sweetback Posted March 14, 2017 Share Posted March 14, 2017 How about starting a CARRY OPTICS only Thread? Link to comment Share on other sites More sharing options...
sweetback Posted March 14, 2017 Author Share Posted March 14, 2017 (edited) Using this CO for double duty. USPSA & IDPA. 140mm mag for USPSA 23+1. And when I shoot IDPA I'll switch to 10 Rd. division capacity. Same ammo, belt, and holster. Both are Provisional and I'm going to have FUN with it. Weight with empty Taylor Freelance brass ext. is 31.8 ozs.G17/Gen 4 with large beaver tail. J POINT optic i had laying around 8moa. Sent from my XT1080 using Tapatalk Edited March 14, 2017 by sweetback Link to comment Share on other sites More sharing options...
Rugerglock Posted March 14, 2017 Share Posted March 14, 2017 Nice setup. I will running a Glock 19 with a dovetail mounted trijicon rmr. Link to comment Share on other sites More sharing options...
ClangClang Posted March 14, 2017 Share Posted March 14, 2017 I've been shooting this guy at local Outlaw matches. I take off the light for matches, but it usually stays on. Link to comment Share on other sites More sharing options...
BritinUSA Posted March 14, 2017 Share Posted March 14, 2017 Link to comment Share on other sites More sharing options...
mreed911 Posted March 14, 2017 Share Posted March 14, 2017 Nothing special with my setup: G17 MOS + Burris FF3 + ETS 140mm mags. Put a little color on the floorplates (the yellow are my 9mm ones). Not sure if I want to disassemble the G17 to add any color to the parts since it won't make me shoot any better. I have one other spot of grip tape on the other side of the frame where my finger indexes for draw/reloads. Link to comment Share on other sites More sharing options...
PatJones Posted March 15, 2017 Share Posted March 15, 2017 Ain't you guys got your own sub-forum yet? Link to comment Share on other sites More sharing options...
GregJ Posted March 15, 2017 Share Posted March 15, 2017 This is what I will be using for CO. CZ Phantom, Springer plate, and Burris FF3. Need some trigger work before I jump into the CO pool. Link to comment Share on other sites More sharing options...
9x45 Posted March 15, 2017 Share Posted March 15, 2017 22 hours ago, sweetback said: Using this CO for double duty. USPSA & IDPA. 140mm mag for USPSA 23+1. And when I shoot IDPA I'll switch to 10 Rd. division capacity. Same ammo, belt, and holster. Both are Provisional and I'm going to have FUN with it. Weight with empty Taylor Freelance brass ext. is 31.8 ozs.G17/Gen 4 with large beaver tail. J POINT optic i had laying around 8moa. It's not a Division in IDPA yet, only allowed by the MD. You could shoot an USPSA Open Division Major 9 instead of CO. 8.2.21 Specialty Divisions (SPD) A. IDPA encourages shooters to practice their gun handling skills with commonly carried firearms. Many everyday carry firearms do not fit into the 6 competition handgun divisions. B. IDPA allows clubs to add “Specialty Divisions” for scoring. This division allows cartridges smaller than 9 mm, carry optics, activated lasers, mounted lights, and other firearms which do not fit into the other competition divisions to participate in matches. C. All other IDPA equipment rules apply for holsters and loading device holders as well as their placement on the body. Match Directors also have the option to allow junior shooters with .22 rimfire firearms to begin strings at low ready in lieu of requiring a holster. D. All IDPA membership rules apply. E. Specialty Division classifications are based on the shooters highest classification of regular IPDA divisions. F. Clubs are not required to implement this provision, and Match Directors are allowed discretion with implementation so that match quality remains high. Link to comment Share on other sites More sharing options...
sweetback Posted March 15, 2017 Author Share Posted March 15, 2017 I'm going to have (FUN) with it. Sent from my XT1080 using Tapatalk Link to comment Share on other sites More sharing options...
mreed911 Posted March 15, 2017 Share Posted March 15, 2017 2 hours ago, GregJ said: This is what I will be using for CO. CZ Phantom, Springer plate, and Burris FF3. Need some trigger work before I jump into the CO pool. I've seen discussion somewhere else. The mags + plates fit the mag gauge? Link to comment Share on other sites More sharing options...
GregJ Posted March 15, 2017 Share Posted March 15, 2017 7 hours ago, mreed911 said: I've seen discussion somewhere else. The mags + plates fit the mag gauge? Good point. Will check tonight. Link to comment Share on other sites More sharing options...
selecw Posted March 16, 2017 Share Posted March 16, 2017 I've been shooting this CZC SP01 for about 6 months and will be using it at Area 1 in a couple of weeks. It has around 10,000 rounds through it. It originally was coupled with an STS2 but now sports the slightly better DP Pro. Mag is Mec-Gar 17 round with Springer basepad. The gun has a slightly longer Australian model barrel. I have an additional iron sight slide for use in Production Division. Link to comment Share on other sites More sharing options...
trgt Posted March 17, 2017 Share Posted March 17, 2017 Link to comment Share on other sites More sharing options...
pete627 Posted March 18, 2017 Share Posted March 18, 2017 Standing by for next rule adjustment!! Link to comment Share on other sites More sharing options...
Dutchman195 Posted March 20, 2017 Share Posted March 20, 2017 On 3/14/2017 at 11:17 AM, Rugerglock said: Nice setup. I will running a Glock 19 with a dovetail mounted trijicon rmr. Thats what I settled on for the match at the end of this week. Link to comment Share on other sites More sharing options...
Mosig Posted March 21, 2017 Share Posted March 21, 2017 Glock 17 gen 3, vortex venom dovetail mount. TTI mag extension. Link to comment Share on other sites More sharing options...
selecw Posted March 21, 2017 Share Posted March 21, 2017 On 3/17/2017 at 8:49 PM, pete627 said: Standing by for next rule adjustment!! You are good to go when they allow 170 mags Link to comment Share on other sites More sharing options...
IronArcher Posted March 22, 2017 Share Posted March 22, 2017 Wondering what the expected cost of milling the slide and adding the dot would be.Also wondering if there is a dovetail mount that fits Tanfos so I can try this before eliminating my gun from Production.Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
OPENB Posted March 23, 2017 Share Posted March 23, 2017 4 hours ago, IronArcher said: Wondering what the expected cost of milling the slide and adding the dot would be. Also wondering if there is a dovetail mount that fits Tanfos so I can try this before eliminating my gun from Production. Sent from my iPhone using Tapatalk Pro Check out Primary Machine. Link to comment Share on other sites More sharing options...
IronArcher Posted March 23, 2017 Share Posted March 23, 2017 Ok.... I don't see it though.Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
SCTaylor Posted March 23, 2017 Share Posted March 23, 2017 15 hours ago, IronArcher said: Wondering what the expected cost of milling the slide and adding the dot would be. Also wondering if there is a dovetail mount that fits Tanfos so I can try this before eliminating my gun from Production. Sent from my iPhone using Tapatalk Pro Primary milling is $150+~$8 shipping insurance http://primarymachine.com/optic-milling/ Primary dovetail is $50 for Burris FF3 / Vortex Venom, $20 for RMR, Shield mini red dot or JPoint. http://primarymachine.com/tanfoglio-stock-ii-optic-mount/ Primiary milling & optic is - $400 for milling & Burris FF3 http://primarymachine.com/fastfire-iii-milling-combo/ Link to comment Share on other sites More sharing options...
IronArcher Posted March 23, 2017 Share Posted March 23, 2017 That is AWESOME!Thank you!I think I will be getting the dovetail mount to at least see if I like CO.Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
bsand Posted March 24, 2017 Share Posted March 24, 2017 CZ SP-01 Shadow Custom from CZC, springer precision dovetail mount, vortex viper. Im currently using mecgar 19 rounders. Have a couple TTI +2's for my 18 round cz mags. What springs should I be getting for the cz tube/folllower and a +2 basepad? Link to comment Share on other sites More sharing options...
Ck867 Posted March 24, 2017 Share Posted March 24, 2017 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now