RMCNAYLOR Posted June 12, 2017 Share Posted June 12, 2017 On 6/5/2017 at 9:20 AM, adamge said: Has anyone found a thumb rest that is a drop in replacement for factory and moves the thumb rest surface farther forward? My thumbs are longer than the factory rest is designed for, I end up with my knuckle riding on the top surface of the rest. I made my own Link to comment Share on other sites More sharing options...
muncie21 Posted June 23, 2017 Share Posted June 23, 2017 @RMCNAYLOR is that wide safety from CZ customs or elsewhere? BTW, nice looking thumb rest! Link to comment Share on other sites More sharing options...
chrisstophere Posted June 23, 2017 Share Posted June 23, 2017 On 6/12/2017 at 0:27 AM, RMCNAYLOR said: I made my own Nice looking *thumb rest [generic]*. I could definitely see that making some money on this and various CZ\USPSA FB groups with the lack of TS\Czechmate accessories like this. Link to comment Share on other sites More sharing options...
stuey93 Posted June 24, 2017 Share Posted June 24, 2017 Great Thread, Great Resource[emoji106] Link to comment Share on other sites More sharing options...
stuey93 Posted July 5, 2017 Share Posted July 5, 2017 Is there any ammo at least in .40 the TSO won't or doesn't like to eat?? HP/FP etc. Link to comment Share on other sites More sharing options...
DTO Posted September 3, 2017 Share Posted September 3, 2017 Has anyone found a holster option other than the Red Hill Tactical? Link to comment Share on other sites More sharing options...
adamge Posted September 4, 2017 Share Posted September 4, 2017 4 hours ago, DTO said: Has anyone found a holster option other than the Red Hill Tactical? Double Alpha Race Master or Alpha X. Link to comment Share on other sites More sharing options...
orthikon Posted September 4, 2017 Share Posted September 4, 2017 Has anyone found a holster option other than the Red Hill Tactical?Without the thumbrest, It fits in the Safariland 578 Pro-Fit GLS but the active retention is not 100%An ok intermediate option for $40 Link to comment Share on other sites More sharing options...
Ludde Posted September 4, 2017 Share Posted September 4, 2017 On 12.6.2017 at 7:27 AM, RMCNAYLOR said: I made my own CZ UB has a list of 3 other options when it comes to thumbrests for the TSO or Czechmate. Might be hard to find but I assume that seboweapons.com might be able to help since he is the CZ team shooter in Europe. Link to comment Share on other sites More sharing options...
DTO Posted September 4, 2017 Share Posted September 4, 2017 Thank you! I should have been more specific. I'm looking for a kydex holster preferably with level 2 retention for vigorous multigun stages. Link to comment Share on other sites More sharing options...
adamge Posted September 4, 2017 Share Posted September 4, 2017 The holsters I mentioned are retention holsters, though not kydex. I would suggest considering the DAA race holsters for multigun use. I've used them exclusively for years now. If I draw pistol first on a stage I leave the holster unlocked, so it is a speedy draw. But if it isn't first I turn on the retention, and then when I go to draw I just use my middle finger to activate the lever during the draw. Link to comment Share on other sites More sharing options...
muncie21 Posted September 13, 2017 Share Posted September 13, 2017 On 6/11/2017 at 8:22 PM, Croe said: Second match on day two and the FP, FP spring and FP retainer blew out. This happened to me at a local match. Caught it on camera. Link to comment Share on other sites More sharing options...
Hi_Im_Vinh Posted September 13, 2017 Share Posted September 13, 2017 1 hour ago, muncie21 said: This happened to me at a local match. Caught it on camera. damn Link to comment Share on other sites More sharing options...
mveto Posted September 13, 2017 Share Posted September 13, 2017 2 hours ago, muncie21 said: This happened to me at a local match. Caught it on camera. Thats crazy, how hard did the firing pin hit you when it cam flying backwards Link to comment Share on other sites More sharing options...
adamge Posted September 13, 2017 Share Posted September 13, 2017 That's friggin epic! Link to comment Share on other sites More sharing options...
adamge Posted September 13, 2017 Share Posted September 13, 2017 Why did you have a cut firing pin spring in a TS? I thought those were only good for IPSC-tuned Shadows. Link to comment Share on other sites More sharing options...
muncie21 Posted September 13, 2017 Share Posted September 13, 2017 (edited) It took a couple of click/rack/click cycles for me to figure out what happened. Interestingly enough, the parts did not eject too far or with any degree of force. My squad helped me locate the parts, which were all within a few feet of each other. Edited September 13, 2017 by muncie21 Link to comment Share on other sites More sharing options...
858 Posted September 17, 2017 Share Posted September 17, 2017 The factory bushing had more play than I though it should, I could wiggle the barrel with my finger. The 10X bushing takes all of the movement out. Link to comment Share on other sites More sharing options...
muncie21 Posted September 17, 2017 Share Posted September 17, 2017 @858 Any troubles getting the bushings in/out? I replaced the bushing on my SP01 with a 10x, it was pretty straight forward. I have heard about people putting the 10x in the freezer and such, to make install easier. Link to comment Share on other sites More sharing options...
yigal Posted September 17, 2017 Share Posted September 17, 2017 On 9/13/2017 at 4:09 AM, muncie21 said: This happened to me at a local match. Caught it on camera. Link to comment Share on other sites More sharing options...
yigal Posted September 17, 2017 Share Posted September 17, 2017 (edited) wowww first your gun lost rear sight and now this.(now you have custom rear sight) i glad that its ended with no injury . it looks like yours recycled skoda is falling apart . Edited September 17, 2017 by yigal Link to comment Share on other sites More sharing options...
858 Posted September 17, 2017 Share Posted September 17, 2017 4 hours ago, muncie21 said: @858 Any troubles getting the bushings in/out? I replaced the bushing on my SP01 with a 10x, it was pretty straight forward. I have heard about people putting the 10x in the freezer and such, to make install easier. I drifted the stock bushing out with a brass drift, a press would be better. The new bushing went in a little easier, no freezing. I had to chase out the pin hole to get the roll pin back in. The front sight was pretty tight and had to be drifted out with a nylon punch. Link to comment Share on other sites More sharing options...
muncie21 Posted September 17, 2017 Share Posted September 17, 2017 (edited) 22 hours ago, yigal said: wowww first your gun lost rear sight and now this.(now you have custom rear sight) i glad that its ended with no injury . it looks like yours recycled skoda is falling apart . It's all part of the game. I'm actually quite happy that all I've had to do to this gun (which was purchased used from a fellow USPSA shooter) was replace the rear sight (front now also, but that was my choice) and firing pin spring. How many open & limited shooters to you hear about that need to send their mags in for 'tuning' to allow them to run correctly? Mine? wipe them down every now and again and they run 100% along with the rest of the gun. I started shooting USPSA with Glocks because of their mechanical simplicity and low cost. However (for me) CZ provides a nice mixture of price, reliability, ease of maintenance and accuracy. Edited September 18, 2017 by muncie21 Link to comment Share on other sites More sharing options...
yigal Posted September 18, 2017 Share Posted September 18, 2017 (edited) my gear for tso muncie21 i agree with you Edited September 18, 2017 by yigal Link to comment Share on other sites More sharing options...
bulm540 Posted September 19, 2017 Share Posted September 19, 2017 (edited) The trigger in these things are awesome. I was able to handle one over the weekend. Edited September 19, 2017 by bulm540 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now