9146gt

Maybe this should be a separate thread. Has anyone sent 9mm major ammo in for pressure testing...at a company like HP White,and why not? Seems to me that is the only way to answer all the pressure issue questions. Tom

Try Racing Radios in NC, they make the molded ear plugs with speakers for drivers and crew who wear helmets. Tom

Looking at Production or Metallic? Keeo in mind there are only 12 shoots at 50 yards in the Practical event. But you must shoot the same ammo at all four events @ minimum of 120 Power Factor. A Hornaday .357 125 grain projectile will pass thru my 986 cylinder with a slight push. My 929 will shoot under 2" at fifty yards with Zero and Hornady HAP projectiles. Winchester Auto Comp and Vit N330 have worked well for me. Speed is your friend with the 9mm...1150 FPS or higher will probably show the best results at 50 yards. While "bounce " on the barricade my be an issue. X ring on the NRA target is 4" and the 10 ring is 8". Revolvers are a blast to shoot in NRA action pistol. Tom

1 in 250 mm. Tom

Same thing happens with the first shot from a new mag when shooting from a Ransom Rest first shot almost always low. Yes it does seem to be slide speed related. I have seen many first shots 5" or lower. When I asked Brian Zins about this he smiled and said my first shot is always on call? Tom

One of my 929's will allow the cylinder to spin when closed loaded with 9X21 in moon clips ...the other will not. Tom

I was always shooting high...so i now shoot without shoes. Problem fixed Tom

I will bet all non tox primers will look like that Tom

Many of the ACE hardware stores now have some gun screws in stock that include many of these sizes. Tom

+1 on AHI load Tom

And length of the handle. Tom

Send your ammo here to have it pressure tested. http://www.hpwhite.com/ Tom

5.34 gr WAC Zero 115 conical JHP 1.09" very accurate in my 16" PSA. Tom

Dillon aero and helicopters is where it is at Tom

I have seen the carbide inserts on Dillon dies come loose. Tom

I check all new loads for group size first. Then fine tune from there.Chrono last. Tom

Where did Beretta move the serial number to on the current build guns. Tom

Second the 1050 Tom

This is the Zero copy of the HAP projectile. http://www.rozedist.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RZD&Product_Code=R135-A&Category_Code=ZBJ-9MM Shoots well out in all of my 9mm guns...and 1" at 50 yards in my Bullseye 1911. Tom

Solo 1000 is still available to commercial reloaders. Tom

It seems Nammo Lapua is setting up there own distrubitions in the states next year. n330 is said to be on the list of powders that will be available. Tom

Grey and white Scotch Brite are finer than green. Tom

And your invoice say's ?? Tom

Autocomp is a good powder for 9mm. Do not be surprised when group size shrinks with FPS increase. Tom

Sometime next year Hodgdon will no longer be the importer of Vihtavuori powder.Maybe the new importer will import all the Vit powders. Tom