pmd Posted April 29, 2009 Share Posted April 29, 2009 Here's a Tactical Solutions conv kit Link to comment Share on other sites More sharing options...
cdrissel Posted April 29, 2009 Author Share Posted April 29, 2009 Here's a page on the grip conversion.http://www.wiztechs.com/knightsrealm/guns/...grips/grips.htm Great link! I like the step by step with photos. Link to comment Share on other sites More sharing options...
cdrissel Posted April 29, 2009 Author Share Posted April 29, 2009 My MKIII 22/45 with grip mod to accept Hogue 1911 grips! Who did the grip mod? I did the mod myself. My friend set up his mill, so I could mill the sides flat, lay the grips on the side to mark the holes, drill and tap the holes, then use epoxy to secure the 1911 grip studs. It makes the grip almost exactly the same width as a 1911! Nice! I might have to look into doing this. Link to comment Share on other sites More sharing options...
G-ManBart Posted April 30, 2009 Share Posted April 30, 2009 (edited) This isn't my gun, but mine will look very similar to this sometime next week. Smith M41 with a Bully Barrels Steel Challenge barrel. The barrel is machined so that a C-more bolts directly to it and they weigh 14oz which is quite a bit less than a factory barrel and as light as the Clark STC barrel which requires a bracket to mount the C-more that adds weight and height. Mine won't have the polymer comp...it'll be aluminum. I'm not sure who made these grips, but I'm getting a set of Herretts that look similar. Edited April 30, 2009 by G-ManBart Link to comment Share on other sites More sharing options...
Kingman Posted April 30, 2009 Share Posted April 30, 2009 Ok, this is amazing. Who made the mag well. This isn't my gun, but mine will look very similar to this sometime next week. Smith M41 with a Bully Barrels Steel Challenge barrel. The barrel is machined so that a C-more bolts directly to it and they weigh 14oz which is quite a bit less than a factory barrel and as light as the Clark STC barrel which requires a bracket to mount the C-more that adds weight and height. Mine won't have the polymer comp...it'll be aluminum. I'm not sure who made these grips, but I'm getting a set of Herretts that look similar. Link to comment Share on other sites More sharing options...
G-ManBart Posted April 30, 2009 Share Posted April 30, 2009 Man, that's the one question I haven't gotten an answer to yet. I'm going to try and find out as it's really cool! I'll post details if I can sort it out. R, Ok, this is amazing. Who made the mag well. Link to comment Share on other sites More sharing options...
S&W627shooter Posted April 30, 2009 Share Posted April 30, 2009 What's your opinion on that Tac-Sol upper?I'm thinking about getting one for my STI SteelMaster. Full disclosure, I'm one of the Tac-Sol sponsored shooters so I'm a bit biased That said it runs 100% unless the ammo is a dud. Full disclosure, I'm not sponsored by Tac-Sol and am jealous! Anyway, I am totally sold on Tactical Solutions products. I have their barrels on both of my competition guns. My 10/22 and Buckmark have matching Red fluted barrels! I also love their extended mag release fo rthe 10/22--also in matching red. I even have their FO front sight on my buckmark. Now if I could scrape up enough money for one of their AR uppers! My wife shot a TacSol upper that a friend let her borrow last night at our indoor match, and it was flawless and accurate! It looks really cool too. Link to comment Share on other sites More sharing options...
PekkaP Posted May 1, 2009 Share Posted May 1, 2009 Plain STI/Marvel,nothing fancy. Link to comment Share on other sites More sharing options...
outerlimits Posted May 1, 2009 Share Posted May 1, 2009 with the primer situation becoming what it is, these will be what we'll be shooting in matches! Link to comment Share on other sites More sharing options...
Sean Gaines Posted May 2, 2009 Share Posted May 2, 2009 with the primer situation becoming what it is, these will be what we'll be shooting in matches! I actually thought the same thing? hmmmm Link to comment Share on other sites More sharing options...
J-Hon Posted May 4, 2009 Share Posted May 4, 2009 Mines still a work in progress - Kadet kit on top of a chopped up '75B frame that once belonged to Eerw. Still needs a threaded barrel for a comp/suppressor, and AL grips + magwell. I also am exploring ways to make high-cap mags for it. Link to comment Share on other sites More sharing options...
Fireant Posted May 4, 2009 Share Posted May 4, 2009 Here is mine, I'm still looking for a lighter red dot. Tac Sol upper on my Tactical frame. Link to comment Share on other sites More sharing options...
G-ManBart Posted May 6, 2009 Share Posted May 6, 2009 Here's the Model 41 with the new Steel Challenge Bully Barrel. Some Herrett's grips are up next. Link to comment Share on other sites More sharing options...
nm3gnr Posted May 6, 2009 Share Posted May 6, 2009 Bart, That is awesome Can't wait to see it in person. Link to comment Share on other sites More sharing options...
DJPoLo Posted May 7, 2009 Share Posted May 7, 2009 nice guns, what are you guys using for holsters? -Chet Link to comment Share on other sites More sharing options...
jhgtyre Posted May 7, 2009 Share Posted May 7, 2009 nice guns, what are you guys using for holsters? -Chet The Aluminator? -ld Link to comment Share on other sites More sharing options...
DJPoLo Posted May 8, 2009 Share Posted May 8, 2009 The Aluminator?-ld Yes. -Chet Link to comment Share on other sites More sharing options...
sahauptman Posted May 11, 2009 Share Posted May 11, 2009 Link to comment Share on other sites More sharing options...
DJPoLo Posted May 20, 2009 Share Posted May 20, 2009 The Aluminator?-ld Yes. -Chet Some close-up pics, as requested: -Chet Link to comment Share on other sites More sharing options...
lcambre Posted May 23, 2009 Share Posted May 23, 2009 Model 41 with 7" barrel cut down and threaded. Link to comment Share on other sites More sharing options...
G-ManBart Posted May 23, 2009 Share Posted May 23, 2009 Model 41 with 7" barrel cut down and threaded. Hmmm...that's got me thinking. The barrel on my gun posted above is threaded. What brand/model can is that? Any idea what the thread is on it? Sorry, other than what I see at work I'm relatively ignorant on cans....other than that I like them I may be in a place where I can have a small range in the future and a setup like that would make it totally unlikely anybody would notice/complain. R, Link to comment Share on other sites More sharing options...
ken hebert Posted May 23, 2009 Share Posted May 23, 2009 Looks like a Gemtec Outback 2. Really nice can for the money, think it has a 34db rating..? IIRC is threaded to 1/2x28. Link to comment Share on other sites More sharing options...
G-ManBart Posted May 24, 2009 Share Posted May 24, 2009 Looks like a Gemtec Outback 2. Really nice can for the money, think it has a 34db rating..? IIRC is threaded to 1/2x28. Okay...thx. I did a little research on .22 cans and it seems most, if not all, are 1/2x28 which is the thread on my barrel. Link to comment Share on other sites More sharing options...
RevolverJockey Posted May 25, 2009 Share Posted May 25, 2009 Has anyone tried drilling and tapping for a Buckmark for a slide racker? Pictures would be appreciated as well. Lee Link to comment Share on other sites More sharing options...
BrianATL Posted May 25, 2009 Share Posted May 25, 2009 Has anyone tried drilling and tapping for a Buckmark for a slide racker? Pictures would be appreciated as well.Lee No picture but some of the guys around here drill and tap the slide and put in a bolt with a knurled end. Works pretty slick Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now