mizer67 Posted December 29, 2011 Share Posted December 29, 2011 I use Starline for new cases if I feel spendy, but what's the "best" brass that's available once fired? Quote Link to comment Share on other sites More sharing options...
Sarge Posted December 29, 2011 Share Posted December 29, 2011 Any of the biggies are good to go. Win, RP,FC, CCI/Speer Quote Link to comment Share on other sites More sharing options...
blind bat Posted December 29, 2011 Share Posted December 29, 2011 I bought a bunch of 9mm brass from Fireant. It was mostly PMC brass. I use an undersized sizing die and that stuff sized smoother than anything I can remember. I just chamber checked 500 rounds with a Dillon gage and I had less than 10 rejects which is pretty exceptional in my experience. I'm interested to see how the SD numbers compare to my usual batch of mixed brass. So far I've been really impressed with this PMC stuff. Quote Link to comment Share on other sites More sharing options...
Recoil45 Posted December 29, 2011 Share Posted December 29, 2011 (edited) I just used mixed brass and don't have any problems. A lot of it, is more than once fired. Edited December 29, 2011 by Recoil45 Quote Link to comment Share on other sites More sharing options...
Jay870 Posted December 29, 2011 Share Posted December 29, 2011 If I am paying for once fired then I prefer WIN, and always load my major match ammo in WIN. For practice & locals I use mixed. Quote Link to comment Share on other sites More sharing options...
Dan Hefta Posted December 29, 2011 Share Posted December 29, 2011 Whatever is free works for me! Quote Link to comment Share on other sites More sharing options...
Trini Posted December 29, 2011 Share Posted December 29, 2011 I use what brass I get at the range.. Work a few big matches and lots of brass. The 9mm is loaded for production use. Quote Link to comment Share on other sites More sharing options...
LPatterson Posted December 29, 2011 Share Posted December 29, 2011 I no longer use picked up 9MM range brass, I have watched too many 9Major shooters who shoot it and leave it lay. They don't want it even if someelse picks it up for them. I have even done the same thing with a brand I no longer want to use because I only have 5-600 of. Next spring I have 1000 or more to give to a Production at the local club because I am switching to Open 40. Quote Link to comment Share on other sites More sharing options...
RH45 Posted December 30, 2011 Share Posted December 30, 2011 Winchester. Quote Link to comment Share on other sites More sharing options...
Jeff9mmM&P Posted December 30, 2011 Share Posted December 30, 2011 I use it all. Quote Link to comment Share on other sites More sharing options...
mizer67 Posted December 30, 2011 Author Share Posted December 30, 2011 Let me re-phrase my question, if you were shooting for 50 yard accuracy, and couldn't use a new case, which once fired brass would you pick? Would you pick the same case for durability? Quote Link to comment Share on other sites More sharing options...
Dan Hefta Posted December 30, 2011 Share Posted December 30, 2011 Let me re-phrase my question, if you were shooting for 50 yard accuracy, and couldn't use a new case, which once fired brass would you pick? Would you pick the same case for durability? I never shoot 50 yards but I think that the bullet and the load you choose would be more of an issue than the case. Quote Link to comment Share on other sites More sharing options...
kevin c Posted December 30, 2011 Share Posted December 30, 2011 Let me re-phrase my question, if you were shooting for 50 yard accuracy, and couldn't use a new case, which once fired brass would you pick? Would you pick the same case for durability? I never shoot 50 yards but I think that the bullet and the load you choose would be more of an issue than the case. That's my opinion too. If you want extra consistency, supposedly once fired same brand cases, preferably from the same lot of ammunition, might be more consistent, if you already had the specific load tuned to your gun, and had superbly consistent reloading technique. Any of the major brands will do. In our game (IPSC/IDPA/SS), if you can consistently get the shots into a six inch circle at 50 yards, the load will do the job 99% of the time. Quote Link to comment Share on other sites More sharing options...
warpspeed Posted December 31, 2011 Share Posted December 31, 2011 My favorite is nickle plated Federal brass. Runs through the press & gun very smooth. Quote Link to comment Share on other sites More sharing options...
diversmith Posted January 2, 2012 Share Posted January 2, 2012 I have recently loaded up just over 3500 rounds of 9mm on my 650 using all range pick ups. I save PMC, Fed, R-P, RWS, Speer, Top Brass, CCI, Win...I have had no issues so far with anything and I gauge all my reloads in a EGW block. I have had very few not gauge in the EGW but that have all gauged when I try them in my Dillon gauge. They have run frine thru my factory Glock barrels. I throw all other "off brands" in the scrap bucket to recycle i.e. Geco, S&B, NT marked brass Quote Link to comment Share on other sites More sharing options...
Chris Keen Posted January 3, 2012 Share Posted January 3, 2012 Let me re-phrase my question, if you were shooting for 50 yard accuracy, and couldn't use a new case, which once fired brass would you pick? Would you pick the same case for durability? If I had to pick 1 it would be Winchester. Quote Link to comment Share on other sites More sharing options...
twodownzero Posted January 3, 2012 Share Posted January 3, 2012 The best brass is the free brass that others leave behind. Quote Link to comment Share on other sites More sharing options...
noylj Posted January 4, 2012 Share Posted January 4, 2012 OP: Let me re-phrase my question, if you were shooting for 50 yard accuracy, and couldn't use a new case, which once fired brass would you pick? If you want accuracy at 50 yds, measure all your cases and separate all that are 0.750" or longer. These will, almost always, be the most accurate (minimize head space). Quote Link to comment Share on other sites More sharing options...
ckell101 Posted January 4, 2012 Share Posted January 4, 2012 I use Starline for new cases if I feel spendy, but what's the "best" brass that's available once fired? All my reloading is done to fit within my budget. So I am a major proponent of S&S's once shot brass. No particular headstamp assocation BUT it sure is affordable and cleans up nice. Quote Link to comment Share on other sites More sharing options...
k. easton Posted January 8, 2012 Share Posted January 8, 2012 for all the winchester fans out there. How long do the primer pockets stay tight? I load on a 1050 and it seems that if i ever have primers that don't seat it's a winchester case. Most all my brass is run thru a fullauto uzi or my millinium custom 6" 1320fps 124gr bullets. just curious Quote Link to comment Share on other sites More sharing options...
drysideshooter Posted January 8, 2012 Share Posted January 8, 2012 I no longer use picked up 9MM range brass, I have watched too many 9Major shooters who shoot it and leave it lay. They don't want it even if someelse picks it up for them. I have even done the same thing with a brand I no longer want to use because I only have 5-600 of. Next spring I have 1000 or more to give to a Production at the local club because I am switching to Open 40. I realize that 9mm major brass has a limited life, but I don't believe that thinking the brass is bad once it's been shot is the reason that many shooters leave it lay. I think it's because it's cheap and plentiful. I shot a Steel Challenge match yesterday and most of the 9mm shooters weren't picking up brass. For our 9's I've always had a preference for WIN brass. It's always been really consistent for me. Quote Link to comment Share on other sites More sharing options...
Pezco Posted January 8, 2012 Share Posted January 8, 2012 Free or cheap brass is best! Quote Link to comment Share on other sites More sharing options...
fike Posted January 8, 2012 Share Posted January 8, 2012 How big is the difference between "WIN" marked white box brass and the new stock "WINCHESTER" marked brass? Quote Link to comment Share on other sites More sharing options...
drysideshooter Posted January 8, 2012 Share Posted January 8, 2012 How big is the difference between "WIN" marked white box brass and the new stock "WINCHESTER" marked brass? I've used quite a few different Winchester headstamps and it seems to be extremely consistent from type to type, but especially so within the same headstamp. I've purchased quite a bit of once fired WIN brass and always been happy with it. Honestly for most types of shooting some of us probably obsess too much over brass. Quote Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 8, 2012 Share Posted January 8, 2012 Hello: Free brass is the best. The longest lasting is Mil spec brass with the crimped primer pocket. The alloy of the brass seems stronger to me. Winchester brass for 9mm major seems to last about 6 reloads. Some of the other brass is lasting a little longer. Blazer brass lasts about 4 reloads in major. I have not used Starline in 9mm. For minor loads I use any brass and have not had any problems at all. The Case Pro I think makes the brass last a little longer since it does not shorten the overall length like the sizing dies do. I would start collecting brass now. Thanks, Eric Quote Link to comment Share on other sites More sharing options...
.gif.53c483221c1b60d84bce93d42c5def5a.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.