Corey Posted July 14, 2010 Share Posted July 14, 2010 Seems like a pretty sweet lil deal. http://www.brianenos.com/forums/index.php?showtopic=90376 Link to comment Share on other sites More sharing options...
Seth Posted July 14, 2010 Author Share Posted July 14, 2010 Yep. Do a search and you'll find my pictures and small review. Its an excellent sight. Virgil did a soft launch a few months ago to beta test the sight and I can tell you that its dead solid and ready for prime time. S. Link to comment Share on other sites More sharing options...
want2race Posted July 14, 2010 Share Posted July 14, 2010 I second Nemo's post in the other thread. NOVAK cut base please. I don't care if I have to modify the existing Novak cut, but the current adjustables don't have a straight blade. Link to comment Share on other sites More sharing options...
ExtremeShot Posted July 14, 2010 Share Posted July 14, 2010 Sorry for the duplicate thread on the subject...I did a search for "Tripp Sight" but didn't see the other post. Link to comment Share on other sites More sharing options...
bbbean Posted July 14, 2010 Share Posted July 14, 2010 FWIW, I installed one during the "soft launch", and am pretty happy with it so far. Great design, and certainly doesn't seem to be susceptible to the pin drift I've had with a couple of bo-mar copies. Mine did vibrate loose after a thousand rounds, but that's because the brain dead gunsmith who installed it (me) didn't use any loctite on the set screws. A little loctite, and problem solved. Link to comment Share on other sites More sharing options...
ExtremeShot Posted July 14, 2010 Share Posted July 14, 2010 Is Virgil only selling them direct or can you buy them elsewhere? Link to comment Share on other sites More sharing options...
Seth Posted July 14, 2010 Author Share Posted July 14, 2010 (edited) I'm pretty sure they're direct only. Its the bees knees. More info here: http://www.brianenos...showtopic=90376 Edited July 14, 2010 by Seth Link to comment Share on other sites More sharing options...
a.roberts Posted July 14, 2010 Share Posted July 14, 2010 Very slick hardware. And it's now on my list of things I need that I didn't know I needed... Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 1, 2010 Share Posted December 1, 2010 Hello: Well the IDPA pistol is getting close to being finished so I guess I need to order one of these Thanks, Eric Link to comment Share on other sites More sharing options...
Fishin6061 Posted December 1, 2010 Share Posted December 1, 2010 Do these fit an adjustable Kimber cut? Link to comment Share on other sites More sharing options...
ControlTheGun Posted December 1, 2010 Share Posted December 1, 2010 Do these fit an adjustable Kimber cut? I was just going to ask the same thing. The little nut fell off my Kimber sight at the last match. Link to comment Share on other sites More sharing options...
Corey Posted December 1, 2010 Share Posted December 1, 2010 as stated earlier in the thread...if your Kimbers are cut for a Bomar style sight, this will fit it... Link to comment Share on other sites More sharing options...
fitmk Posted December 1, 2010 Share Posted December 1, 2010 (edited) ive had this setup on my baer for awhile and i agree it blows the bomar sprung sights away... Edited December 1, 2010 by fitmk Link to comment Share on other sites More sharing options...
BlueOvalBruin Posted December 4, 2010 Share Posted December 4, 2010 Will this sight fit a Kimber slide? Link to comment Share on other sites More sharing options...
G-ManBart Posted December 4, 2010 Share Posted December 4, 2010 Will this sight fit a Kimber slide? Did ya read the whole thread? I think that question has been asked and answered three or four times Link to comment Share on other sites More sharing options...
BlueOvalBruin Posted December 4, 2010 Share Posted December 4, 2010 Will this sight fit a Kimber slide? Did ya read the whole thread? I think that question has been asked and answered three or four times I just had to ask again. Link to comment Share on other sites More sharing options...
diehli Posted December 4, 2010 Share Posted December 4, 2010 What about Kimber slides? Will it fit their sight cut? Exam prep kills decorum and comedic timing. And that's assuming I had either to begin with. Link to comment Share on other sites More sharing options...
Seth Posted December 4, 2010 Author Share Posted December 4, 2010 What about Kimber slides? Will it fit their sight cut? It fits every sight cut of every slide EVA. Link to comment Share on other sites More sharing options...
Mark K Posted December 4, 2010 Share Posted December 4, 2010 Got mine a month ago, after my third Brown sight literally fell apart while I was shooting (they have been good enough to rebuild them and no cost). I really love it. Mark K Link to comment Share on other sites More sharing options...
Fishin6061 Posted December 7, 2010 Share Posted December 7, 2010 Also interested if they will fit the Kimber cut. May have to email Tripp Link to comment Share on other sites More sharing options...
Fishin6061 Posted December 7, 2010 Share Posted December 7, 2010 Just read entire thread. Sorry Link to comment Share on other sites More sharing options...
rack&roll Posted December 19, 2010 Share Posted December 19, 2010 I ordered mine 11 days ago. His website says he normally ships next day. I am impatiently hoping it turns up soon. Is it normal to take this long? Am I expecting too much? Link to comment Share on other sites More sharing options...
Seth Posted December 19, 2010 Author Share Posted December 19, 2010 Best to just give a call and ask. Chances are VERY good Virgil will answer the phone himself. Link to comment Share on other sites More sharing options...
Neomet Posted December 19, 2010 Share Posted December 19, 2010 Some times he is waiting on parts to arrive that will slow delivery. Link to comment Share on other sites More sharing options...
jan13 Posted December 20, 2010 Share Posted December 20, 2010 Are these sights able to be collapsed slightly like STI/bomar adjustable ones? I shoot IPSC and for my pistol to fit the "box" the rear sight needs to be able to be collapsed/pushed down. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now