Aircooled6racer

Hello: You are not the first with the DPP getting dimmer. You will like the Holosun 510C. Just remove the cover to make it lighter. Thanks, Eric

Hello: A simple comp is very easy to make. Round stock and drill holes through it. Making a comp that works well is the challenge. Thanks, Eric

Hello: Like I have said before I think alot of the slides now are coming from the same supplier since so many are breaking or cracking in the same place. Thanks, Eric

Hello: I am just using the red dot with just the dot. The circle is pretty large on the 510C. The circle on the 507C is a better size for USPSA pistol matches. I know some that are using just the circle for all steel matches and they seem to really like it. Circle and Dot was just too busy for me. Thanks, Eric

Hello: I did the grip myself. Clear 2 part epoxy, black blasting grit and a little time making the grip rough to fit my hands. Thanks, Eric

Hello: I am still testing the Holosun 510C on my open pistol. I really like the large glass window and the bright dot. No problems so far after only 1500 rounds or so. I did remove the shield to make it lighter which it actually lighter than a metal C-More. Some of the other red dots have not been holding up around here very well. C-More slide rides seem to last for me a very long time since I have never had one break yet. Thanks, Eric

Hello: I am using a Gen 2 right now for Carry Optics. I am using a Brownells Gen 3 slide cut for a RMR. I am using a Holosun 507C and like it alot. By using another slide I can use the pistol for Carry Optics and Limited Minor or Production. If you have any questions I would be happy to help. Thanks, Eric

Mark, I know where a nice Isler carbon handgaurd lives that could be yours. Thanks, Eric

Hello: I wouldn't use a Cheely/CK Arms slide since I have seen 3 of them crack here in a low round count pistol. As I said above I think lots of the slides are coming from the same source. I still like the Caspian slides. Good steel in them and mill up nicely. I wish PT would sell their slide again. Thanks, Eric

Hello: It is not so much that the frame wears out it is the rails coming loose in the frame. If you are thinking of shooting open you may want to consider Carry Optics also. Since Carry Optics now has the 140mm rule it is alot more fun. Only down side is shooting minor but that just makes you a better shooter since you have to hit more Alphas. At least I try to. Thanks, Eric

Hello: I would get either the G17 or the G34 for production knowing that I would make it a Carry Optics pistol in the future so the MOS model are the ones I would choose. Longer sight radius for Production but shorter slide for Carry Optics. I'd get the G17 MOS Gen 5 with front serrations. NO co-witness sights though. Or you could get two top ends for the lower. Thanks, Eric

Hello: I would get your glasses made for target focus. With a dot you want the target in focus and bring the dot to the target. Shoot with both eyes open. A little test you can do to train your eyes to work is tape off the front of the glass on your dot. Shoot the targets and with both eyes open so you can see the dot and the target. Thanks, Eric

Hello: If you reload to 1.140" OAL you will not have any issues with any bullet profile I have tried. I don't think you will need the flashlight weight with a Glock 34 to reduce muzzle flip. You may want to try some 147's as well. Since you are a revolver guy the Glock will be easier for you to shoot. Thanks, Eric

Hello: Just pick a frame you like that has the features you want. The slide is the real trick now. I would only use Caspian slides since the rest all seem to be lacking or breaking in weird places. I have seen 4 slides from 4 different makers all crack in the same place. That tells me they are all coming from the same supplier. PT does not sell just the slides any longer but they were good also. Thanks, Eric

Hello: I tried alot of different lens colors on my Rudy Project Rydon glasses. For general all around use I am using the brown tint lens. We have bays here with shade and some with wide open sun. Most of the ground cover is either grass or gravel. On overcast days I use the photochromic clear-black. The muiltilaser orange and red work great for fishing. One thing I know is that everyones eyes are different and as you get older your eyes change on what you like. I found the racing reds where too bright for my eyes even 14 years ago. The last thing I learned was at altitude you need darker lenses than at sea level. Thanks, Eric

Hello: I know quite a few people who run just 170's. I also know some that use all 140's with different base pads to give them up to 27 rounds. There is always a place to reload on the move so choose your magazine setups for the stage you are running. Thanks, Eric

Hello: We have a bowling pin plate rack here at around 15 yards that can be double tapped. It just takes practice and a good foundation with the rifle. I find the young guys can move faster and have better eyes. Thanks, Eric

Hello: You may want to try some lighter bullets in the 135-155 range. Lighter bullet more gas. Thanks, Eric

Hello: Accuracy will be your guide. If it locks up the same everytime and the accuracy is good leave it alone. I have seen some really tight slide to frame fit pistols that would not shoot a good group at all. I would rather have a loose fitting slide to frame fit that was accurate and 100% reliable than a tight unreliable one. Thanks, Eric

Hello: On a 32 round USPSA pistol match I run 36-38 rounds in my mags. If I need more than that I am in trouble. If it is a 34-36 round stage I push it up to 40 rounds. I don't like using super long magazines and I try to be accurate with the rounds I do have. Thanks, Eric

Hello: You will have to depress the plunger as well. Check to see how much drag you have on the striker. Thanks, Eric

Hello: I didn't like the Glock 34 for CO either. I have gone to the Glock 17 with a Brownells slide and like it alot more. I think the XDm maybe a better if you are used to 1911 ergos and don't like the Glock grip angle. Thanks, Eric

Hello: I would run it without a comp and just put a dot on your Glock 35. That way you will not have alot of money into it and if you use a red dot that you can use on an open pistol you can just transfer it over. Another option for you would be to build a 9mm Carry Optics top end for your Glock 35 lower. Change out the ejector to a 9mm and you should be good. If you end up not liking shooting a dot you can then sell the whole top end. Thanks, Eric

Hello: Why not just put a red dot on your Glock 35 and shoot it in open to get your feet wet? Then if you decide you like shooting open then get a open pistol. Just my thoughts and to save some cash. Thanks, Eric

Hello: Could the striker be dragging in the sleeve in the slide? Also check to see if the plunger spring is not bent rubbing on the striker. Sounds like something is dragging. Thanks, Eric