rishii

I dump mine down the drain, where is diluted by the millions of gallons of sewage on its way to the treatment plant if you want to be sure it doesn’t get to the ground water you could pour it into kitty litter and let it dry out then toss it in the trash

What sights cut does it have, fixed or adjustable, a picture would help if it’s a fixed sight you will most likely need a taller front sight

Blue bullets, my old supercomp load pushed 115 to almost 1500 FPS with no leading i also swabbed my comp with kroil at the end of the day and let it sit until the next time I shot it. The kroil is a penetrating oil that would loosen the crud and blow it out the next time I shot

Back when I ran a supercomp opengun, I ran 115 blue bullets and 124 PD JHP with the same powder charge and didn’t adjust my dies , basically just just swap bullet types and load both loads made major, and most importantly for me was both loads recoiled the same, dot tracked the same and I could swap loads and not notice the difference

Same hole pattern the sig is slightly longer than the rts2

I’m using Kirkland dishwasher pods i bought a pack of the Frankfort Arsenal wet tumbling pod and when I got them they look familiar, then it hit me that they looked awfully like the Kirkland dishwasher pods that I bought before

I also wear 4e, Back when sports authority was still around, I used to buy Mizuno baseball shoes their regular shoes ran wide Now I’m using ASICS frequent trail runner, they come in 4e

The blade-tech signature series is pretty affordable to start, later if his interest continues you can upgrade him to something better https://blade-tech.com/collections/1911-holsters/products/signature-holster?variant=8169826287706

I gave up on trying to find common pistol and pcc load i settled on using a 135 gr blue bullet for pistol, and a 115 gr blue for pcc with the same powder charge

I have the old style powder measures and use both the springs and the fail safe rod, kinda like wearing both a belt and suspenders the fail safe rod only comes into play on the bottom of the stroke to ensure the powder bar is fully closed

To be fair, most red dots don’t survive his testing, including the SRO and the Romero 1pro with the steel shroud but he does have a consistent testing procedure and he comes across as sincere and honest on his opinion on various red dots he tested. Not of duty use

Add a disconnector stuck in the down position to the above, I polish the top edge of the middle finger of the sear spring where it rides on the disconnector also you removed the over travel screw, does the trigger have any over travel after the hammer falls, I had one that I removed the over travel screw and still had similar issues as you describe, I then realized the trigger shoe itself was hitting the mag catch and filed it down

On the old style powder measures there were springs that wrapped around the post and the PM body that returned the powder bar back into it.

I’ve been using the same setup for a few years, works well but the initial getting use to them was a bit

For a 1911 also look at the cr speed holster adjustable for many types of frames

My production, SS and CO load is 4.0 of 231 under a 135 gn blue bullet give me 135pf

My 308 rifle dies that I got direct from Dillon in the late 80’s are black

That’s impressive my V1 lasted 400 rounds before it died

I use the Lyman lube for pistol and it happens, I’ve never had it affect my ammo 1 hint about using it is to let it dry before loading, it’s not like the old fashion lube that you used wet My process is after inspection, wet tumble and dry, I immediately lube the cases and Let them sit, sometimes for days or weeks before I load them

what the others have said 15 yards is pushing it for a laser, the only time I used it beyond 10 yards was when I forgot to turn on my dot

I used a dremel with a sanding drum, took it down below flush to the comp until I saw the outline of the pin, then flipped it over and tapped with a hammer until the pin fell out

The Romero 1pro is also much brighter than a rts2

The height is a tiny bit smaller than a rts2, but it’s a lot wider, I direct mounted mine to my legion and once I figure out I suck with a striker gun I switched to a old 5906 with dovetail mount. I thought the height difference would be a big deal, but it’s wasn’t