MemphisMechanic Posted August 26, 2018 Share Posted August 26, 2018 @CTJer relax and shoot it like any other stage. That’s your problem right there. Link to comment Share on other sites More sharing options...
CTJer Posted August 26, 2018 Share Posted August 26, 2018 24 minutes ago, MemphisMechanic said: @CTJer relax and shoot it like any other stage. That’s your problem right there. Yeah, It's a mental block for sure. Link to comment Share on other sites More sharing options...
quliming Posted September 18, 2018 Share Posted September 18, 2018 At 1 sec, you probably don't have much time if any to aim. You draw and fire, but you observe the sights and call your shots. Link to comment Share on other sites More sharing options...
blackfatbob Posted September 20, 2018 Share Posted September 20, 2018 On 4/13/2018 at 4:48 AM, rowdyb said: steel challenge is a surrender draw. change your hand and arm position so that you can just rotate your forearms down at the elbow to the gun versus rotating the whole arm down from the shoulder. and most my steel challenge draws are 1.3 btw. Good suggestion here. Being 5'7" with a relatively short torso, this will be an entirely different set of mechanics for me. Link to comment Share on other sites More sharing options...
Shadyscott999 Posted September 20, 2018 Share Posted September 20, 2018 people saying draws don't matter are incorrect. Most of the top guys will always draw well under second to a 7 yd target in matches. My normal draw to that is about an .80. Being an M or GM is about doing everything faster. Stop limiting yourself by saying "I don't need to get better at this" In a hypothetical with 10 stages in a match. If I hit .80 on every draw and you draw at 1.5 because that is all you "need" at the end of the day I am 7 seconds faster on the match than you, all other things being equal. If you want to win, it all matters. Draws, splits, transitions, entries, exits, reloads. Perfect it all. Link to comment Share on other sites More sharing options...
tanks Posted September 21, 2018 Share Posted September 21, 2018 23 hours ago, Shadyscott999 said: ... In a hypothetical with 10 stages in a match. If I hit .80 on every draw and you draw at 1.5 because that is all you "need" at the end of the day I am 7 seconds faster on the match than you, all other things being equal. If you want to win, it all matters. Draws, splits, transitions, entries, exits, reloads. Perfect it all. In a hypothetical 10 stage match how many stand and draw stages would there be? Other than a classifier stage I have yet to see a stage where one does not move while drawing. I agree that all the skills have to be there. However, in a match I would think one would scale down to a pace that is consistent 10 out of 10 within their abilities. If one is getting A hits out of 1.20 draw consistently and either having to adjust their grip or get Cs ,Ds or mikes at 1.0 draw I submit a slightly slower draw is more bang for the buck. Link to comment Share on other sites More sharing options...
wtturn Posted September 21, 2018 Share Posted September 21, 2018 2 hours ago, tanks said: In a hypothetical 10 stage match how many stand and draw stages would there be? Other than a classifier stage I have yet to see a stage where one does not move while drawing. I agree that all the skills have to be there. However, in a match I would think one would scale down to a pace that is consistent 10 out of 10 within their abilities. If one is getting A hits out of 1.20 draw consistently and either having to adjust their grip or get Cs ,Ds or mikes at 1.0 draw I submit a slightly slower draw is more bang for the buck. You're missing his point entirely. Not to mention a fast draw is typically a good analogue for how proficient you are in your gunhandling tasks as a whole. Link to comment Share on other sites More sharing options...
Dr. Phil Posted September 21, 2018 Share Posted September 21, 2018 Since the OP was speaking about Steel Challenge, ask yourself how much differential would there be between (his) average 1.7 draw and a, say, 1.2 draw - which would be a really good average for all 8 stages - over an entire match? 39 draws @.5 (roughly) ea. Seems like 19.5 seconds? Yeah, that would be worth a little work... PS Mine run around 1.25 to 1.4 on most stages. Roundabout and (of course) S&H tend to be a little quicker. Link to comment Share on other sites More sharing options...
StuckinMS Posted September 22, 2018 Share Posted September 22, 2018 8 hours ago, tanks said: In a hypothetical 10 stage match how many stand and draw stages would there be? Other than a classifier stage I have yet to see a stage where one does not move while drawing. I agree that all the skills have to be there. However, in a match I would think one would scale down to a pace that is consistent 10 out of 10 within their abilities. If one is getting A hits out of 1.20 draw consistently and either having to adjust their grip or get Cs ,Ds or mikes at 1.0 draw I submit a slightly slower draw is more bang for the buck. At area 6 this year 80% of the stages were start anywhere in the fault lines. Lots of draws and shots from the starting position. If you set yourself up right, then multiple targets were available also. Getting your eyes on the sights fast from the draw will also help you get your eyes on the sights fast when coming into a shooting position which is a draw, just not from the holster. Link to comment Share on other sites More sharing options...
mike cyrwus Posted September 22, 2018 Share Posted September 22, 2018 Economy of motion and consistency. Dryfiring at a mirror is a way I learned and practiced a fast draw. Also, think of the start of your draw stroke as a “twitch” and practice twitching your hand onto the gun more than any other part of the draw stroke, except maybe the press out Link to comment Share on other sites More sharing options...
xdf3 Posted September 24, 2018 Share Posted September 24, 2018 I'm not a grandmaster but I'm 100% sure of a thing : if you never try to go past your limits you won't be faster. 10000 draws won't be enough to do it faster. Try forcing it to be fast at some point Link to comment Share on other sites More sharing options...
stick Posted September 24, 2018 Share Posted September 24, 2018 Your draw speed will be faster or slower depending on the stage. For example, your draw will be slower on 5 to go since you are drawing to a 10" plate 30' away. obviously it will take longer to get the sights on target since the plate is smaller. Smoke and Hope should be a very fast draw (one second) because you are drawing to a 18x24 plate 7 yards away. It's hard to say your draw has to be (x) it will be dependent on the stage. If you are looking to improve in steel challenge, you need to dry fire the stages. Work on pyramid training and practice. Here's my spreadsheet for pyramid training. You should be looking at your overall times on the stage and determining your times. Then use the pyramid training to break down the stage to determine your weakness. The times I have listed are for me shooting PCC. I used the shootsteelbanners.com steel challenge banners and dry fire 5 days a week to make GM in steel challenge in 8 months. 11 8.5 7.5 12 9.5 10.5 10.5 8.5 Five To Go Showdown Smoke & Hope Outer Limits Accelerator Pendulum Speed Option Roundabout DRAW 0.75 0.75 0.60 0.80 0.75 0.75 0.75 0.75 TRANSITION 1 0.5 0.33 0.22 0.35 0.28 0.40 0.38 0.33 TRANSITION 2 0.5 0.35 0.40 2.05 0.45 0.45 0.50 0.35 TRANSITION 3 0.5 0.35 0.22 0.35 0.45 0.45 0.50 0.35 TRANSITION 4 0.5 0.35 0.45 0.45 0.45 0.55 0.50 0.35 TOTAL 2.75 2.13 1.89 4.00 2.38 2.60 2.63 2.13 PLATES 1-2 1.25 1.08 0.82 1.15 1.03 1.15 1.13 1.08 PLATES 1-2-3 1.75 1.43 1.22 3.20 1.48 1.60 1.63 1.43 PLATES 1-2-3-4 2.25 1.78 1.44 3.55 1.93 2.05 2.13 1.78 PLATES 1-2-3-4-STOP 2.75 2.13 1.89 4.00 2.38 2.60 2.63 2.13 100% 11 8.5 7.5 12 9.5 10.5 10.5 8.5 PER STRING 2.75 2.13 1.88 4.00 2.38 2.63 2.63 2.13 My Current % 104.66 103.53 93.52 87.77 91.70 97.40 91.94 108.56 Link to comment Share on other sites More sharing options...
jrdoran Posted September 25, 2018 Share Posted September 25, 2018 ^^^ Great post and alot to learn from here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now