Rennie Posted January 29, 2011 Share Posted January 29, 2011 HK P7 M13. Its the only gun I have that is totally stock/unaltered. Link to comment Share on other sites More sharing options...
JakeMartens Posted January 30, 2011 Share Posted January 30, 2011 I have tried the CZ SP01 route, I have had 2, one tuned by Angus and another tuned by Chris Johns at CZ. Love the feel of the gun, just couldn't get used to the trigger, but to be honest I didn't really give it the time it would need to adjust. I have a M&P Pro 9 right now, but got it at the end of the season right when I had elbow surgery so I have not done anything with it. Link to comment Share on other sites More sharing options...
dangucci Posted February 1, 2011 Share Posted February 1, 2011 I mostly shoot single stack but for when I do get around to shooting production I have a Beretta 96 with the Wolff trigger conversion unit, d spring, metal trigger, and inox magazine release. I will be working up a load with BBI 180's and clays. Link to comment Share on other sites More sharing options...
Golden Bear Posted February 2, 2011 Share Posted February 2, 2011 Bring what you got, shoot what you brung, have fun! Glock 26 w/ Glock night sights. Bladetech Phantom holster. Fobus double mag paddle pouches. Walmart leather belt. UMC bulk or Win white box. Link to comment Share on other sites More sharing options...
Jeff Matzka Posted February 2, 2011 Share Posted February 2, 2011 (edited) CZ SP-01 Shadow w/Dawson .090" plain black front sight, thin aluminum grips, skateboard take on grips, front strap, and backstrap. Bladetech DOH holster Double-Alpha Belt CR Speed mag pouches (4) Load: Zero 125 gr. JHP over 4.2 grains VV N320, Federal primers. Various headstamp brass. Edited February 2, 2011 by Jeff Matzka Link to comment Share on other sites More sharing options...
Maks_H Posted February 4, 2011 Share Posted February 4, 2011 Tanfoglio Stock II Stock rear sight with Henning FO .105 front sight CR Speed Versa pouches and WSM II holster on DAA competition belt 124gr lead or copper plated bullets with REX I or VV N320 Link to comment Share on other sites More sharing options...
CZinSC Posted February 4, 2011 Share Posted February 4, 2011 CZ SP01 Competition Hammer Trigger job by Angus Competition Rear Sight Aluminum Grips with lots of 3M tread tape BladeTech DOH holster SpeedSec 90 degree mag pouches Zero 125 FMJ, VV N320 4.3gn 1.155" OAL Link to comment Share on other sites More sharing options...
usmc1974 Posted February 5, 2011 Share Posted February 5, 2011 (edited) They say a picture is worth a thousand words. Edited February 5, 2011 by usmc1974 Link to comment Share on other sites More sharing options...
kevin c Posted February 5, 2011 Share Posted February 5, 2011 G34 or downloaded G35, both wearing TruGrip or equivalent, Warren/Sevigny FO sights, Vanek Classic GM triggers, 11 or 13# ISMI springs riding over short tungsten or brass guide rods. I keep the extended mag release (I'm apparently one of the few who don't knock into it, even with the lightened release spring I use). Blade Tech DOH and Ready-Tac's on a CR belt. Match ammo 9mm MG 147 CMJ's over 3.6 gr N320 at 1.125, 40 MG 180 JHP's over 3.2 regular Clays at 1.135. Mixed brass, Win or Federal primers. Link to comment Share on other sites More sharing options...
98sr20ve Posted February 5, 2011 Share Posted February 5, 2011 I shoot a G34 (9mm) with a KKM barrel. I did my own trigger work and it's plenty good enough. Lightweight striker, extra power return spring, polished, Stock Glock Connector. It has a large frame Wolff guide rod and a 15lb spring. I make my own 155gr lead bullets, with 3.2 grs of Solo 1000 loaded to 1.080" Dawson adjustable Sights. It's a very reliable gun, fires off my CCI primers with no problems. Even dirty it just runs and runs and runs. Link to comment Share on other sites More sharing options...
dlaroe Posted April 3, 2011 Share Posted April 3, 2011 G17 w/ Glock 3.5LB connector, trigger spring, $.26 trigger job. Wearing Ameriglo Combat sights and 3M stair tread tape. Worn in Bladetech injection molded holster & mag pouches on a Wilderness 5 stitch instructor belt. I feed it the cheapest factory ammo I can find. Link to comment Share on other sites More sharing options...
E K Posted April 3, 2011 Share Posted April 3, 2011 M&P9L Bur well competition trigger with pe-travel reduction F.O. Front site Atlanta Arms 147gr ammo CR Speed belt Blade tech DOH holster Ready Tactical mag pouches I hope to begin reloading later this year. Looking to eventually purchase a Dillon 550 press. I'm not looking to change platforms but those open guns sure are pretty! Link to comment Share on other sites More sharing options...
bulm540 Posted April 9, 2011 Share Posted April 9, 2011 Glock 22 with challenger trigger group. Link to comment Share on other sites More sharing options...
ben b. Posted April 9, 2011 Share Posted April 9, 2011 I bet I'm the only one who posts this: Steyr M40A1 or M9A1, depending on mood. BT striker spring cups & custom smiley-face guide rod. 147 gr lead/jacketed/moly & Solo1000 Link to comment Share on other sites More sharing options...
Remington4Life Posted April 10, 2011 Share Posted April 10, 2011 G34, .25 trigger and some springs, FO front, stock rear and rubber tube grip. Link to comment Share on other sites More sharing options...
GrumpyOne Posted May 14, 2011 Author Share Posted May 14, 2011 Gotta put this up....Just changed from the XDM 40 platform to an Angus Hobdell CZ SP01 Shadow, and could not be happier with the change! Link to comment Share on other sites More sharing options...
BBoyle Posted May 14, 2011 Share Posted May 14, 2011 Just got my first real production gun this past September. As of 2 days ago: Glock 35 Jager captured steel guide rod ISMI 13 pound spring Skateboard tape on grip Sevigny Competition Sights (green FO) Glocktrigger.com challenger kit. Load is 1.135 oal Precision Delta 180 FMJs with 3.8 grains of tight group and CCI spp factors to 135. Brian Link to comment Share on other sites More sharing options...
bulm540 Posted May 15, 2011 Share Posted May 15, 2011 glock 22 ( all I have for production). Challengrr trigger kit. Warren comp sights. 180 grs molys with 3.4 ramshot competition. Link to comment Share on other sites More sharing options...
D roc Posted May 19, 2011 Share Posted May 19, 2011 Glock 35 4lb. reduced power striker spring reduced power safety block spring extra power trigger spring 13lb. Recoil spring Stainless steel guide rod Lightning Strike Titanium Safety Plunger 180 laser cast, 3gn bullseye, 1.135" oal Blade tech doh CR speed belt CR speed mag pouch Horrible night sights Link to comment Share on other sites More sharing options...
Son Of The Griz Posted June 13, 2011 Share Posted June 13, 2011 (edited) I just picked up my Production gun *Glock 34 (OD Frame) *Warren / Sevigny sights - black rear w/ FO front *standard Glock slide stop (non-extended) *(coming in the mail) TruGrip USA pre-cut grip tape *Standard G17 magazines *Factory ammunition - normally 124gr 9mm American Eagle (Federal) Holsters / Pouches are a mish-mosh of what I've bought for Glock gear over the past couple years *5.11 Blade Tech Revolution *Blackhawk & Uncle Mikes LE kydex mag pouches *belts... either heavy leather or "tactical" nylon belt I may upgrade to Kytac or Comp-Tac holster & mag pouches, but I'm saving pennies for a Limited rig & reloading gear. I don't want to "invest" too much more into my Production equipment until it actually helps push me to A or M. Edited June 13, 2011 by Son Of The Griz Link to comment Share on other sites More sharing options...
h2osport Posted June 13, 2011 Share Posted June 13, 2011 My production gun is a gen 2 Glock 17 with a Vanek drop in trigger kit. I am running a factory rear adjustable sight, and a Hiviz fiber front. Uncle Mikes holster and blade Tech mag pouches. To be honest, I have not been shooting production in the last couple of years. I would really like to check out the CZ production guns and maybe the M&P. Randy Link to comment Share on other sites More sharing options...
Torogi Posted June 13, 2011 Share Posted June 13, 2011 CZ SP-01 9mm, Australian Barrel, Minked, almost each single part of the gun is somehow modified or polished RAMI safety, FO front, LPA adj rear, competition hammer, 13# main, 11# recoil, CZC AL grips, 85 trigger, SS guide rod. CR speed magpouches and belt, Blade-tech DOH. Load, 147gr MG FMJ, 3.4gr N320. Link to comment Share on other sites More sharing options...
ck1 Posted June 13, 2011 Share Posted June 13, 2011 CZ 75 Shadow (newly USPSA-legal short dustcover variant), 11lb recoil spring, 13lb hammer-spring CZ 19rd mags w/ +10% mag springs Dawson Precision .170"T x .90"W black-serrated front sight VZ G10 grips Higher, lower-profile CZ-75/85-style safeties in place of the lower/extended CZ-75SA/Shadow-style safeties Production-legal frontstrap checkering (skateboard tape). Cz-85 "original profile" trigger Blade-Tech DOH holster (minus the DO part), Blade-Tech kydex double mag pouch, 2 tacticalkydex single mag pouches. 5.11 1.75" Casual leather belt or Blackhawk 1.75" Operator's belt. Cheap factory FMJ, usually 115gr and usually from Wallymart (WWB, Federal Champion, UMC, etc.) - I've ran Glock's, M&P's, and STI's, the CZ works the best for me and I wouldn't trade my Shadow for one of each of them. An SA trigger as good as the finest 1911's, DA pull as good as the best Revo's, in a gun that runs like a steel Glock yet feels better in the hand then all of them IMO. Plus, I take off 2 of the mag pouches and throw on tge fishing vest and I'm GTG for IDPA SSP and ESP. The rig is solid, the shooter not so much... Link to comment Share on other sites More sharing options...
Maksim Posted June 13, 2011 Share Posted June 13, 2011 Dont shoot much production, mostly SS and L10, however the rig is a Sig P226 USPSA, Serpa holster, Safariland pouches, on a DAA belt. Load for 9mm is 5.0 or 5.2 grains of WSF under 124 grain jhp Link to comment Share on other sites More sharing options...
beltjones Posted June 13, 2011 Share Posted June 13, 2011 CZ SP-01 9mm, Australian Barrel, Minked, almost each single part of the gun is somehow modified or polished RAMI safety, FO front, LPA adj rear, competition hammer, 13# main, 11# recoil, CZC AL grips, 85 trigger, SS guide rod. CR speed magpouches and belt, Blade-tech DOH. Load, 147gr MG FMJ, 3.4gr N320. I'm pretty sure that Australian barrel isn't Production legal in your SP-01 under Appendix D4, line 21.3. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now