Akacala Posted June 25, 2013 Share Posted June 25, 2013 (edited) Just wondering what everyone uses for mag pouches. I've been using a double mag pouch from Blade tech for IDPA, but I'm looking at starting USPSA as well and will need room for more mags. Edit: should have mentioned the gun in question is a 75 Shadow. Edited June 25, 2013 by Akacala Link to comment Share on other sites More sharing options...
gixxerjunky Posted June 25, 2013 Share Posted June 25, 2013 I use 5 CR speed mag holders. They are great for USPSA because they stick out from your body and allow you to get a good grip on the mag. They are a little expensive though. Link to comment Share on other sites More sharing options...
blairmckenzie1 Posted June 25, 2013 Share Posted June 25, 2013 safariland 773 for my para and my glock (they come in two sizes) Link to comment Share on other sites More sharing options...
burningsquirrels Posted June 25, 2013 Share Posted June 25, 2013 Anything rated for beretta 92F or sig p226 will work. I use and prefer safariland 771 on ELS or their belt loop, but have also used CR speed (has cz spacer) and others also use double alpha. Link to comment Share on other sites More sharing options...
Andreas Posted June 25, 2013 Share Posted June 25, 2013 I'm using the DAA Race Masters. The magazines release smoothly when you grab them yet are held tightly enough for handstands. No worries about leaving a trail of magazines. Tension is fully adjustable. They're definitely a buy-it-for-life item. I haven't tried the Racer, but it appears to offer 80% of the goodness for 50% of the cost. They appear to loose some mounting flexibility, but that's probably not an issue for shooting Production. Both can be mounted at 90 degrees from the body if that's how you roll. Link to comment Share on other sites More sharing options...
JesseM Posted June 25, 2013 Share Posted June 25, 2013 I use Ready Tactical mag pouches. They aren't listed as something he makes but I sent them an email to ask about it and they made me some. I used them in IDPA and USPSA Production. Link to comment Share on other sites More sharing options...
steel1212 Posted June 25, 2013 Share Posted June 25, 2013 DAA racers. Saves a little weight over the racemasters. Link to comment Share on other sites More sharing options...
motosapiens Posted June 25, 2013 Share Posted June 25, 2013 ghost mag pouches are very reasonably priced, and allow you to run the bullets facing out, if you like that. Several of us here tried them after seeing ben stoeger with them, and so far we all like them alot. Link to comment Share on other sites More sharing options...
mspiredm3 Posted June 25, 2013 Share Posted June 25, 2013 DAA Racemasters over here, love them, but you can't go wrong with CR Speed or the Safariland 773's either. Link to comment Share on other sites More sharing options...
CZinSC Posted June 25, 2013 Share Posted June 25, 2013 I'm using the DAA Race Masters. The magazines release smoothly when you grab them yet are held tightly enough for handstands. No worries about leaving a trail of magazines. Tension is fully adjustable. They're definitely a buy-it-for-life item. I haven't tried the Racer, but it appears to offer 80% of the goodness for 50% of the cost. They appear to loose some mounting flexibility, but that's probably not an issue for shooting Production. Both can be mounted at 90 degrees from the body if that's how you roll. Be careful with mounting the Racers at 90*. The don't have the same attachment for 90* that they do for bullets forward. The belt attachment has a cog like attach point. The mag pouch has a cog like attach point on the side for bullets pointing forward method. The pouch is very secure with the cogs lining up. When you switch to 90*, the mag pouch is a smooth flat surface. You can still mount it, but there is no matching cog like surface so they have the tendency to rotate. I wanted to mount mine 90*, but because of this, I had to go back to bullets forward. I'm looking to move over to the Ghost 360's because I've been told they are very solid and mount 90* with no issues. Link to comment Share on other sites More sharing options...
z40acp Posted June 25, 2013 Share Posted June 25, 2013 I bought the Ghosts for my S&W M&P and now use them with a SP01 Shadow. The angle adjusts easily and securely. They also come with two holders each, one is normal and the other bullets facing out. Link to comment Share on other sites More sharing options...
Carnifex Posted June 25, 2013 Share Posted June 25, 2013 I'm using the DAA Race Masters. The magazines release smoothly when you grab them yet are held tightly enough for handstands. No worries about leaving a trail of magazines. Tension is fully adjustable. They're definitely a buy-it-for-life item. I haven't tried the Racer, but it appears to offer 80% of the goodness for 50% of the cost. They appear to loose some mounting flexibility, but that's probably not an issue for shooting Production. Both can be mounted at 90 degrees from the body if that's how you roll. Be careful with mounting the Racers at 90*. The don't have the same attachment for 90* that they do for bullets forward. The belt attachment has a cog like attach point. The mag pouch has a cog like attach point on the side for bullets pointing forward method. The pouch is very secure with the cogs lining up. When you switch to 90*, the mag pouch is a smooth flat surface. You can still mount it, but there is no matching cog like surface so they have the tendency to rotate. I wanted to mount mine 90*, but because of this, I had to go back to bullets forward. I'm looking to move over to the Ghost 360's because I've been told they are very solid and mount 90* with no issues. Is this the same for the Racemasters as well or just the Racers? Link to comment Share on other sites More sharing options...
CZinSC Posted June 26, 2013 Share Posted June 26, 2013 No, the Racemasters have different mounting points. The sideways is a little different than the 90*, but if you mount 90*, it will remain secure. I had them for several months. I didn't like the Racemasters for two reasons: they were scraping the magazines ( the aluminum edges started gouging the mags ), plus when you have 5 of them on your belt ( Production ), it can get a little heavy. Link to comment Share on other sites More sharing options...
ThomasM Posted June 26, 2013 Share Posted June 26, 2013 I have the Race Masters and I don't like that it rubs metal on metal. The marks it leaves on mags are cosmetic and will just rub off but it still makes me thing the mag holder is slowly wearing out with each draw. Link to comment Share on other sites More sharing options...
Magnus DUX Posted November 21, 2013 Share Posted November 21, 2013 Just switched from CR Speed Versa to Ghost 360. CR with Glock attachment needed to be adjusted all the time and I felt that the tension was a little too great for my first mag even at the loosest setting. Ghost tension is not adjustable but magazine slides out very smoothly. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
BeerBaron Posted November 22, 2013 Share Posted November 22, 2013 I really like the CR speed pouches. come with a range of inserts to fit almost any mag, and if you go single stack later on they also sell single stack inserts now too. I've never had to adjust tension with them using them with CZ shadow mags. once set-up the first time they have stayed fine for a number of years. They are my pick for the money. The DAA racer pouches are nice too and have a good tension system. I'd rate them about equal. the DAA racemasters are nice but I've no idea why anyone would actually prefer alloy pouches over plastic? they are heavier and they will wear your mag finish off much quicker... it's also really easy to attach a magnet to your front CR speed pouch if you want to (and if the division you are in allows it). I run with 5 CR speed pouches on my belt with no problem. Link to comment Share on other sites More sharing options...
CDPMatt Posted November 23, 2013 Share Posted November 23, 2013 Ghost.... Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Sarge Posted November 23, 2013 Share Posted November 23, 2013 I use Ready Tactical mag pouches. They aren't listed as something he makes but I sent them an email to ask about it and they made me some. I used them in IDPA and USPSA Production. +1000 The ReadyTactical pouches are so often overlooked but they are great pouches. Simple, slick , take up less belt space and are cheaper than anything else. They are all I use in Production. I use Racemasters in Open. They are awesome pouches but are overkill for Production. Link to comment Share on other sites More sharing options...
myproverb Posted November 25, 2013 Share Posted November 25, 2013 Ghost--great price. Link to comment Share on other sites More sharing options...
Gandof Posted November 25, 2013 Share Posted November 25, 2013 RLN pouches and holster for production and SSP. I'll leave the Ghosts and Racers for you open and limited guys. Link to comment Share on other sites More sharing options...
JaeOne3345 Posted January 28, 2014 Share Posted January 28, 2014 I'm using the DAA Race Masters. The magazines release smoothly when you grab them yet are held tightly enough for handstands. No worries about leaving a trail of magazines. Tension is fully adjustable. They're definitely a buy-it-for-life item. I haven't tried the Racer, but it appears to offer 80% of the goodness for 50% of the cost. They appear to loose some mounting flexibility, but that's probably not an issue for shooting Production. Both can be mounted at 90 degrees from the body if that's how you roll. Be careful with mounting the Racers at 90*. The don't have the same attachment for 90* that they do for bullets forward. The belt attachment has a cog like attach point. The mag pouch has a cog like attach point on the side for bullets pointing forward method. The pouch is very secure with the cogs lining up. When you switch to 90*, the mag pouch is a smooth flat surface. You can still mount it, but there is no matching cog like surface so they have the tendency to rotate. I wanted to mount mine 90*, but because of this, I had to go back to bullets forward. I'm looking to move over to the Ghost 360's because I've been told they are very solid and mount 90* with no issues. This isn't true. That cog you're talking about pops out so you can place it on the rear of the pouch. Link to comment Share on other sites More sharing options...
alma Posted January 28, 2014 Share Posted January 28, 2014 I am using the DAA Race Master pouches and really like them. When I shot Glocks I ran Kytac pouches and if the tension wasn't just right you get impromptu yard sales for magazines on CoF with lots of running. DAA RMs have great retention but I have had an issue with occasionally catching the mag release hole on the corner of the RM when removing the mag at the wrong angle. I removed a bit of material from the inside of the pouch to eliminate this problem. For 3 gun I recently got a CZ TS and got some Safariland 773 pouches sized for Glock magazines. They worked okay out of the box but I put a mag in and heated them up a but while in a vise to get them to the perfect width. Then I swapped out the stock rollers with some wider Lego wheels that just happened to be the exact right fit to contact the mags. You would have no idea that they weren't made for the CZ TS now. Link to comment Share on other sites More sharing options...
sroe3 Posted January 28, 2014 Share Posted January 28, 2014 I started using Ghost 360s, bullets out, just this month. Practice was weird but at a matches I was so focused on other stuff I didn't notice anything different. Link to comment Share on other sites More sharing options...
Maxximuss Posted September 3, 2014 Share Posted September 3, 2014 Is there any options for the 773's that doesn't require Legos and modifications? Link to comment Share on other sites More sharing options...
zhunter Posted September 3, 2014 Share Posted September 3, 2014 Ghost 360's here Bullets forward, but I really believe bullets out is the best way to go Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now