Unleashed Posted September 11, 2009 Share Posted September 11, 2009 I am finally going to take a step out of the production realm with my G22 and I was wondering what basepads are working best for folks in limited/open. Overall reliability is of the utmost importance but I am also looking for the highest capacity. Looking forward to everyone's feedback... Link to comment Share on other sites More sharing options...
dirty whiteboy Posted September 11, 2009 Share Posted September 11, 2009 I've had good luck w/ arredondo's. Link to comment Share on other sites More sharing options...
quade Posted September 11, 2009 Share Posted September 11, 2009 arredondo's will usually hold 1-2 more but only because they (well the one's i have) will not fit the uspsa gauge even though they are sold as legal. dawson's are nice and most always fit the gauge. Link to comment Share on other sites More sharing options...
Unleashed Posted September 11, 2009 Author Share Posted September 11, 2009 What kind of capacity is everyone getting out of their magazines with various pads? Link to comment Share on other sites More sharing options...
AR Gunner Posted September 11, 2009 Share Posted September 11, 2009 With my G35 I can get 19 with Dawson pads, 20 if I force the issue. Link to comment Share on other sites More sharing options...
racerba Posted September 11, 2009 Share Posted September 11, 2009 I can squeeze 20 into my Dawsons, but definitely NOT reloadable. So I just load 19. Link to comment Share on other sites More sharing options...
wyoshooter Posted September 11, 2009 Share Posted September 11, 2009 I can get 20 in my Arredondos, So I can start with 21 in gun, reload mag have 19 in them. I do 19 because the mags seat easier. All my 40 brass is resized first with a redding push-thru, then ran thur a dillion die. Link to comment Share on other sites More sharing options...
Micah Posted September 11, 2009 Share Posted September 11, 2009 Arredondos are great...and very fast to disassemble if you happen to drop them into a pile of sand. Taylor Freelance require removing two Allen screws. Link to comment Share on other sites More sharing options...
SA Friday Posted September 11, 2009 Share Posted September 11, 2009 I can get 20 in my Arredondos, So I can start with 21 in gun, reload mag have 19 in them. I do 19 because the mags seat easier. All my 40 brass is resized first with a redding push-thru, then ran thur a dillion die. This is what I've seen with Arredondos, Taylor Freelance, and Dawson extensions. They all three work. Link to comment Share on other sites More sharing options...
Heckler Posted September 11, 2009 Share Posted September 11, 2009 I modded my follower and can get 20 in my Dawsons. They are quick and easy to disassemble and clean after a stage. They have really filled the bill for my purpose. Link to comment Share on other sites More sharing options...
Jman Posted September 11, 2009 Share Posted September 11, 2009 I searched and dug these up. Hope their helpful. http://www.brianenos.com/forums/index.php?...extended%2Bpads Jim Link to comment Share on other sites More sharing options...
soundwave Posted September 11, 2009 Share Posted September 11, 2009 Like many others here, I can get 19 easily in Arrendondo BP's. 20 fit, but will not seat without divine intervention. Link to comment Share on other sites More sharing options...
Harmon Posted September 11, 2009 Share Posted September 11, 2009 they TF require only 1 screw to be removed for cleaning. i get 19/20 in all of my 140s using dawson and TF and 24/25 in my big stick. Link to comment Share on other sites More sharing options...
zipper046 Posted September 13, 2009 Share Posted September 13, 2009 arredondo's....on my G35 I get 20 rounds no problem. z- Link to comment Share on other sites More sharing options...
kildar Posted September 14, 2009 Share Posted September 14, 2009 Arredondo for my Glock 35 in Limited. 20 rounds reloadable. Link to comment Share on other sites More sharing options...
the duck of death Posted September 15, 2009 Share Posted September 15, 2009 Make mag loading easier, take 1/8" off the leg of the follower. Link to comment Share on other sites More sharing options...
bullitt5172 Posted September 16, 2009 Share Posted September 16, 2009 I did the searches and asked around, same info that has been stated in this thread. I ended up getting the Taylor extensions and they have been excellent. Link to comment Share on other sites More sharing options...
Jadeslade Posted September 16, 2009 Share Posted September 16, 2009 I searched and dug these up. Hope their helpful.http://www.brianenos.com/forums/index.php?...extended%2Bpads Jim Jim I get errors when I click on the link. FYI Link to comment Share on other sites More sharing options...
Jman Posted September 17, 2009 Share Posted September 17, 2009 Hmm...work fine when I posted it. Try this one. http://www.brianenos.com/forums/index.php?...d%2Bbase%2Bpads Jim Link to comment Share on other sites More sharing options...
Jadeslade Posted September 17, 2009 Share Posted September 17, 2009 That works. Thanks. Who knows? Computers. Link to comment Share on other sites More sharing options...
EkuJustice Posted September 17, 2009 Share Posted September 17, 2009 Taylors, usually 19 reloadable. A couple of mine can get 20 unreloadable. Dawson 20 reloadable Link to comment Share on other sites More sharing options...
Silverscooby27 Posted September 27, 2009 Share Posted September 27, 2009 Can only get 17 (!) into my TF plastic extensions. May try to go to the Dawsons. Don't know if it's the actual Glock Mag or what. Also, some of my mags have a tiny little number "1" on them. Does anybody know the significance of this? Link to comment Share on other sites More sharing options...
Aircooled6racer Posted September 27, 2009 Share Posted September 27, 2009 Hello: I get 21 reloadable rounds in my LE marked mags with Arredondo base pads. I have 2 that I can get 22 in as well. Thanks, Eric Link to comment Share on other sites More sharing options...
Tyro Shooter Posted September 29, 2009 Share Posted September 29, 2009 Arredondo's 20 rounds reloadable in the latest gen of Glock mags in 40S&W 23 rounds for the 9mm Link to comment Share on other sites More sharing options...
No Luck Posted October 26, 2009 Share Posted October 26, 2009 I have both TF and Dawsons...I get a reloadable 20 in both, but only after modifications. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now