foilhat Posted January 10, 2011 Share Posted January 10, 2011 Nice job OG, that's a good looking pistol. Link to comment Share on other sites More sharing options...
StraightUp_OG Posted January 11, 2011 Share Posted January 11, 2011 Thank you Sir! It's my best effort, to date. Link to comment Share on other sites More sharing options...
Zerwas Posted January 16, 2011 Share Posted January 16, 2011 Here is my new baby: Springfield Custom Shop 40 caliber TRP Professional-Z. Built to the same specifications as a TRP Professional model with the following changes: 40 caliber Adustable rear site .100 front fiber optic site Full length guide rod Short curved trigger with 2.5lb crisp let off Front cocking serrations Link to comment Share on other sites More sharing options...
steel1212 Posted January 16, 2011 Share Posted January 16, 2011 (edited) That is phenomenal!!! Trade ya mil spec for it :-) Edited January 16, 2011 by steel1212 Link to comment Share on other sites More sharing options...
Zerwas Posted January 16, 2011 Share Posted January 16, 2011 That is phenomenal!!! Trade ya mil spec for it :-) Thanks for the kind words sir. I just might make that trade..... I'll see ya at SS nationals and we can talk..... Link to comment Share on other sites More sharing options...
steel1212 Posted January 16, 2011 Share Posted January 16, 2011 That is phenomenal!!! Trade ya mil spec for it :-) Thanks for the kind words sir. I just might make that trade..... I'll see ya at SS nationals and we can talk..... Absolutely I would love to see that gun. I've always wanted a pro and a pro in .40 is just that much better! Link to comment Share on other sites More sharing options...
digby7 Posted January 16, 2011 Share Posted January 16, 2011 Here is my Wilson classic singlestack that I actually run in L10 most of the time with 10 round tripp mags. SVI Trigger Dawson Magwell/Front sight Link to comment Share on other sites More sharing options...
RickB Posted January 17, 2011 Share Posted January 17, 2011 This is one that I sold earlier this year, having not really shot it for four or five years. Gold Cup slide on Caspian barstock frame, Kart barrel, Wilson sight, matte blue finish. This is the gun I currently shoot in Single Stack, posed in its new suit. Colt M1991A1, Kart barrel, SVInfinity lockwork, Heinie/Dawson sights, DiamondBlack finish (Davis Leather Gunsite Omega rig). Link to comment Share on other sites More sharing options...
usmc1974 Posted January 17, 2011 Share Posted January 17, 2011 Nastoff .45. It has the newer dual port comp. I think is identical to the gun Jerry Barnhart won the 1987 Nationals with. Sorry, not SSD compliant. Maybe I'll take it out to shoot today for old times sake. long long a go from a galaxy far far away memories Link to comment Share on other sites More sharing options...
usmc1974 Posted January 17, 2011 Share Posted January 17, 2011 This is one I love to play with. Link to comment Share on other sites More sharing options...
buck-boost Posted January 25, 2011 Share Posted January 25, 2011 [i.m.g]http://img196.imageshack.us/img196/3964/p1010047dk.jpg[/img] Here is my Wilson classic singlestack that I actually run in L10 most of the time with 10 round tripp mags. SVI Trigger Dawson Magwell/Front sight That is an awesome Wilson. I would love to compare it to my classic. Link to comment Share on other sites More sharing options...
Victor_R Posted January 25, 2011 Share Posted January 25, 2011 IDPA ESP gear and gun. USPSA SS gear and gun Link to comment Share on other sites More sharing options...
digby7 Posted March 3, 2011 Share Posted March 3, 2011 9mm wilson cqb that I shoot in L10 minor - SVI trigger with short flat insert - SVI Magwell/mainspring housing - Wilson rear speed sight with .145 U-notch - Dawson .185 tall by .100 wide front serrated sight - Wilson single side wide competition safety - Wilson extended magazine release button - 10 pound recoil spring - 17 pound main spring - 2 pound trigger Link to comment Share on other sites More sharing options...
Sliv2 Posted April 3, 2011 Share Posted April 3, 2011 My Wilson CQB Elite. Only shot it in CDP so far. Hoping to give it a run in SS. Link to comment Share on other sites More sharing options...
foilhat Posted April 12, 2011 Share Posted April 12, 2011 My Kimber worked over by Rich at Canyon Creek. Link to comment Share on other sites More sharing options...
kellymc Posted April 12, 2011 Share Posted April 12, 2011 Spartian 9mm Hardcromed and tuned stright from Dawson Link to comment Share on other sites More sharing options...
TISCHLJ Posted April 13, 2011 Share Posted April 13, 2011 STI TROJAN .40 Standard STI FLGR Tri-Top and serrations by GANS AFTEC C/S Ultra lite speed 2 Hammer, disconnect and LMOS sear SV Wide Ambi and Magwell assembly Mitchell RH Mag release Dawson .100x 160 F/S XT grips with custom grit 41.2 oz with Wilson NX 10MM MAG and Trimmer ext basepad . . . soon to be spruced up . . . Link to comment Share on other sites More sharing options...
scooterj Posted April 16, 2011 Share Posted April 16, 2011 Link to comment Share on other sites More sharing options...
Mike Dame Posted April 18, 2011 Share Posted April 18, 2011 (edited) Edited April 18, 2011 by Mike Dame Link to comment Share on other sites More sharing options...
caz41 Posted April 18, 2011 Share Posted April 18, 2011 Very nice. Details on it? Link to comment Share on other sites More sharing options...
Mike Dame Posted April 18, 2011 Share Posted April 18, 2011 (edited) STI slide, used a 3/4" ballnose for the top cuts STI Master frame cut to standard length and lightened in the grip and inside the dust cover Barsto Bull barrel turned down for a bushing VCD grips Ed Brown ambi's McCormick hammer/sear S&A magwell STI for the rest Edited April 18, 2011 by Mike Dame Link to comment Share on other sites More sharing options...
Jody Waring Posted April 24, 2011 Share Posted April 24, 2011 Nice work Mike, did you do it all yourself? Link to comment Share on other sites More sharing options...
Mike Dame Posted April 24, 2011 Share Posted April 24, 2011 thanks, didnt do the original barrel fit, when it was a bull, but I did everything else Link to comment Share on other sites More sharing options...
astephenson Posted April 25, 2011 Share Posted April 25, 2011 (edited) My 9mm Trojan...used primarily for IDPA ESP and a little Singlestack. The finish is pretty bad and I'm looking forward to having it chromed by APW after the season is over this year. Edited April 25, 2011 by WellArmedSheep Link to comment Share on other sites More sharing options...
want2race Posted April 29, 2011 Share Posted April 29, 2011 Fresh Atranite finish after Bobby Tritopped the slide. Cuts and finish turned out fantastic. Man I have missed shooting this one! It's good to be back. It started out at 38oz before the tritop cuts. Lighter the better. Balance is exactly how I wanted it. Magwell was not refinished this go around, I Ionbonded and hard coat anodized it two years ago (when I made it). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now