twowheels Posted December 30, 2016 Share Posted December 30, 2016 I've got a geissele SSA-E in my colt 9mm AR. I've run about 750 rounds through it and so far so good. Link to comment
bsand Posted December 30, 2016 Share Posted December 30, 2016 Giessele hi speed national match. I've got the match springs in it right now, but also have the service rifle springs. By far best trigger I've ever had. Sent from my Pixel using Tapatalk Link to comment
Shadowrider Posted December 31, 2016 Share Posted December 31, 2016 (edited) My Geissele Rapid Fire Trigger (B-GRF) isn't exactly rapid fire. More like single shot. No resetty. QC10 lower with all JP stuff in the upper. I guess a JP trigger is called for. Edited December 31, 2016 by Shadowrider Link to comment
Jimboslice Posted January 2, 2017 Share Posted January 2, 2017 On 12/29/2016 at 6:52 PM, Flatland Shooter said: Catching up reading on old posts and came across this one. My PSA Hybrid bolt also has little material below the firing pin. Compared the length of the Hiperfire 24C and the PSA hammer that came with the lower. They are almost identical in length. Hopefully that means all is well. how has the Hiperfire/PSA Hybrid come worked so far? I have the PSA but I'm trying to decide on what trigger to get for this thing. Link to comment
Flatland Shooter Posted January 2, 2017 Share Posted January 2, 2017 (edited) 52 minutes ago, XDMgunchamp278 said: how has the Hiperfire/PSA Hybrid come worked so far? I have the PSA but I'm trying to decide on what trigger to get for this thing. The Hiperfire 24C has been in the lower for the past 500 to 600 rounds with no problems. Note that I have it set for the lightest trigger pull (i.e. the heavier set of springs). I bought the lower directly from Palmetto State Armory. Since their uppers had been out of stock for several months, I went into it planning on building a 9mm upper. About that time I found a LGS in Louisiana that had a few PSA-9 uppers in stock. Got one of those. My only complaint about the gun is the barrel really needs to be throat reamed to take advantage of some good reloaded ammo. At the moment I'm loading 147 gr X-treme RN bullets over 2.8 gr N-320 at AOL of 1.085". Reasonably accurate to 35 yards and feeds and extracts well. Edited January 2, 2017 by Flatland Shooter Link to comment
Mulligan03 Posted January 3, 2017 Share Posted January 3, 2017 Anyone try he elfman 3 gun trigger? I have. A giesselle sa in my mpx right now but want a flat trigger and the elfman looks good but didn't know if is worth the money.. don't like the pad that is on the hyper fire Link to comment
resortboarder Posted January 4, 2017 Share Posted January 4, 2017 I run the Hiperfire Hipertouch 24E in my ATI MilSport 9mm and have had zero issues in about 800 rds. Link to comment
tyler2you Posted January 4, 2017 Share Posted January 4, 2017 1 hour ago, Mulligan03 said: Anyone try he elfman 3 gun trigger? I have. A giesselle sa in my mpx right now but want a flat trigger and the elfman looks good but didn't know if is worth the money.. don't like the pad that is on the hyper fire The pad on the Hiperfire 24C is optional. You can run it with just the straight trigger blade. Link to comment
Mulligan03 Posted January 4, 2017 Share Posted January 4, 2017 Tenfo.. what's it feel like without the pad? Link to comment
tyler2you Posted January 4, 2017 Share Posted January 4, 2017 51 minutes ago, Mulligan03 said: Tenfo.. what's it feel like without the pad? It feels pretty decent. Just a straight metal trigger blade. I like the way the pad locates my finger on the trigger consistently though, so I run it. Link to comment
Mulligan03 Posted January 4, 2017 Share Posted January 4, 2017 Thanks for the imput tyler Link to comment
rowdyb Posted January 4, 2017 Share Posted January 4, 2017 Is no one just running jp springs and a polish of their stock trigger? i'm leaning that way on one of my 9mm ARs..... Both just have stock mil spec triggers that are so-so. Link to comment
rishii Posted January 4, 2017 Share Posted January 4, 2017 I'm running the psa enhanced polished trigger group that goes on sale for 30 bucks http://palmettostatearmory.com/psa-ar15-pa10-enhanced-polished-trigger.html I lighten the hammer and run the yellow jp trigger spring and red hammer spring, and the jp anti walk trigger pins it breaks at 3 3/4 lbs. it's not as nice as my jp trigger groups, but pretty close Link to comment
OPENB Posted January 4, 2017 Share Posted January 4, 2017 Rowdy, that is what I'm doing right now. JP yellow springs on a stock DPMS trigger group. Not spectacular. I used to have a trigger group from Bill Springfield. He does triggers for DCM shooters that have a minimum pull restriction. Send him your stock trigger group, he does his magic and sends it back. I think I may do that again. Link to comment
JRM83 Posted January 5, 2017 Share Posted January 5, 2017 On 1/3/2017 at 6:04 PM, Mulligan03 said: Anyone try he elfman 3 gun trigger? I have. A giesselle sa in my mpx right now but want a flat trigger and the elfman looks good but didn't know if is worth the money.. don't like the pad that is on the hyper fire The Elftmann is the best AR trigger I have ever felt. I have two. Neither run consistently with my 9mm AR. KVP bolt. Link to comment
mscott Posted January 5, 2017 Share Posted January 5, 2017 On 1/3/2017 at 10:44 PM, rowdyb said: Is no one just running jp springs and a polish of their stock trigger? i'm leaning that way on one of my 9mm ARs..... Both just have stock mil spec triggers that are so-so. I have 1 lower with that set up and it's just fine. I put a Hyperfire in my 9mm carbine set up for 3 gun as I might need to take some more precise shots at longer ranges, but for USPSA I don't see the trigger as being that important for pistol stage stuff. Link to comment
al23 Posted January 9, 2017 Share Posted January 9, 2017 (edited) I was running stock polished mil spec trigger with JP reliability spring on a frontier glock lower with cmmg bolt. Had issues with trigger not resetting as well as pins walking out. KNS pins help with the other problem. Took JP springs out and has been flawless since. Edited January 9, 2017 by al23 Link to comment
blaster113 Posted January 9, 2017 Share Posted January 9, 2017 On 1/3/2017 at 9:49 PM, rishii said: I'm running the psa enhanced polished trigger group that goes on sale for 30 bucks http://palmettostatearmory.com/psa-ar15-pa10-enhanced-polished-trigger.html I lighten the hammer and run the yellow jp trigger spring and red hammer spring, and the jp anti walk trigger pins it breaks at 3 3/4 lbs. it's not as nice as my jp trigger groups, but pretty close I tried the ALG version of this trigger. My gun doubled then went full auto. Wonder why this type of trigger works in some guns and not others. Link to comment
JHOWARD Posted January 9, 2017 Share Posted January 9, 2017 I had the Hiperfire EDT 3 in my PCC and it was awesome for the money. Link to comment
ctay Posted January 9, 2017 Share Posted January 9, 2017 I have the ELF Ar10 trigger in my MPX. It feels great but has become very finicky on adjustment. Sometimes doesn't reset. They suggested that I locktite the adjustment screw. Once set and working it is a great trigger. Link to comment
mksm2016 Posted January 10, 2017 Share Posted January 10, 2017 Has anyone tried AR Gold yet? Link to comment
Suff Posted January 11, 2017 Share Posted January 11, 2017 I run a ARGold in my JP. It wouldn't always reset when 1st installed. I changed the hammer out with a SRGold hammer and it works perfect now. Link to comment
RigPig Posted January 11, 2017 Share Posted January 11, 2017 (edited) I ordered the Hiperfire 24c from Optics Planet last night for my home brew using a JP bolt. I noticed Optics Planet will give you a discount code if you have a page open on certain items for a few minutes. I was mulling over the Hiperfire vs Rise RA-535 and when I clicked back to the Hiperfire page, there was a code on the screen to save $35. Made the 24c $188.75 with free shipping, so I ordered two on separate invoices to get the deal on both. That's the best price I've seen, and I'll put the other one in my 3-gun rifle. Edited January 11, 2017 by RigPig Link to comment
1911luvr Posted January 13, 2017 Share Posted January 13, 2017 I ordered the Hiperfire 24c from Optics Planet last night for my home brew using a JP bolt. I noticed Optics Planet will give you a discount code if you have a page open on certain items for a few minutes. I was mulling over the Hiperfire vs Rise RA-535 and when I clicked back to the Hiperfire page, there was a code on the screen to save $35. Made the 24c $188.75 with free shipping, so I ordered two on separate invoices to get the deal on both. That's the best price I've seen, and I'll put the other one in my 3-gun rifle. Wow, I will have to try this!Sent from my iPhone using Tapatalk Link to comment
RigPig Posted January 13, 2017 Share Posted January 13, 2017 (edited) On 1/4/2017 at 1:49 AM, rishii said: Edited January 13, 2017 by RigPig Delete Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now