jstagn

Normal with dillion.

Alliant E-3 3.7gr 1.210oal .40 200gr Blue Bullet pf167-170. Never tried Clay dot its listed right next to e-3. Has anyone compared e-3 to clay dot?

web site where to buy?

Thank You !!!!

Can someone post the coupon code for blue bullets?

Anyone else get an email with the subject line uspsa.org security issue?

Or break the tab off the safety, but it will still move. Then you may jam the shock buff in.

I don't know about the 9mm BUT if you use lead/lead coated they do not drop all the way down in 45acp because of the bullet profile, plated work fine.

After going back and forth I sight in (iron sights) for USPSA at 25 yards. This takes out any minor issues that will not show up at 15 yards. Start at 15 then go to 25.

Thanks rishii, exactly what I wanted to know.....

You have the price wrong its $186...

Has anyone actually loaded Blue Bullets and Black Bullets to compare both, or any other camparasion between the various Coated lead bullets>

Shoot at the ALAMO.

14 years old, price way too high (same as when new) , put 100 of your rounds thru it BEFORE you buy.

2 years for a barrel, hope it shoots 1 holers.

Disconnector seems to move very freely, but thats a thought.

Older para p14-45. After cleaning BEFORE I put in barrel and any other parts, I lube rails as usual and put the slide on to work the lube back and forth. When I do this the slide will sometimes 'hang up' on something when I rack it to the rear. I slight tap/jiggle and everything is OK. I put the gun back together and the same thing happens just aroung where the slide lock lever is. Thoughts?????

AS far as felt recoil with the same gun in 40 minor and 9 minor which is the softer shooter?

Anyone know where I can get Clays...

If you are switching from FMJ or Plated bullets to moly you should be LOWERING your powder load, usually by about 10% for the same FPS....

N320 with 3.0 -3.1 check cycling of gun.

Thanks Fishsticks, going to order one, stock extractor is good for 2k-4k rounds (reloads) according to one 'expert' I spoke with. Thanks to all who helped.....

Rob, where can I get the Apex extractor? Thanks....

it is not a stuck round but a stuck empty brass. The slide comes back fine and tries to feed the new round but the empty brass is still in the chamber. If I lock the slide back and remove the mag and the new round it was trying to feed, I can see the empty brass in the chamber. If i let the slide go home to try and eject the empty, the slide (extractor) must lock onto the empty and I can't pull the slide back, so i use a dowel rod down the barrel and push the empty out, as the slide also goes back. The brass seems bulged at the bottom so it is tight in the chamber. Since I case gauge everything I am at a loss on what is happening. PF is 128 147 xtreme plated oal is 1.130-1.135. Over 5k+ rounds with this combo. no problems til now. As I said 2 in the last 200+ rounds. Gun shoots fine. Maybe I somehow missed case gauging some ammo, however, I can't remember a loaded round not passing the case gauge test anyhow.

Since I case gauge all my ammo I am wondering if somehow the brass is expanding after the shot goes off, maybe range pickup 9mm MAJOR stuff. I will clean the extractor.