vgdvc Posted December 21, 2018 Author Share Posted December 21, 2018 40 minutes ago, Hi-Power Jack said: Even better if you spray your comp each time before you shoot them, and then fire some JHP's thru the gun to end your session - or just scrub the comp. ....and what is a good process to scrub/clean the comp,thanks Link to comment Share on other sites More sharing options...
GrumpyOne Posted December 21, 2018 Share Posted December 21, 2018 2 hours ago, Hi-Power Jack said: Shouldn't be much of a problem - it takes thousands of "exposed bases" to lead up your comp. Even better if you spray your comp each time before you shoot them, and then fire some JHP's thru the gun to end your session - or just scrub the comp. Jack, I have had the comp on my 40 MINOR gun lead up (shooting non coated lead bullets) after just 500 rounds. It would lead up bad enough that the baffles would be full and the bullets would start hitting the lead, affecting accuracy. And by minor, I mean minor...3.2 grains of Clays with a 155 grain lead bullet. Link to comment Share on other sites More sharing options...
Jfitz427 Posted December 21, 2018 Share Posted December 21, 2018 Berry’s makes those thick plated bullets rated up to 1500fps. Although I’ve ran regular Berry’s plated in my open gun before. Accuracy was fine. For the most part I’ve been running blue bullets, polymer coated. I’ve put around 2000 though it and haven’t cleaned the comp at all, and it doesn’t look like it needs it either. With that said, I may switch to a jacketed bullet when I finish up all the blues I have. Link to comment Share on other sites More sharing options...
chevrofreak Posted December 21, 2018 Share Posted December 21, 2018 2 hours ago, Jfitz427 said: Berry’s makes those thick plated bullets rated up to 1500fps. Although I’ve ran regular Berry’s plated in my open gun before. Accuracy was fine. For the most part I’ve been running blue bullets, polymer coated. I’ve put around 2000 though it and haven’t cleaned the comp at all, and it doesn’t look like it needs it either. With that said, I may switch to a jacketed bullet when I finish up all the blues I have. I have run the regular Berry's 115gr plated bullets up over 1500fps out of my open guns, surprisingly with no signs of the bullets coming apart Link to comment Share on other sites More sharing options...
IDAHOAASHOOTER Posted December 22, 2018 Share Posted December 22, 2018 On 12/20/2018 at 6:57 PM, Hi-Power Jack said: ^^^^^^^^^^ Spend a little more, and get PD's - they're the best buy right now. ^^^^^^^^^^^ I had some shipping issues with PD, completely the USPS at fault mind you.... But 3 weeks later I got my first batch and loaded some up. They are really good bullets. 178$ for 2k shipped isn't a bad deal. It's the equivalent to what about 44$ a box of 500. Link to comment Share on other sites More sharing options...
APL-G35 Posted December 24, 2018 Share Posted December 24, 2018 Rainier Bullets has a double plated design for this purpose. There is quite a few open guys locally that are using them. Link to comment Share on other sites More sharing options...
Acsr Posted December 24, 2018 Share Posted December 24, 2018 Not sure why you would want to shoot plated bullets of any kind when jacketed bullets from RMR are not any more expensive, they run sales regularly and get a hold of asponsored shooter and save some more money with a discount code Link to comment Share on other sites More sharing options...
NateTSU Posted December 24, 2018 Share Posted December 24, 2018 I had a thread going for my pcc load with the intent of using plated. After reading and running the numbers Precision Delta makes the most sense for me. Cheaper than a plated bullet and higher quality. Follow them on social media to see some of their special deals. Link to comment Share on other sites More sharing options...
vgdvc Posted December 24, 2018 Author Share Posted December 24, 2018 38 minutes ago, Acsr said: Not sure why you would want to shoot plated bullets of any kind when jacketed bullets from RMR are not any more expensive, they run sales regularly and get a hold of asponsored shooter and save some more money with a discount code After seeing the poor performance I had at 1360 fps with them I don't. Since I usually shoot Limited .40 that's what I happened to have in my reloading room so I put some loads together . Don't want to make a habit of shooting exposed based FMJ so now I have 2k Precision Delta 124 jhp on their way..... Link to comment Share on other sites More sharing options...
Acsr Posted December 24, 2018 Share Posted December 24, 2018 Depending on quantity the RMR are the Best price on a jacketed h.p. around I've shoot MG E.G. PD, found RMR won wad a touch late to the jacketed game, but not searching for the perfect bullet any longer, RMR is legit and priced right. Link to comment Share on other sites More sharing options...
Foxbat Posted December 26, 2018 Share Posted December 26, 2018 On 12/20/2018 at 7:51 PM, B_RAD said: I use Precision Delta. Best price. Great quality and great people. Yes to all that, and they USED to have best price, but last time I bought EverGlades bullets - with Black Friday discount there were cheaper, and quality-wise at least as good. Link to comment Share on other sites More sharing options...
B_RAD Posted December 26, 2018 Share Posted December 26, 2018 (edited) 1 hour ago, Foxbat said: Yes to all that, and they USED to have best price, but last time I bought EverGlades bullets - with Black Friday discount there were cheaper, and quality-wise at least as good. I've noticed something when it comes to bullets choices. Everyone wants to make a case for their manufacturer of choice. Then, they want to apply BF discounts to thier purchase but forget the same BF discoint was probably available from every manufacturer. Essentially, keeping the price difference between brand X and brand Z the same. Edited December 26, 2018 by B_RAD Link to comment Share on other sites More sharing options...
Foxbat Posted December 26, 2018 Share Posted December 26, 2018 To my knowledge there was no BF discount on JHP bullets from Precision - I looked. So the price comparison is fair. Link to comment Share on other sites More sharing options...
B_RAD Posted December 26, 2018 Share Posted December 26, 2018 (edited) 59 minutes ago, Foxbat said: To my knowledge there was no BF discount on JHP bullets from Precision - I looked. So the price comparison is fair. They did on BF. 10%. Edited December 26, 2018 by B_RAD Link to comment Share on other sites More sharing options...
jnr88 Posted December 27, 2018 Share Posted December 27, 2018 I'm always amazed by these threads. You can't shoot plated any cheaper than jacketed. What reason could there be to justify plated ? Link to comment Share on other sites More sharing options...
MemphisMechanic Posted December 27, 2018 Share Posted December 27, 2018 (edited) 5 hours ago, Foxbat said: To my knowledge there was no BF discount on JHP bullets from Precision - I looked. So the price comparison is fair. These days you need to follow your desired bulletmaker on Instagram or Facebook. That’s where I got in on Everglades and BlueBullets both being 10% or more off. I didn’t see the sale on either shop’s website. Edited December 27, 2018 by MemphisMechanic Link to comment Share on other sites More sharing options...
tyman1876 Posted December 27, 2018 Share Posted December 27, 2018 These days you need to follow your desired bulletmaker on Instagram or Facebook. That’s where I got in on Everglades and BlueBullets both being 10% or more off. I didn’t see the sale on either shop’s website. Sign up for Everglades email list as well. They don’t overdue it with the emails but if they have a deal going on you’ll know about it. Link to comment Share on other sites More sharing options...
Foxbat Posted December 27, 2018 Share Posted December 27, 2018 That's how I got my information, plus they were 15% off on Monday. They do this every year, a friend tipped me. I have done a lot of business with Precision, but they apparently don't keep mailing list. As result - I looked there, but did not see it... I saw some other bullets, but not 124gr JHP. If their goal was to make it hard to fine - it is their business, but they surely succeeded! Link to comment Share on other sites More sharing options...
taxil343 Posted December 27, 2018 Share Posted December 27, 2018 On 12/20/2018 at 10:27 PM, vgdvc said: Just ordered 2k of 124 jhp. Bad news is they're closed till January 2nd! I'm going a little Cabin Fever crazy. Took awhile for the pistol to get here, powder should be here in about 4 days but all I have to load and run with is these plated bullets and some 124 jacketed round nose so they have an exposed base. I'm figuring the exposed base is a No-No for even couple hundred rounds? You made a great choice going with Precision Delta, awesome bullets and even better people. Just be patient and wait for them to come in. I filled a comp up on a 9 minor steel gun with less than 2k rounds of coated lead (always wiped it down with FP-10 prior to shooting and ended each session with 5 JHPs). I spent about 4 hours cleaning it all out and will never make that mistake again. I have three open major guns with 4-18k of PD JHPs through them and have never cleaned any of the comps. Link to comment Share on other sites More sharing options...
taxil343 Posted December 27, 2018 Share Posted December 27, 2018 On 12/20/2018 at 10:27 PM, vgdvc said: Just ordered 2k of 124 jhp. Bad news is they're closed till January 2nd! I'm going a little Cabin Fever crazy. Took awhile for the pistol to get here, powder should be here in about 4 days but all I have to load and run with is these plated bullets and some 124 jacketed round nose so they have an exposed base. I'm figuring the exposed base is a No-No for even couple hundred rounds? You made a great choice going with Precision Delta, awesome bullets and even better people. Just be patient and wait for them to come in. I filled a comp up on a 9 minor steel gun with less than 2k rounds of coated lead (always wiped it down with FP-10 prior to shooting and ended each session with 5 JHPs). I spent about 4 hours cleaning it all out and will never make that mistake again. I have three open major guns with 4-18k of PD JHPs through them and have never cleaned any of the comps. Link to comment Share on other sites More sharing options...
vgdvc Posted December 27, 2018 Author Share Posted December 27, 2018 2 hours ago, taxil343 said: You made a great choice going with Precision Delta, awesome bullets and even better people. Just be patient and wait for them to come in. I filled a comp up on a 9 minor steel gun with less than 2k rounds of coated lead (always wiped it down with FP-10 prior to shooting and ended each session with 5 JHPs). I spent about 4 hours cleaning it all out and will never make that mistake again. I have three open major guns with 4-18k of PD JHPs through them and have never cleaned any of the comps. Yes I have been happy with their products in the past. I used them years back when I was able to get 180 grain 40 FMJ for about $58 per thousand. Then I moved to plated,then coated. It wasn't an issue shooting Limited but this is a new game with the Open gun... Link to comment Share on other sites More sharing options...
muncie21 Posted December 27, 2018 Share Posted December 27, 2018 Taxi, tell us again how you feel about PDs For the record, I like them for open also. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted December 27, 2018 Share Posted December 27, 2018 8 hours ago, Foxbat said: ... I looked there, but did not see it... I saw some other bullets, but not 124gr JHP. If their goal was to make it hard to find - it is their business, but they surely succeeded! Steven conceeded in a discussion around BF time period that he relies a lot on the mailing list. Mant of us loathe getting emails from people who aren’t our friends and family. We all would much rather see it here, facebook, and instagram. @Ssanders224 is going to do the social media thing next year at in addition to their email list. I have 8k new bullets from Blue and Everglades that likely would have been PD’s instead... if I’d caught their sale on instagram while trolling for deals on black friday. Link to comment Share on other sites More sharing options...
Foxbat Posted December 27, 2018 Share Posted December 27, 2018 I don't like "social" media and don't use it, but actually there were emails from PD, just no 124gr bullets in them. I have their BF email. Another one was on Monday. All wrong bullets. What can I say? Advertising sells. Link to comment Share on other sites More sharing options...
vgdvc Posted December 27, 2018 Author Share Posted December 27, 2018 58 minutes ago, Foxbat said: I don't like "social" media and don't use it, but actually there were emails from PD, just no 124gr bullets in them. I have their BF email. Another one was on Monday. All wrong bullets. What can I say? Advertising sells. If you don't mind me asking what is the BF email, what is beneficial about it and how does one sign up for it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now