cbjan75 Posted July 19, 2015 Share Posted July 19, 2015 I just wanted to give a shout out to Tom at MOA Precision. They did a great job fixing my mess on my M3000. Shipped out, worked on and back at my door in 9 days. (includes the weekend). I opened the port, but I was afraid to brick the gun. I also noticed that they even touched up my polishing on my magazine tube. I think the logo is a nice touch. Thanks Tom!! Here's my mess The fix The added touch The "added touch" is a broken link. Link to comment Share on other sites More sharing options...
MarkCO Posted July 19, 2015 Share Posted July 19, 2015 If you have the one piece nut, just get a Nordic Mossberg MXT extension. If not, the MXT tubes are what we use Link to comment Share on other sites More sharing options...
cbjan75 Posted July 19, 2015 Share Posted July 19, 2015 Highly recommend the Benelli M2 extractor swap. Have had random hangups with the M3K since having it. Swapped it out on several others suggestions and ran it in a match yesterday with over 80 rounds of shotgun with 0 hangups. Really liking this gun. Link to comment Share on other sites More sharing options...
Garmil Posted July 20, 2015 Share Posted July 20, 2015 (edited) Opened up my port and under cut the trigger guard today. Edited July 20, 2015 by Garmil Link to comment Share on other sites More sharing options...
stick Posted July 21, 2015 Share Posted July 21, 2015 Here's the picture. Not sure what happened, it worked fine on my tablet Link to comment Share on other sites More sharing options...
doc187 Posted July 21, 2015 Share Posted July 21, 2015 Midway must have the benelli extractor springs in stock because mine shipped yesterday. Link to comment Share on other sites More sharing options...
cbjan75 Posted July 21, 2015 Share Posted July 21, 2015 Midway must have the benelli extractor springs in stock because mine shipped yesterday.Site still shows backordered. Link to comment Share on other sites More sharing options...
Ryan N Posted July 21, 2015 Share Posted July 21, 2015 Midway must have the benelli extractor springs in stock because mine shipped yesterday. Site still shows backordered. I suspect they are getting limited supplies from Mfg and filling back ordered in the order of which they were placed. Link to comment Share on other sites More sharing options...
rescue6 Posted July 21, 2015 Share Posted July 21, 2015 Mine shipped also. Link to comment Share on other sites More sharing options...
Huch Posted July 21, 2015 Share Posted July 21, 2015 I had "notify me"s pending for both the M2 and SBE springs. I got an email about the SBE ones (picked up 2) but not the M2's. I'm guessing that there was more demand for the M2 springs (since they're more popular and it's $1 cheaper for the exact same part) so whatever stock Midway got in that was allocated to M2's was eaten up by backorders, but there were still some leftover for those allocated for the SBE. They're both currently listed as out of stock. Link to comment Share on other sites More sharing options...
Ryan N Posted July 21, 2015 Share Posted July 21, 2015 I didn't realize the SBE and M2 springs were the same. I just got notice that the SBE springs shipped. I thought I had ordered them by mistake. Are they really the same? Link to comment Share on other sites More sharing options...
muddywings Posted July 21, 2015 Share Posted July 21, 2015 (edited) This is where I got mine (extractor spring AND extractor): http://www.gunpartscorp.com/Manufacturers/Semi-AutoShotguns-40729/M2Field-40591.htm?results=All This is the stoeger one that I pulled out. Some pretty deep scratches and quite the tight fit. The M2 version was a much nicer fit/product. disclaimer: I have not run it yet, and I was having a very occasional issue with FTE. disclaimer #2: I am not a professional photographer-sorry for the crappy cellphone pic. posting for general knowledge/consumption Edited July 21, 2015 by muddywings Link to comment Share on other sites More sharing options...
cbjan75 Posted July 21, 2015 Share Posted July 21, 2015 This is where I got mine: http://www.gunpartscorp.com/Manufacturers/Semi-AutoShotguns-40729/M2Field-40591.htm?results=All This is the stoeger one that I pulled out. Some pretty deep scratches and quite the tight fit. The M2 version was a much nicer fit/product. disclaimer: I have not run it yet, and I was having a very occasional issue with FTE. disclaimer #2: I am not a professional photographer-sorry for the crappy cellphone pic. posting for general knowledge/consumption That isn't a spring. Link to comment Share on other sites More sharing options...
muddywings Posted July 21, 2015 Share Posted July 21, 2015 (edited) This is where I got mine: http://www.gunpartscorp.com/Manufacturers/Semi-AutoShotguns-40729/M2Field-40591.htm?results=All This is the stoeger one that I pulled out. Some pretty deep scratches and quite the tight fit. The M2 version was a much nicer fit/product. disclaimer: I have not run it yet, and I was having a very occasional issue with FTE. disclaimer #2: I am not a professional photographer-sorry for the crappy cellphone pic. posting for general knowledge/consumption That isn't a spring. You are correct. I amended my original post. The site I listed has both products available. Edited July 21, 2015 by muddywings Link to comment Share on other sites More sharing options...
Vlad Posted July 21, 2015 Share Posted July 21, 2015 I didn't realize the SBE and M2 springs were the same. I just got notice that the SBE springs shipped. I thought I had ordered them by mistake. Are they really the same? As far as I can tell they are the same part number. Link to comment Share on other sites More sharing options...
Ryan N Posted July 22, 2015 Share Posted July 22, 2015 I didn't realize the SBE and M2 springs were the same. I just got notice that the SBE springs shipped. I thought I had ordered them by mistake. Are they really the same? As far as I can tell they are the same part number. Midway shows the SBE spring as a #70038x and the M2 spring as a 70038. Link to comment Share on other sites More sharing options...
MTGlass Posted July 22, 2015 Share Posted July 22, 2015 FWIW, Brownells has the Benelli spring (70038) & extractor (60177) in stock. I added them to an order yesterday because I'm not sure if my P3K will come with them installed or not. Link to comment Share on other sites More sharing options...
P.E. Kelley Posted July 22, 2015 Share Posted July 22, 2015 FWIW, Brownells has the Benelli spring (70038) & extractor (60177) in stock. I added them to an order yesterday because I'm not sure if my P3K will come with them installed or not. The P3K comes with those parts. Link to comment Share on other sites More sharing options...
MTGlass Posted July 22, 2015 Share Posted July 22, 2015 FWIW, Brownells has the Benelli spring (70038) & extractor (60177) in stock. I added them to an order yesterday because I'm not sure if my P3K will come with them installed or not. The P3K comes with those parts. Then I'll have a spare set. Link to comment Share on other sites More sharing options...
stick Posted July 24, 2015 Share Posted July 24, 2015 (edited) Does anyone have a match saverz installed on their m3000? If so, can you post pics of the location. After removing the fore grip, I'm not sure if I have enough space to safely drill the hole to install the screw. Edited July 24, 2015 by stick Link to comment Share on other sites More sharing options...
cbjan75 Posted July 24, 2015 Share Posted July 24, 2015 Does anyone have a match saverz installed on their m3000? If so, can you post pics of the location. After removing the fore grip, I'm not sure if I have enough space to safely drill the hole to install the screw. Don't do like I did and make sure you like where it is before you drill. The other hole it initial location and discovered it was too far away. Link to comment Share on other sites More sharing options...
stick Posted July 24, 2015 Share Posted July 24, 2015 Does anyone have a match saverz installed on their m3000? If so, can you post pics of the location. After removing the fore grip, I'm not sure if I have enough space to safely drill the hole to install the screw. Don't do like I did and make sure you like where it is before you drill. The other hole it initial location and discovered it was too far away. Thank you Link to comment Share on other sites More sharing options...
Oskino Posted July 25, 2015 Share Posted July 25, 2015 (edited) here is another option Edited July 25, 2015 by Oskino Link to comment Share on other sites More sharing options...
Huch Posted July 25, 2015 Share Posted July 25, 2015 Jesus you took that port down low on the left side. That's halfway down the mag tube; any lower and you're be pushing the shells UP to get them to load. That being said, it must load fast as hell. Had any Any issues with cutting that deep? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
MarkCO Posted July 25, 2015 Share Posted July 25, 2015 Actually, that kind of cut is slower than a more shallow taper out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now