AHI

7.3 auto comp 124 PD JHP 1.65-1.70

shoot it till you loose it or see issues last summer i loaded the same cases 27 times only a few split none developed loose primer pockets (actually they got to tight) after 15ish loading's most would have stopped loading those cases.

small rifle plate is all i have ever used. is your bench/press level? have used a binder clip on occasion to adjust the drop hole https://www.staples.com/Staples-Binder-Clips-Medium-1-1-4-Width-5-8-Capacity-Black/product_103549?cid=PS:GooglePLAs:103549&ci_src=17588969&ci_sku=103549&KPID=103549&gclid=Cj0KCQjwjcfzBRCHARIsAO-1_OqLVjLLWNNdAnm6AN9kCk64-XNGRp0Aaxbv_Mcn-YJQBYkj0gyusaQaAjrPEALw_wcB

https://www.alliantpowder.com/default.aspx Can say there are no PSI problems with Sport Pistol . Also doing a long term test with SP and it appears to actually to be cleaner than N320 but not finished with testing (only 10k without cleaning)

SPORT PISTOL E3

you have both powders so why not do a load with both and compare how you perceive the recoil impulse. I have two glocks a 35 and a 24. in the 24 I prefer a load using Bulls Eye a faster powder than N320 in the 35 I prefer a load with WSF a powder very close to N340. Only you can make the decision . Recoil can be very subjective.

almost hate to recommend this but https://metalform.us/contact/

I quit using LOVEX powders because of the issues you are having. dont know there definition of clean but its different than mine. Will add that in my testing the USA manufacture AA#7 leaves a lot less residue in the guns and more consistent lot to lot, Just my opinion others may very.

He does not wont any help.

? Can you reword your question? So that it makes scene to someone other than you.

this has been confirmed by both SW and Western representatives. same formula different factories.

Crimped primer ? ck pocket with this https://www.brownells.com/reloading/measuring-tools/case-gauges-headspace-tools/swage-gage-primer-pocket-gauge-prod71030.aspx

Never mind its your set up thats why no one can help you

can pretty much guarantee acetone to "eat" the pump of any spray bottle. The bottle may survive but not the pump. Some will not hold up to alcohol. We purchase lanolin by the gallon from medical supply vendor.

The DENATURED alcohol that is available locally takes a lot (hours)to evaporate. We use the red bottle of ISO HEET . Depending on temp and humidity it will evaporate very fast.

if you have the small pistol plate try it . its all i have ever used for 40 S&W.

What plate are you using for 40 s&w?

this is the answer for a 650/750. now on a 1050/1100 you could use you m die .

I know of no law against selling this ammo. Lets look at it another way . Can you currently buy any ammo like this? You can by the way.

was your older powder made in the USA or Europe?

Told ya

Jack Does your gun have a feed ramp? If not it will help. TRUBL(taccom3gun) and my self have both stated not all 33round Glock mags will work. Try a different mag. Now Ill make a suggestion its not real popular.Get a ETS 33 round mag. Install it on the Goliath(it will work) .Be care full they are a harder plastic (brittle). See if that works.If it does you know it is the Glock mag.Also the ETS mag presents the round more nose up.

If you ck them every day four a month you will see a pattern with tear discounts also ck your tracking notice usually has a 10% discount code that does not expire last I checked it was BDX

Look on page 13 of the owners manual fig 33. If that assembly is a little high it will cause your issues. Dirt /crap/corn cob media in the slide parts will cause issues also. The only primer issues i have had were related to the bracket assembly in fig 33. If the has "jammed" the tends to move up putting the primer system out of time.