zhunter Posted November 14, 2012 Share Posted November 14, 2012 Yes, over here, i.e. USPSA, we have a 43 oz weight limit I have a non-race-ready Caspian, and it did not make weight until I put it on a "diet" Link to comment Share on other sites More sharing options...
BlueVFRank Posted November 14, 2012 Share Posted November 14, 2012 Aha, well this one already has a full length guide rod and if the sigths move a inch i'll replace it with a tungsten guide rod just to make sure it doesn't move anymore He but you guys get to use 6 inch slides and 140mm mags, we have "the box" Cant wait till the Worldshoot in Florida 2014. it's always been a dream for me to shoot matches on the birthground of the 1911 Link to comment Share on other sites More sharing options...
zhunter Posted November 14, 2012 Share Posted November 14, 2012 I shoot Single Stack, and we have the Box and the Weight. Trust me, a Caspian that has not had weight removed will not make weight for USPSA. For that matter, most of us using a certain basepad have to trim the basepad to make it fit in the box as well. Link to comment Share on other sites More sharing options...
dskinsler83 Posted November 14, 2012 Share Posted November 14, 2012 My Prize SVI SS. It has barrels in 9mm, 38 super, .40 and .45acp. Where did you get the grips!!!! Link to comment Share on other sites More sharing options...
skdmrklcy Posted November 15, 2012 Share Posted November 15, 2012 Trojan 9mm: Link to comment Share on other sites More sharing options...
BlueVFRank Posted November 15, 2012 Share Posted November 15, 2012 For that matter, most of us using a certain basepad have to trim the basepad to make it fit in the box as well. Hmm i'm using Tripp mags with a alloy basepad now that wouldn't get me in to trouble would it? In IPSC for major scoring calibers your limited to 8 round (and 10 for minor). It's a nice change coming from Brazilian mags in standard to "just" using mags that always work. Link to comment Share on other sites More sharing options...
zhunter Posted November 15, 2012 Share Posted November 15, 2012 For that matter, most of us using a certain basepad have to trim the basepad to make it fit in the box as well. Hmm i'm using Tripp mags with a alloy basepad now that wouldn't get me in to trouble would it? In IPSC for major scoring calibers your limited to 8 round (and 10 for minor). It's a nice change coming from Brazilian mags in standard to "just" using mags that always work. You should be fine, the ones I am talking about are the Wilson 47 DE basepads Link to comment Share on other sites More sharing options...
lumpygravy Posted November 15, 2012 Share Posted November 15, 2012 My Prize SVI SS. It has barrels in 9mm, 38 super, .40 and .45acp. Where did you get the grips!!!! Those look like Larry Davidson's Grenade Punishers. Link to comment Share on other sites More sharing options...
Rob Tompkins Posted November 16, 2012 Share Posted November 16, 2012 The new kid on the block! It followed me home recently. Link to comment Share on other sites More sharing options...
knedrgr Posted November 17, 2012 Share Posted November 17, 2012 Dan Wesson CCO Remsport Heavy Duty STI Duty One 45 STI Duty One 9 and 45 Link to comment Share on other sites More sharing options...
tpcdvc Posted November 24, 2012 Share Posted November 24, 2012 Just back from hard chrome! Link to comment Share on other sites More sharing options...
lumpygravy Posted November 25, 2012 Share Posted November 25, 2012 That's a sweet SS blaster May I ask who did the hard chrome? and I can't quite tell fromthe pics, but did you chrome the hammer too? Just back from hard chrome! Link to comment Share on other sites More sharing options...
tpcdvc Posted November 25, 2012 Share Posted November 25, 2012 That's a sweet SS blaster May I ask who did the hard chrome? and I can't quite tell fromthe pics, but did you chrome the hammer too? Metaloy. They do great work!! Link to comment Share on other sites More sharing options...
GeorgeD Posted December 1, 2012 Share Posted December 1, 2012 Dont shoot much single stack, but I love 1911s. George Link to comment Share on other sites More sharing options...
WSMBUCK Posted December 2, 2012 Share Posted December 2, 2012 Some good looking SS here Link to comment Share on other sites More sharing options...
dskinsler83 Posted December 2, 2012 Share Posted December 2, 2012 Just back from hard chrome! Akia custom build?? Looks like his work. Link to comment Share on other sites More sharing options...
tpcdvc Posted December 3, 2012 Share Posted December 3, 2012 Just back from hard chrome! Akia custom build?? Looks like his work. No, I built it. Link to comment Share on other sites More sharing options...
dskinsler83 Posted December 3, 2012 Share Posted December 3, 2012 Just back from hard chrome! Akia custom build?? Looks like his work. No, I built it. Well I love it man I love the slide design!! Link to comment Share on other sites More sharing options...
tpcdvc Posted December 3, 2012 Share Posted December 3, 2012 Here is another SS that I am finishing. This one still needs the dust cover cut. The rear cocking serrations are the shooters initials. I'm excited about finishing this one. Link to comment Share on other sites More sharing options...
dskinsler83 Posted December 3, 2012 Share Posted December 3, 2012 Here is another SS that I am finishing. This one still needs the dust cover cut. The rear cocking serrations are the shooters initials. I'm excited about finishing this one. That is awesome!!!!! Link to comment Share on other sites More sharing options...
dskinsler83 Posted December 3, 2012 Share Posted December 3, 2012 What kinda mill you use? Link to comment Share on other sites More sharing options...
tpcdvc Posted December 4, 2012 Share Posted December 4, 2012 What kinda mill you use? It's an Enco with a power feed and DRO. I'm pretty happy with it. Link to comment Share on other sites More sharing options...
818-DVC Posted December 5, 2012 Share Posted December 5, 2012 Handguns must be based on and visibly resemble the classic 1911-genre design. This means a single-stack, one piece metal frame, and a dust cover (without an accessory rail) which has a maximum length of 75mm when measured from the leading edge of the dust cover to the rear of the slide stop pin. Magazine well openings cannot exceed a maximum outside width of 35mm. Compliance is checked by way of a 35mm wide, and at least 5mm deep, notch carved into the outside of the box, or by use of a ruler or caliper, as approved by the Range Master. 17. Prohibited modifications are slide lightening cuts, weak hand thumb rests and slide rackers. 18. Permitted modifications are those of a cosmetic nature (e.g. custom grip panels, scrimshaw or similar surface engravings, checkering or serrations etc.), replacement single or ambidextrous thumb safeties, and any open sights (which may be embedded into the slide). I'm new to SS, and I just bought the pics below for this division. While showing it off, I would like to get some clarification on these rules. I see a lot of 3 sided slides, and customization, Will the HP cut up front keep me out of the game? Gun was a Mil-Spec. here's the list from what I can can tell thus far: Nowlin barrel/bushing S&A MSH and magwell soon to be techwell w modded VZ G10's fit properly. Fusion trigger EGW internals Ed brown Bomar style night sights melted in to flat top Going F/O up front. I can't tell what hammer, but I'm changing it to an HD or Koenig. I'm also going to have the trigger guard squared with a med Flat SV trigger Link to comment Share on other sites More sharing options...
lumpygravy Posted December 5, 2012 Share Posted December 5, 2012 I'm new to SS, and I just bought the pics below for this division. While showing it off, I would like to get some clarification on these rules. I see a lot of 3 sided slides, and customization, Will the HP cut up front keep me out of the game? Honestly, I never thought about an HP cut nor do I recall anyone asking about it as it may relate to SS rules. Good question. I'm guessing the HP cut will fall under: 18. Permitted modifications are those of a cosmetic nature (e.g. custom grip panels, scrimshaw or similar surface engravings, checkering or serrations etc.), replacement single or ambidextrous thumb safeties, and any open sights (which may be embedded into the slide). Specifically, the "cosmetic" part. Nice piece BTW.... Link to comment Share on other sites More sharing options...
818-DVC Posted December 5, 2012 Share Posted December 5, 2012 Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now