CDRODA396 Posted February 18, 2007 Share Posted February 18, 2007 (edited) Short time lurker, first time poster. Dawson Edge in 45 acp. Got her a couple of weeks ago. Nice blaster jackruss...who did that grip, the black on blue against the chrome is really catchy! And TCK, nice blaster as well....is that standard blueing or another black finish on yours...I also really like the chrome barrel against the black slide.... So many options so few guns!!!! Keep posting them!!! Edited February 18, 2007 by CDRODA396 Link to comment Share on other sites More sharing options...
TCK Posted February 18, 2007 Share Posted February 18, 2007 Short time lurker, first time poster. Dawson Edge in 45 acp. Got her a couple of weeks ago. Nice blaster jackruss...who did that grip, the black on blue against the chrome is really catchy! And TCK, nice blaster as well....is that standard blueing or another black finish on yours...I also really like the chrome barrel against the black slide.... So many options so few guns!!!! Keep posting them!!! I didnt do it, its a deep bluing that Dan put on it. Link to comment Share on other sites More sharing options...
turbocomp38s Posted February 19, 2007 Share Posted February 19, 2007 Here is mine, Got it today. Picture is not that clear. I am using my mini DV for pictures. Better pics to on the way. My pictures don't do justice to Benny's work. Need to get some clear pics of the fat free. Have seen it today and nice blaster. Will try shooting this weekend. Link to comment Share on other sites More sharing options...
jackruss Posted February 22, 2007 Share Posted February 22, 2007 Short time lurker, first time poster. Dawson Edge in 45 acp. Got her a couple of weeks ago. Nice blaster jackruss...who did that grip, the black on blue against the chrome is really catchy! And TCK, nice blaster as well....is that standard blueing or another black finish on yours...I also really like the chrome barrel against the black slide.... So many options so few guns!!!! Keep posting them!!! I didnt do it, its a deep bluing that Dan put on it. I did the grip myself. Took a dremel drum sander and took off all the checkering and stippling. Went to Ace hardware and got some 3M brand step tape for $2.99 a foot. Clean plastic well with brake cleaner. Made a couple of patterns with heavy paper first. After a trial fit made the final panels. One on each side and a front wrap around piece. The hardest part was trimming the holes for the grip screws. Nice sharp exacto knife does the trick. The 3M tape is the stuff to get. Leaves absolutely no grit on your hands. Non existent wear and sticky as hell. Catapillar uses it on their steps for construction equipment. Link to comment Share on other sites More sharing options...
newshooter Posted March 1, 2007 Share Posted March 1, 2007 (edited) heres my limited Edited March 3, 2007 by newshooter Link to comment Share on other sites More sharing options...
hitman_usmc Posted March 7, 2007 Share Posted March 7, 2007 Plain and simple so far. Link to comment Share on other sites More sharing options...
sv45 Posted March 22, 2007 Share Posted March 22, 2007 My svi pistols. Link to comment Share on other sites More sharing options...
Brazos SC Shooter Posted March 22, 2007 Share Posted March 22, 2007 Impatiently waiting on this new blaster to show up. There are only 104 days, 23 hours, 39 minutes and 16,15,14,13 seconds until it gets here..... Only 85 days left. I added 4 tuned mags from Bob to the order. It is killing me having to wait on this gun. There are 25 days left. I will get a call when it goes to for chrome. It will only be 10 days or so after that. Link to comment Share on other sites More sharing options...
STInky Posted March 22, 2007 Share Posted March 22, 2007 It may look like everyone elses......but I know the differences !!!!! p.s. Had the grip stippled since this photo was taken.....great for hot, summer days at the range. Link to comment Share on other sites More sharing options...
want2race Posted March 29, 2007 Share Posted March 29, 2007 I'm sure convex triggers have been done before but I haven't see any pictures so far. I started mild to see if I liked it. I do. Most who try it, hate it at first. It's a very different feel. It grows on you with trigger time. I'm either starting a fad, or bringing one back! First 2011. Started with one as heavy as I could get it. Over the next year I plan to whittle it down with slide cuts, bushing barrel etc. Link to comment Share on other sites More sharing options...
billdncn Posted March 31, 2007 Share Posted March 31, 2007 Glock on dudes Link to comment Share on other sites More sharing options...
steel1212 Posted March 31, 2007 Share Posted March 31, 2007 My new limited gun. Now I just have to learn to shoot it like I shot my XD!! Link to comment Share on other sites More sharing options...
Sestock Posted April 11, 2007 Share Posted April 11, 2007 Here is my well used Dawson. Link to comment Share on other sites More sharing options...
Julien Boit Posted April 23, 2007 Share Posted April 23, 2007 My latest blaster. my postman showed up this morning with the second part, and Ta-da : The differences with the previous are : ITI rail Cut, 40 LPI lines on top of the slide(Vs 20), and Xcelerator long cuts at the rear of the slide. Link to comment Share on other sites More sharing options...
jimbob_texas Posted April 29, 2007 Share Posted April 29, 2007 Mine! Link to comment Share on other sites More sharing options...
ong45 Posted April 30, 2007 Share Posted April 30, 2007 (edited) Limcat, tungsten sleeved barrel. 3 sided top. Sorry for the crappy pic. Edited April 30, 2007 by ong45 Link to comment Share on other sites More sharing options...
jmallard Posted April 30, 2007 Share Posted April 30, 2007 Here's a link to mine. Jerry Link to comment Share on other sites More sharing options...
darrenk75b Posted April 30, 2007 Share Posted April 30, 2007 My latest blaster.my postman showed up this morning with the second part, and Ta-da : The differences with the previous are : ITI rail Cut, 40 LPI lines on top of the slide(Vs 20), and Xcelerator long cuts at the rear of the slide. That's a sexy blaster. I'm envious. Link to comment Share on other sites More sharing options...
Brazos SC Shooter Posted May 1, 2007 Share Posted May 1, 2007 I will know what mine looks like tomorrow. Ingi from Brazos called today to tell me my Brazos Limited Custom will be here tomorrow afternoon. I loaded up 400 rounds to get it broken in good tomorrow. I will post pictures and a range report tomorrow evening. Link to comment Share on other sites More sharing options...
Brazos SC Shooter Posted May 2, 2007 Share Posted May 2, 2007 I am so bummed. I got hung up in a long meeting today and was not able to make it to the range. I did pick up the gun but didn't get to shoot it. It is killing me. Tomorrow = llllllllooooooooooooooonnnnnnnnnnnnnnnnggggggggggggggggg lunch. Link to comment Share on other sites More sharing options...
PistolPete Posted May 2, 2007 Share Posted May 2, 2007 You'll absolutely love the Brazos gun. I have an open gun from him and it rocks. I just put in an order for a limited gun as well. You'll need to post pics ASAP so we can all drewl. Mine won't be here until November though. Pete Link to comment Share on other sites More sharing options...
Neomet Posted May 2, 2007 Share Posted May 2, 2007 And now for something a little different....... Link to comment Share on other sites More sharing options...
TCK Posted May 2, 2007 Share Posted May 2, 2007 And now for something a little different....... Im telling Robo-Cop that you stole his gun! Link to comment Share on other sites More sharing options...
Neomet Posted May 2, 2007 Share Posted May 2, 2007 [Im telling Robo-Cop that you stole his gun! Nah, his was the 9mm version. Link to comment Share on other sites More sharing options...
Brazos SC Shooter Posted May 3, 2007 Share Posted May 3, 2007 Finally some pictures to post. 1st - gun and mags 2nd - my stippling job on the grip Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now