2011 Share Posted June 9, 2011 Corey got a new stick....... NICE !!! corey, whats the parts list and spec on that thing? Really nice. Link to comment Share on other sites More sharing options...
steel1212 Posted June 9, 2011 Share Posted June 9, 2011 Corey got a new stick....... NICE !!! corey, whats the parts list and spec on that thing? Really nice. STI: Frame/slide Schumann barrell EGW trigger kit Tripp K1 sight TechWell Mag well 40 cal Link to comment Share on other sites More sharing options...
chizzle Posted June 11, 2011 Share Posted June 11, 2011 Fresh Atranite finish after Bobby Tritopped the slide. Cuts and finish turned out fantastic. Man I have missed shooting this one! It's good to be back. It started out at 38oz before the tritop cuts. Lighter the better. Balance is exactly how I wanted it. Magwell was not refinished this go around, I Ionbonded and hard coat anodized it two years ago (when I made it). Can I ask where you got your grips (or if you made them)? Link to comment Share on other sites More sharing options...
hankfan79 Posted June 12, 2011 Share Posted June 12, 2011 I am glad to be able to finally post something in this thread. I believe it is the first one on here. Sorry for the quality, this picture was taken with my Droid phone. Ruger SR1911 Warren Tactical(Sevigny Series)Sights Smith and Alexander magwell Wilson Combat Extended Slide Release Ed Brown Hammer Link to comment Share on other sites More sharing options...
foilhat Posted June 12, 2011 Share Posted June 12, 2011 A few I have sitting around. Link to comment Share on other sites More sharing options...
twister Posted June 19, 2011 Share Posted June 19, 2011 Corey,very nice, clean looking pistol. Link to comment Share on other sites More sharing options...
steel1212 Posted June 19, 2011 Share Posted June 19, 2011 Fresh Atranite finish after Bobby Tritopped the slide. Cuts and finish turned out fantastic. Man I have missed shooting this one! It's good to be back. It started out at 38oz before the tritop cuts. Lighter the better. Balance is exactly how I wanted it. Magwell was not refinished this go around, I Ionbonded and hard coat anodized it two years ago (when I made it). Can I ask where you got your grips (or if you made them)? He made them. Link to comment Share on other sites More sharing options...
Avezorak Posted June 19, 2011 Share Posted June 19, 2011 Ok After having it nearly a year, I finally got around to getting some decent pics of my 1911. Thanks Andrew! Springfield Armory 1911 A1 Loaded Black Stainless Atranite slide and barrel by Freedom Gunworks STI TAS rear and Dawson red FO front sight STI short curved trigger Ed Brown extended mag release with oversize button VZ 320 canvas grips EL CHEAPO plastic magwell(soon to be gone) I love this gun! Link to comment Share on other sites More sharing options...
Ed Robinson Posted June 21, 2011 Share Posted June 21, 2011 AFter looking at 23 pages of others, I'm gonna throw mine in. These are 2 I built several years ago. The top is a LW commander on Caspian frame and slide, IIRC all Ed Brown parts, SS slide and alum frame left white. The second is my buddies, also built on Caspian. Commander slide and officers frame (before anybody else was doing it) Ed Brown parts done in Moly Resin black. This little thing will flat shoot. It will way outshoot my commander and will nearly hang with my EDGE. Link to comment Share on other sites More sharing options...
JDHunz Posted June 22, 2011 Share Posted June 22, 2011 Sent from my iPhone using Tapatalk Holy cow...they could be long lost twins!!! Here is mine... Link to comment Share on other sites More sharing options...
Scootertheshooter Posted June 22, 2011 Share Posted June 22, 2011 I found my lost twin!!!!!!!! Both are pretty sexy Sent from my iPhone using Tapatalk Holy cow...they could be long lost twins!!! Here is mine... Link to comment Share on other sites More sharing options...
Bike Effects Posted June 23, 2011 Share Posted June 23, 2011 My turn. Link to comment Share on other sites More sharing options...
Apexer Posted June 23, 2011 Share Posted June 23, 2011 Bike, that is a clean looking Baer. What magwell is that? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now