Bill Schwab Posted January 10, 2016 Share Posted January 10, 2016 Punch the pin from the half-blind side. Remember to deburr the extractor slot. Cool, that's what I thought, thanks. Will do. Link to comment Share on other sites More sharing options...
Huch Posted January 10, 2016 Share Posted January 10, 2016 I put a video up a few month back showing how to do it. If you search my posts you should be able to find it pretty easily. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
assaultthesalt Posted January 13, 2016 Share Posted January 13, 2016 Ammo question.....I normally shoot Fiocchi 7.5 3 dram 1 1/8 loads 1250 fps Well, my better half bought me 2 cases of 1165 low recoil Fiocchi.Any of yall have problems with them cycling in a M3K ? I have about 200 rounds through her and I polished all moving parts.Wont get to try them until Friday.My first 2Gun match is Saturday..LOL Link to comment Share on other sites More sharing options...
P.E. Kelley Posted January 13, 2016 Share Posted January 13, 2016 (edited) I would not shoot them at a match. Inertia guns need recoil to operate. It is important to know what payload is being pushed to 1165fps? 1 1/4 ounce will run the gun. 1 1/8 ounce is at the bottom of the operating window Yea, yea....lots of guys will be on posting in a minute that their gun runs with them...that's great. But inertia guns have other factors to consider. But my explaining all of them will only be overshadowed by the "it works in my gun" posts. So that's my opinion. Good luck. Here is a video that shows how these guns operate. and another Edited January 13, 2016 by P.E. Kelley Link to comment Share on other sites More sharing options...
assaultthesalt Posted January 13, 2016 Share Posted January 13, 2016 It's 1 oz loads. at 1165fps .....I have some 7.5's 1 1/8 oz at 1290 I'll borrow from my daughter. LOL Link to comment Share on other sites More sharing options...
Bill Schwab Posted January 16, 2016 Share Posted January 16, 2016 So at last match I had failures to eject (seems to be fixed by smoothing extractor channel and installing Benelli parts) and I also had double feeding in to the lifter. Fired 88 shells today consisting of Rem STS and Wal-Mart Federal and have one double feed per type of ammo. Pic below. Any clues on what could be causing this? My loading port cuts are very mild compared to what I see on here. Link to comment Share on other sites More sharing options...
Steve RA Posted January 16, 2016 Share Posted January 16, 2016 Have you tried "hotter" ammo ?? It's possible the bolt may not be going far enough back. Link to comment Share on other sites More sharing options...
assaultthesalt Posted January 16, 2016 Share Posted January 16, 2016 Well Fiiochi low recoil 1165fps.....no Bueno !! Got some 1300fps Remington Nitro Sporting Clays ......BUT....dang they got some recoil !!! LOL Link to comment Share on other sites More sharing options...
Steve RA Posted January 16, 2016 Share Posted January 16, 2016 Work your way down until it malfunctions again and then go up a notch. Link to comment Share on other sites More sharing options...
assaultthesalt Posted January 16, 2016 Share Posted January 16, 2016 Steve RA.....that's my plans.Just gotta have time. LOL Link to comment Share on other sites More sharing options...
Hoosiershooter Posted January 20, 2016 Share Posted January 20, 2016 I'm not sure where you are, but I had some running issues this weekend. I was shooting some 1 1/8 that should be around 1180ish. But it was literally freezing and they wouldn't make power. Something to keep in mind is powder can be temp sensitive. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
assaultthesalt Posted January 22, 2016 Share Posted January 22, 2016 Hoosiershooter.......LOL...Im in Texas....it can be 80* one minute and then 30* the next...and this is in December and January !!! LOL Link to comment Share on other sites More sharing options...
Cody_2130 Posted February 7, 2016 Share Posted February 7, 2016 Just ordered my m3k, gonna grab an extention and follower from moa and pretty much call it a day, excited to see how it runs Link to comment Share on other sites More sharing options...
Hoosiershooter Posted February 8, 2016 Share Posted February 8, 2016 Just ordered my m3k, gonna grab an extention and follower from moa and pretty much call it a day, excited to see how it runs Grab a Dremel and you're all set. They polish up nice. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Phong Nguyen Posted February 8, 2016 Share Posted February 8, 2016 Anyone know if MOA Precision is back up and running? Thinking about adding a P3K to the vault. Link to comment Share on other sites More sharing options...
Huch Posted February 8, 2016 Share Posted February 8, 2016 Anyone know if MOA Precision is back up and running? Thinking about adding a P3K to the vault. I knew you'd see the light sooner or later! -Hugh Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Cody_2130 Posted February 9, 2016 Share Posted February 9, 2016 Just ordered my m3k, gonna grab an extention and follower from moa and pretty much call it a day, excited to see how it runsGrab a Dremel and you're all set. They polish up nice. Sent from my iPhone using Tapatalk I'm going to see how loading quads goes with the stock port before I take a dremel to the first brand new shotgun I've ever bought lol Link to comment Share on other sites More sharing options...
3GDad Posted February 9, 2016 Share Posted February 9, 2016 I traded email with Tom at MOA today. He is in the shop, and working hard to catch up. Link to comment Share on other sites More sharing options...
Nebwake Posted February 9, 2016 Share Posted February 9, 2016 Just ordered my m3k, gonna grab an extention and follower from moa and pretty much call it a day, excited to see how it runs Grab a Dremel and you're all set. They polish up nice. Sent from my iPhone using Tapatalk Did you polish the whole bottom of the receiver or is it just the camera? Link to comment Share on other sites More sharing options...
Hoosiershooter Posted February 9, 2016 Share Posted February 9, 2016 The bottom is polished. Wherever I took the park off I polished. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
chrislovett Posted February 10, 2016 Share Posted February 10, 2016 Anyone know if MOA Precision is back up and running? Thinking about adding a P3K to the vault. Yes he is, I ordered some stuff from MOA last Monday and received it all on Saturday..can't ask for better service than that after all he's been through just since shot show. Link to comment Share on other sites More sharing options...
RadarLuv Posted February 10, 2016 Share Posted February 10, 2016 Good news about MOA I sent mine in to be worked over before Christmas eagerly awaiting its return. Link to comment Share on other sites More sharing options...
openclassterror Posted February 10, 2016 Share Posted February 10, 2016 (edited) I am not very good at putting together Enos Handles and customer names, but all the shotguns that arrived before SHOT should be going out this week. We lost a big chunk of time after the wreck, but we are getting back on track. Unfortunately, the biggest hurdle has been catching up on emails. We typically get 2-300 emails a day, but between SHOT show and the week we lost from the accident, we have literally THOUSANDS of emails. I spend 2-3 hours a day responding, but that cuts into time spent on the guns as well. We are getting there, slow but sure. I have already been here 12 hours today, and yesterday was a 16-hour day. Small parts orders are caught up through yesterday except custom recoil pads, and we ONLY have about 15 custom Stoeger builds going simultaneously right now Tom Edited February 10, 2016 by openclassterror Link to comment Share on other sites More sharing options...
Mike9250 Posted February 10, 2016 Share Posted February 10, 2016 What is everyone using for slugs? I tried some of the 7/8oz Fiocchi low recoil (1300fps), but they wouldn't cycle in my gun. I see Fiocchi makes a 1oz low recoil, but it's only 1150fps. So it seems that it is the same powder charge as the 7/8, just a heavier slug. Will that work better? In the meantime I'm using Federal reduced recoil 1oz at 1300 fps and they run great. Link to comment Share on other sites More sharing options...
Jim Norman Posted February 10, 2016 Share Posted February 10, 2016 I run the 1oz. Fiocchi, but if the Federals are working and you have them, use them. The cost of slugs in a match is far less than the cost of a malfunction. If you want to cut it close, do it in practice, use the 100% stuff in matches. Remember the difference between going home and going home happy might be one slug FTE. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now