Sarge Posted March 11, 2020 Share Posted March 11, 2020 1 hour ago, EEH said: Iβll take that, but you posted about primers on Saturday. How long does it take you to make a decision? And heβs not likely to buy the whole skid. Link to comment Share on other sites More sharing options...
MadBomber Posted March 11, 2020 Share Posted March 11, 2020 On 3/7/2020 at 5:52 PM, looking4reloadingdeals said: What would be the purpose of using rifle primers in non major loaded pistol loads? Only needing to stock one kind of primer? Sent from my iPhone using Tapatalk That's pretty much it. Link to comment Share on other sites More sharing options...
warpspeed Posted March 11, 2020 Share Posted March 11, 2020 not trying to talk you out of them, but do a search on "breach face erosion" and you will find some people have issues with rifle primers in pistol loads. Β Β Link to comment Share on other sites More sharing options...
looking4reloadingdeals Posted March 12, 2020 Share Posted March 12, 2020 not trying to talk you out of them, but do a search on "breach face erosion" and you will find some people have issues with rifle primers in pistol loads. Β Β I had this problem with some really old Tula pistol primers in my Glock 34. In the end it cost me $250 for Glock to replace my entire gun (since it wasnβt made in the US they didnβt have replace parts they could send me or something and needed to replace the whole thing). After that I have always stuck to what is suggested and reputable brands. Ie. I only run CCI any more. The $80 I saved by buying 10k Tula SPP ended up costing me $250, 5 hours at the bench pulling 1500 rounds to remove primers, and in the end about 2-3k lost primers. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 12, 2020 Author Share Posted March 12, 2020 17 hours ago, EEH said: Iβll take that, but you posted about primers on Saturday. How long does it take you to make a decision? last time I found some in Columbia me and a buddy of mine bought 35,000. I mean I get paid friday....so after thatΒ Link to comment Share on other sites More sharing options...
ar15rick Posted March 13, 2020 Share Posted March 13, 2020 The CCI Small rifle primers are the only ones I have used with my 38 SC and my 9mm Major.Β They are great and I have never had any issues with them. My 38 SC is shooting at 1500FPS since I am using 115 gr bullets with 12.0 grains of AA#7.Β Β Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 13, 2020 Author Share Posted March 13, 2020 9 hours ago, ar15rick said: The CCI Small rifle primers are the only ones I have used with my 38 SC and my 9mm Major.Β They are great and I have never had any issues with them. My 38 SC is shooting at 1500FPS since I am using 115 gr bullets with 12.0 grains of AA#7.Β Β can you post a video of the recoil?Β I'd like to see 1500 fps in action Β Link to comment Share on other sites More sharing options...
Bwillis Posted March 13, 2020 Share Posted March 13, 2020 this was 8.5gn hs6 115gn jhp v2 everglade small pistol primer #500 1450fps and 167pf Β switching to #400 primer got me in the 1500-1520fps range with the same load Link to comment Share on other sites More sharing options...
ar15rick Posted March 13, 2020 Share Posted March 13, 2020 can you post a video of the recoil?Β I'd like to see 1500 fps in action Β Here is a video of me shooting a match with that combination. This is on an Akai V8.Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 13, 2020 Author Share Posted March 13, 2020 3 hours ago, Bwillis said: this was 8.5gn hs6 115gn jhp v2 everglade small pistol primer #500 1450fps and 167pf Β switching to #400 primer got me in the 1500-1520fps range with the same load How many poppel holes and how many holes In the comp? Link to comment Share on other sites More sharing options...
Balakay Posted March 13, 2020 Share Posted March 13, 2020 47 minutes ago, ar15rick said: Here is a video of me shooting a match with that combination. This is on an Akai V8. Β Β Sent from my SM-N960U using Tapatalk Β Β Either you went full auto or have the fastest splits i've ever heard Link to comment Share on other sites More sharing options...
ar15rick Posted March 13, 2020 Share Posted March 13, 2020 Either you went full auto or have the fastest splits i've ever heardLol no full auto it was my finger. They were close up targets so I just let it rip. It also helps when I have 1.5lbs trigger. Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
Bwillis Posted March 13, 2020 Share Posted March 13, 2020 1 hour ago, AverageJoeShooting said: How many poppel holes and how many holes In the comp? 2 3/16 and 2 itβs aΒ sv compΒ Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 30, 2020 Author Share Posted March 30, 2020 So i bought 9k of what i thought were CCI small rifle. put them in the bag, brought them home and put them in the flammables cabinet without looking at them.Β I finally ran out of primers so i go to grab my cci small rifleΒ today, and it turns out they are cci small rifleΒ magnum.Β Β Β My question is will they still work with 38 sc?Β Β Β Link to comment Share on other sites More sharing options...
AHI Posted March 30, 2020 Share Posted March 30, 2020 yes they will work. you may wont to drop your powder charge and work back up . Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 30, 2020 Author Share Posted March 30, 2020 Just now, AHI said: yes they will work. you may wont to drop your powder charge and work back up . Do the magnums add that much to the velocity? Link to comment Share on other sites More sharing options...
AHI Posted March 30, 2020 Share Posted March 30, 2020 (edited) they could but probably not depends on what powder you use etc. Edited March 30, 2020 by AHI Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 30, 2020 Author Share Posted March 30, 2020 2 minutes ago, AHI said: they could but probably not depends on what powder you use etc. AA7 Link to comment Share on other sites More sharing options...
Chillywig Posted March 31, 2020 Share Posted March 31, 2020 My load development testing never has shown a noticeable velocity difference between magnum and standard primers.Β Β Β Link to comment Share on other sites More sharing options...
Steve RA Posted March 31, 2020 Share Posted March 31, 2020 I use Tula small rifleΒ magnum primers in 9mm, .45ACP and .223/5.56 and have had no problems with them.Β I bought a very large amount years ago, they aren't available now.Β Never had a problem with ignition but only use them in 1911s and the AR.Β I use Australian Clays in the 9mm and .45 (had a large amount of it also - not available now).Β Only problem is if you use something that produces light primer strikes, best thing is just to try a few and see if they work for you. Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted March 31, 2020 Author Share Posted March 31, 2020 5 hours ago, Steve RA said: I use Tula small rifleΒ magnum primers in 9mm, .45ACP and .223/5.56 and have had no problems with them.Β I bought a very large amount years ago, they aren't available now.Β Never had a problem with ignition but only use them in 1911s and the AR.Β I use Australian Clays in the 9mm and .45 (had a large amount of it also - not available now).Β Only problem is if you use something that produces light primer strikes, best thing is just to try a few and see if they work for you. im using it for a 38sc racegun Link to comment Share on other sites More sharing options...
kamber Posted April 3, 2020 Share Posted April 3, 2020 On 3/30/2020 at 4:41 PM, AverageJoeShooting said: So i bought 9k of what i thought were CCI small rifle. put them in the bag, brought them home and put them in the flammables cabinet without looking at them.Β I finally ran out of primers so i go to grab my cci small rifleΒ today, and it turns out they are cci small rifleΒ magnum.Β Β Β My question is will they still work with 38 sc?Β Β Β Curious as to how much you got them for per thousand? Sent you a PM in case you'd rather not share publicly. Link to comment Share on other sites More sharing options...
falconpilot Posted April 4, 2020 Share Posted April 4, 2020 Been shooting Tula, wolf, CCI, small regular and mag primers for years in my pistols, especially my open gun. Never noticed any breech face issues. Back before Obama was elected, buddy and I bought about 100K Tula/Wolfs when they were $19 per thousand..just about out now..which I could still get them.. Link to comment Share on other sites More sharing options...
AverageJoeShooting Posted April 4, 2020 Author Share Posted April 4, 2020 58 minutes ago, falconpilot said: Been shooting Tula, wolf, CCI, small regular and mag primers for years in my pistols, especially my open gun. Never noticed any breech face issues. Back before Obama was elected, buddy and I bought about 100K Tula/Wolfs when they were $19 per thousand..just about out now..which I could still get them.. Anyone happen to have a starting load for 38sc open with AA7 with cci 450, small rifleΒ magnum? Link to comment Share on other sites More sharing options...
tomjerry1 Posted April 4, 2020 Share Posted April 4, 2020 I shoot 38SC Open, load 10.2 gr AA7, Hornady 125 HAP, CCI SPP, Star Line, approx. 1385fps. My personal experience, I didn't see a big difference between SPP or SRP, but if you start about 9 gr, should be a good starting point. I know a lot of folks use SRP, I just don't see the advantages, unless it's all you have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now