Open1215 Posted August 15, 2015 Share Posted August 15, 2015 You can order them from eaa they are expensive! They are $350+ That being said... I've only done 10mm barrel, 10mm and .40 s&w out of that. 38 super barrel. Ran 38 super N supercomp out of it. I needed a 6in 38 super barrel to thread and add a comp to my lim pro. I dropped it in the hunter and had some fun. Lol. With that breach face you may be able to run 9mm too. I'm not sure, I've never used a .40 breach face tanfo for 9mm. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 15, 2015 Author Share Posted August 15, 2015 Thanks i figured it would be alright but ive read both ways. Ive been wanting a 6" .40 and contemplating just shooting it in the 10mm. Where can you find the 6" barrels in other calibers that you are saying will work? Here's a thread with lots of discussions on the matter: http://www.brianenos.com/forums/index.php?showtopic=199422&view=&hl=&fromsearch=1 Link to comment Share on other sites More sharing options...
Garmil Posted August 15, 2015 Share Posted August 15, 2015 Thanks i figured it would be alright but ive read both ways. Ive been wanting a 6" .40 and contemplating just shooting it in the 10mm. Where can you find the 6" barrels in other calibers that you are saying will work? Here's a thread with lots of discussions on the matter:http://www.brianenos.com/forums/index.php?showtopic=199422&view=&hl=&fromsearch=1 Looks like you had some tests in mind and never gave results. Did you ever look in to it any more? Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 15, 2015 Author Share Posted August 15, 2015 Looks like you had some tests in mind and never gave results. Did you ever look in to it any more? My primary focus is Open, so I recently decided to sell my Limited guns, reloading gear, mags, ect. Beyond shooting a handful of 40 rounds through a 10mm barrel I haven't done any testing on the issue. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 17, 2015 Author Share Posted August 17, 2015 I just got back from the range where I tried out my newest Tanfo Open creation:I opened up the first port of the comp just a hair, you can see it here on the left compared to the factory three port comp and my modified two port comp: I think I'm on the right track I'm going to drill three holes straight up like the one on the right, but I haven't decided what to do yet with the weight of the slide... Link to comment Share on other sites More sharing options...
vixty Posted August 18, 2015 Share Posted August 18, 2015 Is there a longer mag release that I can put on my sock 2. The rules now read that the button just cant be any bigger but longer doesent matter. Is the limited mag release longer that the OEM stock 2 release. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 18, 2015 Author Share Posted August 18, 2015 All the Elite pistols have the same mag release. Link to comment Share on other sites More sharing options...
Garmil Posted August 18, 2015 Share Posted August 18, 2015 What grip options are out there for an elite match with the canyon Creek Magwell? Have copper gun grips now would like something aluminum. Link to comment Share on other sites More sharing options...
Big Nick Posted August 19, 2015 Share Posted August 19, 2015 (edited) Atlas, How does the gun handle with the long barrel? I would think with the extra weight out front the gun would settle down quickly. Nice looking setup. Edited August 19, 2015 by Big Nick Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 19, 2015 Author Share Posted August 19, 2015 It still needs some holes to flatten it out, but I think with a light slide and three holes it's going to be a hot ticket! Link to comment Share on other sites More sharing options...
ScarPR Posted August 23, 2015 Share Posted August 23, 2015 hello everyone, I been lurking for a while now. Want to post here instead of making a separate thread for questions. I have seen a couple of threads everytime someone gets a production gun (either stock /or limited pro). From search I seen people recommending the EG parts but anyone have been able to compare those with the Henning upgrade kit ? I also seen many lists of what should be upgraded, is there anyone who has run the gun for multiple thousands of rounds before upgrading to see how the gun breaks in? and if they noticed a difference after upgrading, running a trigger job and polishing parts... ? Link to comment Share on other sites More sharing options...
DougM Posted August 24, 2015 Share Posted August 24, 2015 I've also been lurking on this site for quite a while and as a result of the info, bought my first Tanfoglio - an Elite Match in 40S&W. Great pistol right out of the box. Anyway, I'd like to add a 10mm barrel to it but EAA only makes them out of gold - or should, given how much they want for one. All I'm looking for is the 10mm barrel. Large frame, 4.75" barrel. I don't want a conversion slide, etc. Any ideas? Link to comment Share on other sites More sharing options...
BrazeauRacing Posted August 24, 2015 Share Posted August 24, 2015 What grip options are out there for an elite match with the canyon Creek Magwell? Have copper gun grips now would like something aluminum. Anything for a Stock II/Stock III/Limited Pro should work on a Match with the CC magwell. I have old style Henning grips on my Match that are for a S2/S3/LP, but had to modify them just a little bit. See my post here: http://www.brianenos.com/forums/index.php?showtopic=199234&p=2302812 Alternatively, you could purchase Henning's new contoured grips specific for a Match/Stock I and cut them to fit the magwell. http://henningshop.com/products/tanfoglio-full-size-grip-panels-large-frame-new Link to comment Share on other sites More sharing options...
Garmil Posted August 26, 2015 Share Posted August 26, 2015 What grip options are out there for an elite match with the canyon Creek Magwell? Have copper gun grips now would like something aluminum. Anything for a Stock II/Stock III/Limited Pro should work on a Match with the CC magwell. I have old style Henning grips on my Match that are for a S2/S3/LP, but had to modify them just a little bit. See my post here: http://www.brianenos.com/forums/index.php?showtopic=199234&p=2302812 Alternatively, you could purchase Henning's new contoured grips specific for a Match/Stock I and cut them to fit the magwell. http://henningshop.com/products/tanfoglio-full-size-grip-panels-large-frame-new Thanks, for some reason I was thinking the match frames were more different than that. Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 5, 2015 Author Share Posted September 5, 2015 (edited) Here's a small frame I recently gave to a machinist buddy to play with, I've since stroked it and it shoots pretty well. I plan to take some slow mo video of it soon. Edited September 5, 2015 by kneelingatlas Link to comment Share on other sites More sharing options...
haiedras Posted September 5, 2015 Share Posted September 5, 2015 So that's how it turned out... Link to comment Share on other sites More sharing options...
Leadpilot Posted September 5, 2015 Share Posted September 5, 2015 Nice! Link to comment Share on other sites More sharing options...
Open1215 Posted September 5, 2015 Share Posted September 5, 2015 Looks good! Link to comment Share on other sites More sharing options...
BeerBaron Posted September 7, 2015 Share Posted September 7, 2015 that is hot. Link to comment Share on other sites More sharing options...
elftech86 Posted October 26, 2015 Share Posted October 26, 2015 Hello. I recently joined the Enos forums and wanted to pop in to say hello, and ask a couple of questions. Have any of you had experience with the Henning / tanfoglio short reach flat trigger? I want to try one out, but their site states "out of stock" I currently run an EAA witness limited 10, which was converted to .40 for USPSA. On that note, would anyone happen to be looking for some stock 10mm parts for the Witness L10? Link to comment Share on other sites More sharing options...
kneelingatlas Posted November 7, 2015 Author Share Posted November 7, 2015 Latest and greatest Tanfo Open gun Chambered in 9mm, stroked by 0.200", (3) 5/32" holes angled back ten degrees from vertical, Cheely CMore mount, slide lightened by 1.7oz, overall weight of 43.5oz. Link to comment Share on other sites More sharing options...
Open1215 Posted November 7, 2015 Share Posted November 7, 2015 Drool drool drool... WOW I can't wait to see video of that! Link to comment Share on other sites More sharing options...
BeerBaron Posted November 8, 2015 Share Posted November 8, 2015 Mmm yummy. I have high hopes. Based on the 4.5 or 4.75inch top end? With the three holes it should open up combos like 3n38 with 115s in the 9mm which in a v12 would struggle to go major. I will patiently await range report. Link to comment Share on other sites More sharing options...
kneelingatlas Posted November 8, 2015 Author Share Posted November 8, 2015 It started as a 4.75" Limited slide. I want to shoot it over a chrono, but the way the holes are spaced I could easily do another two: I had some WAC/115 loads I tried on Friday and the initial report is that it's awesome! I'm going to load some SP2/115 loads to film in slow mo next week. Link to comment Share on other sites More sharing options...
michael1one Posted November 18, 2015 Share Posted November 18, 2015 Here is something that Beven Gram just finished for me. Might not be the fastest shooter but I really love the work that Beven does. Also the best customer service ever. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now